Time Between Times
Apr 21, 2007How can i work out how long has passed between times, in excel.
my times are formatted as times eg 16:00 and 01:00 i then need them in base 100 so as i can work out labour percentages.
ADVERTISEMENT
Get Closest Times Above & Below Specified Time
Jul 24, 2007I am trying to pull the closest times above and below and some other data from various worksheets. I've included a sample worksheet that has a dumbed down version of the tables and sheets.
I am having problems pulling the correct times and believe my error is in this part of the bigger formulas (
COLUMN(INDIRECT(portlookup&C5&"HEAD"))-COLUMN(C1),3)+1<=2
which breaks down to
COLUMN(INDIRECT(ABYJANHEAD))-COLUMN(C1),3)+1<=2
I don't think this is accurately telling my formula how to look at the table and pick the right time. I've tried different mod divisors and still can't get it to pull the right time.
Time (clock) Times A Number
Apr 2, 2009I have a start time in one column, end time in another and a column with the difference between the two. In another column I have profit. In the last column I have profit per hour where I divide the profit by the hours, but since one is hours and the other is a number it gives me an error.
View 4 Replies View RelatedCalculating Turn Around Time Between Two Times
Mar 12, 2009i want to calculate the TAT between two times. the TAT target is <= 2 hours. i used the following formula
a1 has 3/13/2009 (received date)
b1 has 7:08 AM (received time)
c1 has 3/13/2009 (completed date)
d1 has 9:08 AM (completed time)
e1 has TAT formula :- '=IF((D1-B1)*1440<=120,"Met TAT","Not Met TAT")
however this formula does not work in the following conditions.
In these conditions, it is considered that TAT is met.
1. When the difference in time is <=2 hours .... for TAT calculation, on working days and working hours are taken into consideration.
To illustrate.
Day begins : 8:00 AM
Day ends : 4:00 PM
If job is received at 3:30 PM and completed the next working day by 9:30 AM, then it is considered TAT is met.
calculation = 4:00 PM - 3:30 PM = half hour + next day's 9:30 AM - 8:00 AM = 1.5 hours, therefore, total working hours used to complete the job is within the agreed TAT.
If job is received and completed on non working days and during non working hours, it is considered TAT met.
If job is received almost at the end of the day, say, 3.30 PM and job is completed at 8:00 PM same day, then it is considered TAT met, rationale, only half an hour of working hours used to complete the job.
Compare Range Of Times Against Set Time
Jan 7, 2008I am trying to get rid of some duff data by running a comparison to a fixed value on a defined range. However, the macro tries to compare the cell value (00:05:00) as a decimal value.
I think I need to use the format function to get round this.
For Each timecheckcell In range("g3:g60")
timecheckcell.Value = Format(MyTime, "h:m:s")
If timecheckcell.Value <> "00:05:00" Then timecheckcell.Offset(0, 1) = ""
Next
How To Calculate The Average Time Over A Number Of Times
Apr 28, 2014I am looking for a way to calculate the average time, over a number of times.
So basically, would have different times in 24 hour hh:mm:ss, all in column i.
I have tried =AVERAGE(i2:i18) and it doesn't work.
I have also tries Ctrl/Shift enter as an array, it didn't work.
I tries to format cells as time and number, it didn't work!
Sum Of Lap Times In Order To Give Race Time At Any Lap
Apr 13, 2009
=C4+(0.3*(C5-((C2-1)*C3)))
Where C4 is 'Qualifying time', C5 is 'Starting fuel', C2 is 'Lap number' and C3 is 'Fuel consumption'. I also plan to make the 0.3 a changeable variable.
I'm not fussed as to whether or not this is a realistic function that would work in a real race, it's only hypothetical. However I would like to have a function that would give me the over all race time at any given lap, not just the lap time for it.
Subtracting Time (finding The Difference Between Times)
Dec 8, 2009I am having trouble finding the difference between times. I have two cells, A1, A2. Times will be placed in there each day. A1 will have the first time and A2 will have a later time that day. i.e. A1 12:25AM, A2 2:45AM. A3 would have the formula. In this case I am looking for an answer of 2:00 (2hrs).
My second issue will be times when I have A1 11:20pm and A2 1:20am. I can't seem to get it to work.
Pull Out The Sample Date And Time 20 Times
Dec 3, 2009I have a file that samples performance on a cpu. The output shows the sampling date and time in column A. This column changes depending on how long I run the file. No matter how long the column, I only want to pull out the sample date and time 20 times. So if I had data in column A with 300 rows, I want to divide 300 by 20 and pull those 20 numbers and put them in column B in chronological order. Same thing if I had 4000 rows in column A, I only want 20 samples.
View 5 Replies View RelatedConverting Time: Subtract Two Times To Get The Difference
Dec 14, 2008I'm trying to subtract two times to get the difference. Entries are in military format (1615) and VBA converts the time to 16:15. My problem is that when a time is entered between 0001 and 0059 (i.e. 0015), the VBA converts the time to :15. My formula does not recognize this, but does recognize 0:15 (entered without VBA). The cell is custom formatted as h:mm. I've tried several other formats including [h]:mm but can't get any to work. How can I get a formula to recognize it?
=IF(U12<T12,(U12+1)-T12,U12-T12)
where U12 is :15 and T12 is 23:00
Time Sheet :: Start / End And Difference Between Two Times
Apr 30, 2009I am trying to create a time sheet where there will be a start time - end time - number of hours (difference between the 2) - pay rate - total pay, but am getting strange results!
View 9 Replies View RelatedCSV Import Showing Times As Date & Time
Jul 17, 2007I am trying to import a .csv file with several fields that are timestamps. I get the file in Excel, and do Format, Cell, date as mm/dd/yyyy hh:mm.
My results come back as 1/0/1900 12:37:22 AM
My raw .csv field looks like 37:22.4
how I lost my date? I did check my system clock just in case, and it appears to be accurate.
Time Difference Formula Where Both Times In 1 Cell
Aug 14, 2007I need some IF formula I believe that will yield an answer between 1 - 5. I'm not swavey enough with these things to figure this one out... trust me I tried and it keeps getting more confusing for me.
If the time worked is between certain time criteria then it would equal 1 - 5 depending on the time.
Example: If I work between the hours of 5am and 1pm then I would be in the Open/Mid range and would need to equal 2. If I only worked a few hours and my hours fell only between the Mid range then it would equal 3.
Then based on that... It would automatically fill in on the deployment charts... My name would show up on the Open and Mid Deployments under the task chosen for me to do that day.
I've attached a small sample of what I am looking for to kind of help show what I need. The highlighted areas are the areas I'm not sure how to do.
Formula To Work Out A Variance Between Two Times (subtracting Time)
Apr 8, 2007formula to work out a variance between two times
Using the 24hr time format in cell a1 i have a start time of 10:43 and in cell b1
i have an estimated time i think a job should take in this case 30 minutes and in cell c1 i have the actual time that job was finished in this case 11:07 and in cell d1 i have a variance between the two times which in this case would be saving me 6 minutes
Calculate If Time Value In Cell Is Between Times Located In Two Other Cells
Feb 7, 2008I'm trying to calculate whether a time value located in a cell is between the times in two other cells. Here is what I tried:
=IF((AND($A62>=C$55,$A62
Total/SUM Various Times: Calculate Various Lengths Of Time Within A Column
Nov 14, 2008Need a ormula that will calculate various lengths of time within a column.
For example: I would like to be able to add
02:43 (2 minutes 43 seconds) plus
01:10 (1 minute 10 seconds) plus
05:15 (5 minutes and 15 seconds)
..and accurately arrive at the sum of
09:08 (9 minutes 8 seconds)
Currently, whenever I input the value of 02:43- and assign the value of 'TIME'.. it reads it as 14:23 (clock time..not length of time.) I will only be using data that follows the format of mm:ss (minutes:seconds).
Calculate Total Time Worked. Decimal Times
Aug 15, 2007I need to create a formula to calculate monthly hours worked (144.20) by hourly rate (£14.25). So far everything ive tried has given me awrong answer. I cant seem to make the total right. From what ive come up with (Not good) the total accepts the hours-just not the minutes.
View 8 Replies View RelatedJoin 2 Times In Cell & Retain Time Format
Aug 23, 2007I'm usually able to find my answer but I couldn't find anything to match what I need. Anyway... this is either really simple or impossible to do. I have two cells which have times in each. Say A1 has 5:00 PM and A2 has 10:00 PM. I'm just trying to make it so one cell will say:
From 5:00 PM to 10:00 PM... So I tried this ="From " & A1 & " to " & A2
But as I'm sure you already know that yields this result:
From 0.708333333333335 to 0.916666666666668
Count Occurrences Of Time Stamp Between Two Times From DateTime Column
Jun 18, 2014Been working on this issue for the last couple of days with no luck. I have a column of data that is a data and time stamp, for any date or time like below. This is an ever growing list as users continue to populate the data.
13/04/2014 20:00
28/04/2014 17:30
09/04/2014 13:30
09/04/2014 14:00
03/05/2014 7:30
03/04/2014 11:10
On a separate sheet I have a list of times by 15 minute increments starting at midnight until 11:59PM like below.
12:00:00 AM
12:15:00 AM
12:30:00 AM
12:45:00 AM
I'm trying to count how often a time stamp occurred between two 15 minute increments. ventually I'll be plotting this data on a graph to show where most occurrences happen.
Calculating Total Time For Individual With Multiple Start / End Times
Feb 12, 2014I am trying to come up with a formula that calculates total time someone has worked in a day. The scenario is an individual will work at a home and start working with an individual. Their start/end times look like this in a pivot:
Min Start Max Start Min End Max End
Location A+Counselor A 8:56 AM4:01 PM 1:11 PM 7:00 PM
Location A+Counselor B 12:00 AM 8:00 PM 6:00 AM 11:59 PM
Location B:Counselor C 7:00 AM 12:00 PM 2:00 PM 4:00 PM
Location C+Counselor D 8:00 AM 8:00 AM 4:00 PM 4:00 PM
Some people work split shifts while others work a straight shift. The formula I created was this:
=IF(OR(B9=C9,E9=D9,D9=C9),E9-B9,IF(D9>C9,((E9-D9)+(C9-B9)),IF(C9>D9,((D9-B9)+E9-C9),"New Formula Needed")))*24
(I use a pivot table to show max min for start and end times)
This works great except for the individuals that have multiple punches during the same time frame. The one scenario I am having trouble solving for is when someone punches in more than once during their shift displaying. This occurs when a counselor starts a shift working with one person but then adds another person mid shift. An example of this could be:
Location A+Counselor E Min Start Max Start Min End Max End
Consumer 1 1:00 PM 1:00 PM 8:30 PM 8:30 PM Total Time: 7.5
Consumer 2 12:00 PM 12:00 PM 2:35 PM 2:35 Pm Total Time: 2.6
Pivot says that they worked a total of 10.1 because it is grabbing the max and mins and calculating. The actual total time worked is 8.5 hours in reality.
The raw data comes in like so:
Location Counselor Consumer Start Time End Time
A A A 1:00 PM 8:30 PM
A A B 12:00 PM 2:35 PM
A A C 12:00 PM 5:00 PM
Is this solvable with a formula?
Formula To Count Number Of Times A Occurs Between Time Periods
Nov 30, 2013I am attempting to create a formula that will count the number of times, lets say letter A, occurs in column E. However, the tricky part that I have been confused on is that I only want to count how many times A occurs between each hour of the day. I need to count number of times "A" occurs between each hour of the day for the entire month.
My Worksheet looks as such: Column A contains the dates for the month of November, Column B contains times that random instances occur, Column C is not important, Column E contains a Letter A-N that pertains to what occurred at a time in column B. SO, Column B and column E coordinate with each other.
Here is an example. Column A - Cell A1 - 11/01/2013 , A2 - 11/02/2013, A3 - 11/03/2013.
Column B - Cell B1 - 12:01 AM , Cell B2 - 14:03 , Cell B3 - 15:23
Column C - Cell E1 - A , Cell E2 - A, Cell E3 - B
So I would like Column F to display that between 12:00 - 12:59 Am there was X number of times the letter A occurred throughout the entire month.
Count IF And IF Then Subtract Two Times In 24 Hr Format To Recieve Time On Task
Jul 9, 2008I get a spreadsheet downloaded to excel with a variable of 15 names.
I want to create a formula that if the name Cleardale appears to take the time responding in cell BD and subtract it from the time available in cell AV so that I have the time on task and then to add up all those times in a total time on task for all cleardale listings for that day. The times are listed in the 24 hour format. I keep getting errors. Can anyone help me out on this one? The range of the cells is from AV7 to AV500 for available time and BD7 to BD500 for alert time and the range of the names is cell f7 to f500.
Produce A Report That Details Elapsed Time Between Two Dates And Times
Jun 18, 2009I must produce a report that details elapsed time between two dates and times.
The duration can span a number of days, I need to report just the elapsed working time, I can calculate the days with "NETWORKDAYS" but how can I calculate only the elapsed working time 08:00 to 17:00?
Difference Between Dates & Times In Business Days With Time Constraints
Aug 16, 2009I need to create a spreadsheet that will calculate the difference between two dates and show the result in days. The complicated part is that weekends (Sat and Sun) need to be ignored and any time after 4:30 pm needs to be treated as the next business day. I have been trying to look at similar questions in forum and use the WORKDAYS function with little success.
Example:
A1- 14/08/09 4:40 p.m.
B1- 17/08/09 9:10 a.m.
I need the answer (B1-A1) to show up as 0. But if the time in A1 was changed to 4:20 p.m. than the answer should be 1 day.
Function To Subtract 2 Decimal Times & Return A True Time
Dec 4, 2007I have created a userdefined function. the Idea is for the user to calculate the difference in hours and minutes. The input would be like budtime = 30 , realtime = 1.25 the answer I would like to have is 28:45 (28hours and 45 mins). Im aware that I can format the cell manually with [h]:mm but I'd like the function to do it.
I have written this:
Function RT(BudTime, RealTime)
RT = Format(((CDec(BudTime) - CDec(RealTime) / 24)), "[h]:mm")
End Function
Calculating Lead Time Between Two Dates / Times - Excluding Holidays And Weekend
Apr 18, 2013Calculating Lead time (in hours) between two dates/times, excluding holidays and weekend
Start Time
End Time
Lead Time
12/26/2012 15:50
1/2/2013 12:38:00
??????????
Formula To Calculate Speed Knowing Distance, Destination Time And Checkpoint Times
Dec 2, 2008On my spreadsheet i have a bunch of variables:
A1 = Arrival time at Checkpoint 1 - 5:53:08
A2 = Time to destination from Checkpoint 1 - 1:10:18
B1 = Arrival time at Checkpoint 2 - 6:00:56
B2 = Time to destination from Checkpoint - 1:02:30
C1 = Total distance from Start - 2.83
C2 = Arrival Time at Destination - =SUM(A1,A2)
D1 = Speed determined from the other variables
D1 is SUPPOSED to equal 25.00
It also is where I am stumped!!
Not only can I not figure out the math but also how to format the function to get the right answer.
ps: Arrival Time at Destination is only included in case it would be useful to find the answer!
Pull Date & Times Into Seperate Cells From Date & Time Cell
Apr 2, 2008DONNAS [Single cell, 1st row] 09/08/2003 15:34 [Single cell ( date and time combined) 2nd row]. Do you know of any way that I can move the name, date and time from the above cells to three separate columns on the same row?
View 4 Replies View RelatedSummarizing Times For Specific Items Within Specific Time-frame
Mar 26, 2014I got Excel for Mac 2011 installed. I have a table called 'Raw" that holds data from the beginning until the end of 2013 (in total ~7000 rows). I have columns for Category, Start and End time, and time period in Hours, Minutes, and Seconds:
Code:
A
B
C
D
E
F
Category
Start
End
Hours
Minutes
Seconds
Transportation
2013/01/01 01:00:00
2013/01/01 01:15:00
0:15:00
15:00
900
[Code] ...........
I'm trying to get an overview of how much time I've spent in January on Transportation. I would need to look at the Category entries for Transportation, then only use the ones which have the Start set to 2013/01, and then take the Hours/Minutes/Seconds, and summarise it in a new table called 'Data':
Code:
A
B
C
D
E
F
Month
Category
Occurrence
Hours
Minutes
Seconds
2013/01
Transportation
48
[Code] .......
I have figured out a way to count the occurrences for Transportation for January:
=COUNTIFS(Raw!B:B,">="&"2013/01/01 00:00:00"+0,Raw!B:B,"
Time (clock) Times A Number= Very High Number?
Apr 2, 2009I have time start and time end and the difference between the two times. In a third column I have profit and want to calculate the profit per hour. When I divide the profit with the time spent I get a very very high number. If I for instance type in 1 hour of work and profit 100, then I get profit per hour 2400. (profit/hours spent)
On a side note I am trying to get the numbers as 24 hours and not use am or pm and in the spread sheet I get these numbers but in the box at the top where you see the formulas etc. it shows as am and pm. I have uploaded an example.