i have an excel file in which i habe around 25 clients and their have different percentage set on as a comminsion on their net sales. the problem is that i was using if formula but is not accepting after 7 times.i studied that we cannot use if function more than 7 time..
so which formula i can use..
I have a cell, lets call it A1, w/ an IF statement referencing another cell, which is a function of two values taken from RTD. A1 is either blank or reads "One." I want another cell to tally the # of times that A1 takes on the value "One."
The issue:
I've tried approaching this by using Worksheet_calculate and an IF/Then statement to add 1 each time Range("A1") = "One" however this doesn't work because it keeps adding 1 while A1 reads "One." The calculations seem to fire off every milisecond, so if "One" flashes for 0.5 seconds, I get 500, and if it flashes for 3 seconds, I get 3000. For both cases, I'd like it to just add 1.
I have created a userdefined function. the Idea is for the user to calculate the difference in hours and minutes. The input would be like budtime = 30 , realtime = 1.25 the answer I would like to have is 28:45 (28hours and 45 mins). Im aware that I can format the cell manually with [h]:mm but I'd like the function to do it.
I have written this:
Function RT(BudTime, RealTime)
RT = Format(((CDec(BudTime) - CDec(RealTime) / 24)), "[h]:mm")
End Function
In my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
I'm looking for a formula that will calculate the difference in times between specific times while working with a 24 hr clock. Please see details below:
E3 provides the start time of 4:00
H3 provides an end time of 15:30
If an employee works betwen the hours of 0:00 (midnight) to 5:59, this is considered DIFF hours and is therefore the number I am seaking. So for the data noted above, the total DIFF hours worked is 2 hours.
I need a formula in excel to convert start times and end times and minus out lunch time taken and then give total hours worked. For instance,
Column D Column E Column F Column G
Start End Lunch Total Hours Worked
10:01AM 7:08PM 1:01 (formula to convert hours worked)
I thought I found a formula that would work, but it's not working. Each month I have to count the number of service tickets that have arrived between certain time ranges. They want to gauge during what times we seem to get the biggest batch of service requests.
6 am to 10 am
10 am to 5 pm
5 pm to 6 pm
6 pm to 6 am
The format of the cells are:
1:21:19 AM
1:28:08 AM
1:35:48 AM
1:49:19 AM
2:17:02 AM
7:14:38 AM
7:29:12 AM
8:08:28 AM
8:51:48 AM
8:54:19 AM
The formula I tried for 10 am to 5 pm: =COUNTIF(B2:B677,">="&TIME(10,0,0))-COUNTIF(B2:B677,">"&TIME(17,0,0))
It gives a result of 676, and I know from manually counting that there is only 327 cells that have a time between 10 am and 5 pm.
I included a spreadsheet that lays out what I am looking to do, basically I copied some times and speed from net. It shows up in non 24 hour format. I need to find the times and an associated speed for each row (day) directly before and after my inputted desired time. I've searched for days, tried different formulas with index,match, lookups,timevalue, time, etc and even tried using other peoples vba code without success.
View 9 Replies View Relatedi need to calculate between time. If a person is working between 8 till 12 and then 1 till 5 i need to count the instances between these times.. so if somebody is working between these hours a 1 should appear and if they have finished their shift or are on lunch then this should change to 0
e.g.
8.00 | 8.30 etc.. 12.30 | 13:00
1 | 1 | 0 | 1
I'm having trouble using the worksheet copy command in a VBA subroutine. I have the following line in my code:
[Code] ........
When I step through my code and execute this line, the sheet is copied as expected and put in the correct place, but then instead of the next line of code being highlighted, the pointer jumps to the first line of a function (in a different module) in my code.
Another interesting dilemma to solve. Using this formula:
View 2 Replies View RelatedFunction Haversine has correct value in debugger but in cell it has the same value as Haversine2. Is this a known bug?
Public Function Haversine(lat1 As Double, long1 As Double, lat2 As Double, long2 As Double) As Double
Dim temp As Double
[Code]....
In Mr Excel's Pod Cast on April 12th, he showed how to use the OFFSET function to define a range inside a SUM function. Then he had Conditional Formatting that would highlight the range that was being summed. Can anyone tell me what the formula would be inside the Conditional Formatting dialog box to get the OFFSET range to have a certain format?
View 9 Replies View RelatedHave a spreadsheet i need to add together a large array of durations which are recorded in hours minutes and seconds. They are all formated like 0:00:00 and will likely run over a 24 hour period. Adding two of these together is fine but when i try and add multiple using =(A1:A5) the result returned is always 0:00:00. I have tried formatting them as both general, and time in format H:MM:SS. Have also tried doing a pivot table changing the field options to SUM of call duration. Screenshot attach with column is question i'm trying to sum.
View 5 Replies View RelatedI have a bunch of recordings on my DVR. So I put the titles and description onto a spreadsheet each in their own column. Then I created a "length of time" column. So why, in this attached spreadsheet, does the "grape" total autosum all the rows in that column correctly but the "cherry" total does not total it's column correctly?
I looked at the format of all cells in both columns and they are both set at h:mm.
I have a function
VB:
Function f1(Matrix As Range)
'Does something and returns f1 = a double
End Function
And a second function which defines and constructs a matrix of doubles to use as an argument in f1 to return a double:
VB:
Function f2(dD As Double)
Dim MatrixRed() As Double
Redim MatrixRed(1 To dD, 1 To 10)
For i = 1 To dD
For j = 1 To 10
MatrixRed(i, j) = i * j
Next
Next
f2 = f1(MatrixRed)
End Function
I get an output error (#VALUE). I think it has something to do with MatrixRed not being a range anymore?
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
I have created a List in excel of various tasks. (See attached example.) Each row contains one cell with a function which equals the cell above it and to the right. So the function for cell C3 would be D2. The only importance is that the cell mirrored is always the cell one above and to the right. However, now I would like to be able to rearrange this List, but the “one up and to the right” function will now be all over the place.
Is someone aware of a function which will target a relative location instead of an exact cell?
I keep getting the "You've entered too many arguments for this function" error.
Here is the formula:
=IF(B15=D40,E40,"",IF(B15=D41,E41,"",IF(B15=D42,E42,"","Invalid Shipping option")))
I am trying to nest an IF function with a CEILING function. If C10 is < 3.5, make it 3.5, however, if C10 > 3.5, CEILING (C10, 5)
right now it looks like:
If (C10
I have been looking around have this much code from this site, modified. What I am trying to do is calculate numbers by a position with cells D through K having numeric values. I have 'hardcoded' the cells (D2, E2, etc in the code below), but in reality I only want the current row (so if the formula is on the 2nd row, I want D2, if it is on the 3rd row, I want D3).
My problem is obviously the formula isn't working because I am not correctly tying back to the spreadsheet (Positioncalc.xls). When I put the formula in the spreadsheet it works, but in my script I get 0 everytime.
My Script:
Function Position(rCell As Range, Optional RightPosition As Boolean)
Dim vResult
Select Case rCell.Text
Case "QB"
vResult = (2*D2) + (2*E2) + (2*F2) + (4*G2) + (2*H2) + (1*I2) + (4*J2) + (3*K2)
Case Else
vResult = "Invalid Position"
End Select
If RightPosition = True Then
Position = vResult
Else
Position = "Position not valid"
End If
End Function
So, when I put =Position(A2,True) I expect to see the formula results of those cells calculated based on the position (QB, HB, etc with their unique formulas).
My next challenge after this is to highlight certain cells based on the Position. So if A2 = QB, I want cell D2 boldface and Red, etc. I have seen some scripts on colors and such here, so I might be able to figure it out.
In cell N1 I have a time.
In cell R1 I want a formula that says if R1 is between 6am and 10pm, then return a 7.
how to use time in a formula.
I am trying trying to calculate the amount of time students view videos. I understand I should use [h]:mm:ss but excel continues to convert entries such as 0:14:59 (0 hours, 14 minutes, 59 seconds) to 12:14:49 PM both in the cell and the function bar.
The problem gets complicated because I have entered the data with two different formats; some in h:mm and some in h:mm:ss'
1) Is there an easy way to sum the duration time so it accurately reflects total hours:minutes:seconds?
2) Do I need to reformat or re-enter data to make it work?
3) If so, is there a macro to do it?
This has been a bear, (40 students by 30 videos) all hand coded.
How can i work out how long has passed between times, in excel.
my times are formatted as times eg 16:00 and 01:00 i then need them in base 100 so as i can work out labour percentages.
Book1.xls
Here is some dummy data and explanation with my problem...
I can't use usuall sumproduct because array of date doesn't match with data array... Since names are in alphabeticaly order you can see that Dave is sometime at first, second, third position.. there is more names etc...
I need to see how many times some name appear in last x time...
in cell F5 I would like to know how to count the times between 13:00 am and 14:00 so if theres 3 times it will show a 3 i havnt got a clue what formula to use.
View 14 Replies View RelatedI need a formula that gives me the difference between two different times
EG. 11:14:56 and 16:14:26, i want to find the difference/time between the two. Hope i'm making sense...
Also, does the time have to be in a time format on excel for the formula to work?
I had an excellent response last time I posted here, this time I’m stuck again with a new formula. I’m trying to calculated amounts between different times, but keep tying my self in knots with complicated IF formulas.
Is there an easier way to work out hours worked between 2 times, but too complicated things further I need three separate amounts so I’m guessing I’ll need three separate formulas
Hours between 00:00 – 06:00
Hours between 06:00 – 19:00
& hours between 19:00 – 00:00
An example could be, 05:00 – 20:00 should be 1,13,1
For simplicity sake I will put what I have in close proximity cells and what my issue is. I am taking a number A1 (7.7) and turning it into time A2 =A1/24 (7:42)
A3 (18:00) Which is our work start time. I am taking 7:42 min estimated work day hours and adding that to our start time of 18:00 for A4.
A4 =A2+A3 (1:42) This tells me that we should get done around 1:42 am
A5 I enter the actual time we finished. Let's say (2:23)
A6 =TEXT(MAX($A$4:$A$5)-MIN($A$4:$A$5),"-H::MM")
This gives me an answer of (23:19), but if I type over the formula in A4 (1:42) which is the answer to the formula and already has that number there, I get the answer (0:41) in A6 and that is the answer I want. I can't figure out why I can't get A6 to give me an answer of (0:41) with a formula in A4. I even tried having another cell formulate A4 and then A4 =that cell and it is still the same.
I'd like to change only all the times as C2.
Which formula could I put in B1?