If A Specific Cell Changes Then (do Something)
Oct 25, 2009
I would like to make a code that does the following:
If a specific cell ("N47") changes it's value (not just has a value or a value over or under a specific amount. It needs to effect the dependent cell only when it changes it's value)
Then
Cell("K40") = Now()
"N47" is never typed on (so I can't use interesect) it is a formula (sum of D2:D30). It derives it's value from the other cells.
"K40" is also never clicked on. I just want it to show the date and time that "N47" changed it's value.
View 7 Replies
ADVERTISEMENT
Jan 20, 2009
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
View 3 Replies
View Related
Apr 16, 2014
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
View 2 Replies
View Related
Nov 7, 2008
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
View 9 Replies
View Related
Apr 4, 2013
Is there a way to format cells to where - when you type in a certain person's first name, it will insert something entirely different?
This has seemed to have happened on a computer at work.
In Excel, when I type in "Martha" then tab, or otherwise leave that cell, Martha changes to "Cool"
If I type in anyone elses name - it stays that name. But if I type in "Martha" .. it changes to "Cool" with the bullet and the word Cool.
View 6 Replies
View Related
Jul 1, 2014
Looking to have a macro call a subroutine every time it finds a cell meeting specific criteria.
Code in plain english would look like this:
For EACH cell in range A1:BZ500 meeting the following criteria:
Cell value is a date
AND
Cell's date is at least a week or more in the future
AND
Cell background (Fill) = RGB color code: (R:191 G:191 B:191)
DO the following:
Call repeatingsub
View 11 Replies
View Related
Sep 14, 2008
I'm trying to search through multiple worksheets (that are closed) to see if a value in cell B12 (of every worksheet) matches a value in a seperate worksheet (which is in a seperate workbook)
View 14 Replies
View Related
Aug 14, 2009
let say in cell A6 i have a list
SnG
Cash
MTT
I can pick one of these. If i pick Cash then i want a specific cell to run a specific formula. depending on the item chosen.
So in cell A6 is the list.
in cell B6 an amount will be place and in C6 another amount will be place. the number for c6 will range from a -number to a +number.
But D6 looks to see if B6 meet the requirements for MTT, SnG or Cash depending on which item was selected from the list. and uses the formula below with $c$3 changing from to either $D$3 or $F$3 and comparing the values for the chosen item. the formula changes would look this
=IF(ISBLANK(C6),IF(B6>$C$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$D$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
=IF(ISBLANK(C6),IF(B6>$F$3,"Do Not Play","PLAY"),IF(C6<B6, "Lost","Win"))
View 12 Replies
View Related
Aug 5, 2013
I'm trying to find vehicle make and model in a cell containing a lot of text and then display that in the formula cell. For example if A1 is a paragraph that contains somewhere within it "Ford" & "Ranger". I want B1 to display "Ford" and C1 to display "Ranger". I have a list of vehicles makes (column A) and models (column B) on a seperate sheet.
View 2 Replies
View Related
Mar 3, 2007
I am working on a system where the system is having "australia time". Now, I want a worksheet where it should reflect the India Time after pressing a specific key in a specific cell.
View 3 Replies
View Related
Dec 21, 2013
I paste new data into a sheet of a monthly report I prepare. For this sheet, the # of data rows change (and is unpredictable) every month. I need the value inside a specific cell that dynamcially moves up and down based on the # of rows for that month (because it's below the rows of data).
So I made a formula to identify the exact cell # every month.
Example:
This month the exact cell is F255 in the "Refi" sheet.
So my formula in the "Summary" sheet cell A1 first finds the cell row # only (255) and since it's always column F, in B1 I have
VB:
="F" & (A1)
This outputs "F255" in B1, successfully identifying the target cell.
Now how do I write a formula in C1 to grab the value from whatever cell is named in B1. (For this month, the value in cell F255 from the "Refi" sheet)
View 7 Replies
View Related
Jul 2, 2014
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
View 5 Replies
View Related
Jul 10, 2006
I have 6 Headings in excel named...
"A" in cell A1, B in B1, "C" in C1, "D" in D1, "E" in E1 and "F" in F1.
There are two projects.
Project 1 has phase A, D & F and Project 2 has phase A, B, C, D & E.
My Specification follows...
1). Take Prject 1 - Which starts from A...in cell A2 I will keyin "A". When the phase comes to an end I will key in the end date of the phase. As soon as I key in the end date in cell A2 Letter D should automatically appear in the cell D2 and when Phase D comes to an end I will key in the end date in Cell D2 which should automatically keyin F in the cell F2. and is the same case for Project 2.
View 3 Replies
View Related
Jun 14, 2014
What I'm trying to do is, create a formula that works like vlookup, except I want to return the value of the cell that is a specified number of cells below the looked-up data in a single column array. So, let's say cell A1 reads "Bacon". In B1, I'd like to put a formula which searches the array for the cell that contains "Bacon" and then returns the value of the cell underneath, let's say the value is "Eggs". Then in C1, I'd like to put another formula which also looks up "Bacon" in the array, then returns the value of the cell that is down two cells from the cell that contains "Bacon", let's say the value is "Milk". And then in D1, a formula that returns the value 3 cells below "Bacon", and so on. All the values here will be text, and not sorted in any specific order. I'll be using Excel 2010.
Please take a look at the attached sheet if it clarifies things.
View 3 Replies
View Related
Nov 20, 2011
In my excel workbook, I have a customer table and invoice sheet among many others.
As part of my system, there is functionality to grant new customers with a discount on the first purchase. Within my customer table, the last two columns are "Number of Purchases" and "Customer Type" (either single/multiple depending on no. of purchases), which are then used to determine whether the discount is valid or not on the invoice.
Once an invoice has been created, archived and refreshed with the customer selected (via a Customer ID), I would like some code to auto increment the number of purchases on the Customer table for that specific customer to +1.
For example, customer called Bob (Bob-1);
Number of purchases = 1
Customer Type = Single
Discount = Yes
Invoice then created for Bob (using Bob-1 as the unique value), sent off and refreshed. New figures should be:
Number of purchases = 2
Customer Type = Multiple (can be achieved by using IF statement on No. of purchases)
Discount = No
View 1 Replies
View Related
Nov 12, 2013
I would like to know how to use a VBA code to insert today's date into a specific cell (B9) when any cell in column B (B2:B8) has changed.
View 3 Replies
View Related
Mar 7, 2014
I'm trying to copy data from one excel sheet to another excel sheet. However, the data to be copied is dependent on the 'client name'.
To explain this further, in the first list I have a detailed report on our clients and the services provided to every employee of that company/client.
However, the sheet two only needs the names of the employees that belong to a specific client.
This can be done manually by setting a fliter on the name of the client/company, but I need to be automated. To ensure only that specific company/client company's employee name is copied.
View 2 Replies
View Related
Jun 6, 2014
I've done the following:
Sub BrownBH()
If Range("Brown!B4:B31") = X Then
Range("C4").Value = [#A]
Else
Range("C4").Value = NT
End If
End Sub
However, this doesn't even work.
When somebody enters an X in a specific cell on one worksheet, it's supposed to change the value to A of a specific cell in a different worksheet. Sounds simple enough...but...
View 5 Replies
View Related
Apr 22, 2014
I need to change the color of a specific cell when conditions are met in a different cell and it seems like it may be beyond the scope of simply applying conditional formatting. What vba code would look like in proper syntax to make the following statement true. IF cell value Q4 is >=cell value S4 AND cell value R4 is <100 Then cell Q4 turns red and IF cell value Q4 is >= cell value S4 AND cell value R4 =100 then cell Q4 turns green. it may also be useful to know that the "cell values" in this example will be dates and not straight values. this may be possible to do using conditional formatting, but i cannot find a formula that works.
View 2 Replies
View Related
Feb 17, 2014
Can I get a formula for the below specification.
if a cell contains character A THEN multiply by cell B * 0.02,if a cell contains character B THEN multiply by cell B * 0.05,if a cell contains character C THEN multiply by cell B * 0.010
View 1 Replies
View Related
Oct 29, 2008
I am trying to create a macro that will allow a user to click a button, enter a text string that will be an email address into a field and have it added to the first empty row in column A or column C on sheet 1. I have not been able to record this with the macro recorder. The input box will be in cell E9 on sheet1.
View 7 Replies
View Related
May 16, 2009
This is probably really easy but I don't know what I'm doing wrong.
View 2 Replies
View Related
Dec 12, 2012
I want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
View 4 Replies
View Related
Jul 4, 2013
I have a problem regarding highlighting a specific cell, when i entered a specific date in another cell
Let me explain
If there is a Name, joining date, termination date/resignation date in cell A1 A2 & A3 respectively.
If the name is John, Joining date = 01/01/2012, Resignation Date 06/06/13
I need a formula which highlights the cell A2 plus all those cells which have the same date when i entered a date (i.e 01/01/2012) in another cell.
View 2 Replies
View Related
Oct 22, 2012
I'm trying to find a way to display the latest stage that my processes are in, in a specific cell. Looking at the attachment, basically I need to display in cell E2 that my "Process 01" is in "STAGE AB" (because that is the latest stage populated with the achievement date). So similarly, for row 3, it should state "STAGE L".
View 3 Replies
View Related
Apr 3, 2008
I am creating a spreadsheet that when I type the product series in cell A1, it will automatically know to enter the corresponding catalog # into cell B1. I will be doing this for hundreds of product series.
For Example:
If I type AEP into cell A1, the worksheet will automatically enter #123 into cell B1,
If I type DEB into cell A2, the worksheet will automatically enter #458 into cell B2,
and so on...
I understand that I will have to create a master list with what series goes with each catalog #, but I am not to sure where to go from there?
View 14 Replies
View Related
Sep 28, 2011
I am trying to date stamp a cell when another cell has been changed from a drop down selection list. For instance: If cell A1 is changed, time stamp B1. I have tried both the following codes and they both work for 1 column.
"Private Sub Worksheet_Change(ByVal target As Range)
If target.column = 1 Then Cells(target.Row, 2) = Now()
End Sub"
[Code]....
The problem is that I want to time stamp cells in columns FHJLN, when the column to the left has been modified (EGIKM). So I basically want to repeat the time stamp code for multiple columns. I have tried messing around and can get not more than 2 columns to work at a time.
View 3 Replies
View Related
Jan 14, 2014
[URL]
All I need to get it working is a formula to look up a specific cell in every sheet, if the cell returns a specific value it will return the names of all the sheets. Heres what I have so far:
=IF(COUNTIF('Pupil A'!D5, "ICT"),'Pupil A'!C1, FALSE)
'Pupil A' could be all the sheets in the workbook and hopefully that will return the names of all those sheets. I made a new question as this seems to be more specific, I will of course update my old question when I get it working.
View 1 Replies
View Related
Feb 13, 2009
I'm trying to force Excel to open to a specific cell (say A1) on Sheet 1 each time the workbook is open. Sheet 1 is named Start.
View 12 Replies
View Related
Jul 31, 2009
In the attached document i need to work out the following solution for a formula but im baffeled! In the completed column i need to show 'ongoing' if there are any 0's in the 101 - 104 columns and 'completed' otherwise.
View 3 Replies
View Related
