I want to ask you in this kind of formula: =IF($B11=$B$51;$E11+$C$51;IF($B11=$B$52;$E11+$C$52;IF($B11=$B$53;$E11+$C$53;IF($B11=$B$54;$E11+$C$54 ;IF($B11=$B$55;$E11+$C$55;IF($B11=$B$56;$E11+$C$56;IF($B11=$B$57;$E11+$C$57;IF($B11=$B$58;$E11+$C$58 ;0))))))))
is 8 IFs the most I can use? And if yes, is there a similar formula to use so that I can use 12 variables and all the results to be in a single column?
I am using excel as a scheduling program. The sheet has days of the month across the top, and staff names down the column. We have 5 shifts D,A,B,C,N. I am using the following formula to display if shifts have been scheduled for the column
if(countifB10:N23,"N")=1,"X","N") i.e for the night shift. I then use conditional formatting to change the cell to green if the night shift has been scheduled, or red if it has not.
I would like to have the results of all 5 formulas display in a single cell, to save Real Estate, then have the cell go green when all shifts have been scheduled for the day (column).
Is this even possible?
Is it posible to do 3 seperate calculations in a single cell and desplay those results? For example in a single cell: A1+A2 | A3+A4 | A5+A6|
Where:
A1 = 1
A2 = 2
A3 = 3
A4 = 4
A5 = 5
A6 = 6
Results Display: 3,7,11.
I have multiple worksheets with part numbers and prices for different computer parts. On each worksheet I have multiple sets of part numbers and prices but I only need one the information from specific part from each worksheet. Luckily, the part number I need is also the name of whatever worksheet contains it. I want to take the part numbers and prices from the parts I need and put them in one master sheet called "PartsNumbersCombined". Currently I haven't even attempted to format the data in PartsNumbersCombined, I am just trying to actually pick up and move the correct data. Here is my code:
Sub harvest()
ShtCount = ActiveWorkbook.Sheets.Count
For i = 2 To ShtCount
[Code].....
The part numbers are in column A and the prices are one row down in column C. I feel like I am close but I can not get anything pasted on my master sheet.
I have attached a copy of what I am trying to do. I've been researching vlookup for a while and everything I try doesn't seem to work. I'm also fairly new to Excel, so most of this is my first time trying these formulas.
In the attached test.xls file, I have two sheets created. The first is "Responsibility," and the second is "List." The data in "List" is what I am trying to pull from. As you can see, the people's names are listed more than once as the list goes down. On the "Responsibility" page I have each person's name one time. In the "Extinguisher" column, I'm wanting it to list every number that is found next to the person's name on the "List" sheet. For example:
Column B2 on the "Responsibility" sheet should read as follows:
1,2,3,17,24
Here is the formula I have in these cells:
=VLOOKUP($A2,List!$A$3:$C$38,3,TRUE)
I have a macro which scans column "AV" in Sheet1 and if a particular value is found it will copy certain cells from that row and paste them into Sheet2 on Row 10 starting with column "E".
With the current code I only paste a single instance, if the value is found more than once I only have the last one pasted. How can I best set this up so it will paste ALL found value results within Row 10?
The four copied results do not have to be in separate cells, it is actually best if the cells are combined. On Sheet2, cells E10-H10 can also be setup to have the data pasted across all four cells and that way Row Height AutoFit would take care of expanding the row's height to accommodate the possibly of having four or five sets of results being combined together and pasted into E10.
Rather than the typical result appearing as:
[TABLE]______E___F___G___H
10__1223 122 2222 2222
11__343 565 4554 5990
12__9755 334 6787 6788[/TABLE]
It is better for me if the data appears like this:
[TABLE]_____E____F____G____H
____1223 122 2222 2222, 343
10__565 4554 5990, 9755 334
____6787 6788
[/TABLE]
Is this even possible using a macro? It is currently being done using a Word document but I am wanting to automate the process and try to handle all the data sorting within Excel, if possible.
Sub Number()
Dim colSearch As Range
Dim celVal As Range
Dim celRow As Range
With Sheets("Sheet1")
I've got an If statement in Excel which features several VLookups - I need the IF statement to return differing results to 2 different cells, is this possible?
In plain English, I'm looking for something like
If(Vlookup(A2, B2:D5, 4, False), C6="y" And D7="ok", "False")
Obviously this is a very crude example
I have a cell witch contains CSV I need too look up all the values off a master list an out put the vlookup results in 1 cell
Example:
( SHEET 1/Cell A1)
10,11,12
(SHEET 2/ look up list)
.A .B
110101
211102
312103
413104
514105
(SHEET 1)
I need the output to show the following in Cell B1
101,102,103
Use filter for 2 columns of a CSV file, column A and Column B for certain words. Say I apply a text filter: contains "word1" or contains "word2" to Column A. Then I get the results. After that, I remove the filter to Column A then apply the same filter to Column B. The thing is, I don't get the results in Column B, instead, I get the cells in Column A wherein Column B is filtered PHOTOS BELOW:
The data that I get for this filter are:
And Word1 you
Word2 is blank
Apply filter to Column B, get the cells filtered in Column A:
The data that get for this filter are from Column A (which are cells filtered from Column B filter)
And Word1 you
Is the blah
Word is all
The results should in a single Column for both filter:
I have more than 100 files that needs to filtered this way, is there any way I can do this automatically?
Here is what the file looks like:
The results I hope would be possible:
Automatically without having to open all the files and have the results of all of it in 1 single Excel file?
----or----
If the above is not possible, open each file and automatically apply the filter into a column in just 1 click and without having to type the same filter for each column.
I found a code to combine all CSV files into 1 Excel file, but half of my files has more than 500k rows and the Excel's limit for rows is around 1million+.
I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View Relatedi have two sheets, one to display results (Reults tab) & the other tab containing the data (Data tab)
what i am trying to do is some how create a search function and have a forumula which contains a LIKE function that looks up the data table
RANGE = Data!A2:K255
the search needs to lookup the primary column Data!B2:B255 ... if any results are found .. show them on the results tab.. and if multiple results are found, display those as well.. (in either instance, the whole row of information in respect to the results need to be dislayed and hopefully no duplicates are found .. eg, Data!A:K of a hit)
is there a formula that can achieve this? oh, the search is TEXT based and there should be no empty cells within the dataset
after some MASSIVE googling, i have stumbled accross this
B1 = Search box (txt field)
A6 (which will be a hidden column) contains =MATCH($B$1,Data!A2:A255,0). this formula provides the first instance of the result and provides the row number
A7 contains =MATCH($B$1,OFFSET(Data!$A$1,A6+1,0,8-(A6+1),1),0)+A6.
this is supposed to look for the next row number which contains a match and provide that row number
and througout my other columns, i have
B6=OFFSET(Data!$A$1,A6,1)
B7=OFFSET(Data!$A$1,A6,2)
B8=OFFSET(Data!$A$1,A6,3)
and so on
2 things i cannot recitify..
1, the match has to be EXACT ... unfortunately i cannot use exact .. needs to be LIKE .. eg, i cant use the search word "boat" as the range of data has "boats"
2, it comes up with multile .. irrelevent results.
I want a formula to do the following. Count all instances when column A contains S or A and column B = 1. The example below would equal 2 (ONES MEETING CRITERIA ARE IN BOLD).
Example
N 2
S 1
A 1
D 3
X 2
I'm trying to write a simple VBA code to loop through values in the range A14:A138 and based on the value (of a possible four values) in any row of that range, populate the adjacent column in the same row with a conditional result. For example if A14 = "Cat", then B14 = "I"; if instead A14 = "Dog", B14 = "II", etc. If there is no value in column A, the result should be blank (i.e. "").
I believe are in coding the destination range since I can get it to work for just one cell in B! Below is my code that is not working...
[Code].....
I'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I am making a weekly plan for machine inspection at the end of every column i need to sum how many machine will be inspected.
L= area
L1=10 ,) L1 has 10 machines ... this number can be change in the future that is why t is variable. for example:
L1=10, L2= 25, L3=20
week1
L1
L3
sum ?
I am creating a tool that is populating information off of another excel document and presenting the information in a different format then the data originally appears. Basically I am unsure how to create a formula, for example, in cell A1, that as I drag it down (A2, A3, etc) the column letter in the formula advances but the row number remains the same. In another words as the formula moves into cell A2, the "Sheet1!D3" changes to "Sheet1!E3", where as normally it would advance to "Sheet1!D4". I just started back up in excel, im sure this is way easier then I am making it seem but I have been unable to come up with a solution.
View 4 Replies View RelatedI have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).
Attaching sample a file with sample data to be converted.
It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.
I want this by coding or formula only. I dont want to use pivot table for this.
Expecting Result.jpg
Macro for a repetitive task. I have data in every 3rd column (max of 11 columns) that I want to extract and append the data in column A in sheet 2. The data contains some blank cells and I'd like to remove them also.
I've attached an example in this workbook : tractdata.xlsx
I'm looking for a way to sort dates from several columns into a new single column (perhaps multiple columns if the entry columns become too numerous). I've included an example. There are currently only 4 columns, but there may be as many as 20 in the future, each with 20 dates under each heading. Any blank cells would be eliminated. If I filled a blank with a new date, that date would be placed into the chronological column. So basically, this would take the date from several different categories and create a single calendar of events.
View 8 Replies View RelatedI have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?
View 3 Replies View Relatedi have data on number of employees in culomn A range from 1 to 10000. i need to generat four dummy variables in column B,C,D and E as the following
s=1 if number of employees 1-50 and zero otherwise
m=1 if number of employees 51-100 and zero otherwise
l=1 if number of employees 101-1000 and zero otherwise
xl=1 if number of employees 1001-10000 and zero otherwise
I have a datasheet with 6000+ entries. One column has lists of companies, of which there are around 300 and their are entered into this column multiple times. I organized and identified the largest ones but a work file of 6000 is making it a long process to find every single company listed, paste their name onto a separate table to analyses. Is there a formula to take all the different company names and arrange them in a list OR list them just once in a column next to it? I will have to do this again and the analysis of the companies is the most important.but I find I need to spend all evening steadily combing the haystack for needles!
View 4 Replies View RelatedA B C D
COL 0
COL 0 1
COL 0
COL 0 1
COL 0
EDM 0
I need to add the number of 0's in column B if Column A is COL and C OR D is 1. correct function yields 3 for this example. I've played with =sumproduct(if)) and =sumproduct(if(and))) etc... can't figure it out.
I have data in three columns. The first column contains the machine name (Robot 3, Robot 4, and Robot 5), the second column contains the paint color (1-20), and the third column contains the data that I need to sum. For example the data could be paint purges, the number of purges from each robot. Each row of data will contain a number of purges for each robot, for each color. The data is provided by day, so I will be summing the data weekly.
View 8 Replies View RelatedSplit From Copy Non Null Cells In Column To Another. I'm trying to copy some of the results. How do you combine two variables with text into one cell. For example i want range("a1") = var1"."var2 so it would display var1.var2 if var1 = var1 and var2=var2
View 5 Replies View RelatedI recorded a macro to perform a graphing operation which will be used in a For-Next Loop which will run eight times. I need to modify the “ range” portion of one of the recorded lines to allow the graphing data to be dependent on variables I have set up as integers. See the applicable part of the recorded code below.
Dim firstrowno As Integer
Dim ltcol As Integer
Dim lastrowno As Integer
Dim rtcol As Integer
‘code which sets the values of the above variables Is Not shown
ActiveChart.SetSourceData Source:= Sheets("PLOTS").Range("AN27:AQ33"), PlotBy _
:=xlColumns
How do I replace/modify the ("AN27:AQ33") in the code above using the variable integers; firstrowno, ltcol, lastrowno and rtcol ?
I have a file that I need to do a text to column separated by comma and then transpose results to a single column. See exaple below
File
AreaZone
0886518
1801315
1801413
1801524, 25
1804214, 16, 18
Results:
AreaZone
0886518
1801315
1801413
1801524
1801525
1804214
1804216
1804218
I have a table which looks like this:
Name 1 IDNumber Name 2 Name 3 Column 5
Tom20148 John Malmo
Tom20148 Will Malmo
Bob20206 Will Malmo
Tom20206 Will Paris
Bob20206 Rob Rotterdam
Bob20207 John Rotterdam
Ray20207 John Paris
Tom20208 John Malmo
Ray20208 Rob London
Ray20209 Rob Paris
Bob20209 Will Malmo
Is it possible to have excel go through this list and assign each row a number in column 5 based on the names and the IDNumber? Basically, I would want each entry that is identical in name 1, 2 and 3 to be assigned numbers 1, 2, 3, 4, 5 etc based on their IDNumber. So Tom/John/Malmo with the IDNumber 20148 would get the number 1 in column 5, while the next match (Tom/John/Malmo/20208) would get the number 2 in column 5. For each different match of Name 1,2 and 3, I would want the count in column 5 to start at 1. So Bob/Will/Malmo/ 20206 would get number 1, Bob/Will/Malmo/20209 number 2 etc.