i just want to ask if its possible to insert fomula in empty row..
for example i have 22 columns.. 1-3 columns is data and col 4 is value the formula start in col 5-22 which is based on col 4 if that column has a value and i have so many rows its possible to insert formula in col 5-22 automatically not one by one?
I have a sheet that I put a blank row before every change in column G,
Dim lr As Long, i As Long
lr = Range("G" & Rows.Count).End(xlUp).Row
For i = lr To 2 Step -1
If Range("G" & i).Value Range("G" & i - 1).Value Then
Rows(i).EntireRow.Insert Shift:=xlShiftDown
End If
Next i
and now I need formulas in columns B and I in those blank rows. I'm happy to roll it in to the above piece of code, or put it in after.
I don't think I can use LastRow to define my range and replace blanks with formula because of the blank rows. I would need more of a "LastRow with only one blank in between populated rows" if such a thing exists.
The formulas will be ="*"&H3&" DWG "&G3 for cell B2 and =I3 for cell I2.
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I've encountered another thing during my data analysis that I would like excel to do for me (less work, more fun ) I basically have a **** load of columns and rows, where different ppl are represented on different rows. Every person has an ID nr. between 1 and 279. My column A holds those ID numbers. I want excel to make a new empty row between every person. So if column A looks like
1
1
1
2
2
3
I want it to be
1
1
1
2
2
3
Is it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
I know it is easy but I can not get code to work. I need to insert row before every not empty cells in column A. This is what I have so far.
Code:
Sub proba()
Dim c As Range
Dim i As Long
[Code]....
Can VBA code that inserts between written rows a certain number of empty rows (and to be able to specify somewhere in the code the number of rows to be inserted)
View 9 Replies View RelatedI'm looking for a quick and easy way to insert a value in the first empty cell in a multi-column, multi-row range using VBA. I suppose I could loop through the range, but the table could grow to immense proportions and I don't want to slow everything down.
For example, the new value should be placed in cell C4. It doesn't matter whether the range is looped through the rows or columns, either will work just fine.
A
B
C
1
5
65
56
2
32
12
89
[code]...
I am processing an infinite set of data from a meteorological station here in Alaska which gives me half hourly data reading with a time stamp 00.00, 00.30, 01.00, 01.30, 02.00, 02.30 and so on.
I am using this formula to detect every time half hour reading is skipped (=IF(TEXT(MOD(B1936-B1934,1),"[M]")="30","","missing")) and it works pretty well.
Still I have to check and manually insert extra missing for every half hour missing but that's bearable.
This formula inserts a "missing" every time it finds a gap.
My question is: How can I insert a row above every cell with "missing"?
How do I do that? Here is also my excel sheet.
CR1000_Meteo_20131113_2_CLEANED.xls
I'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A
B
C
D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
I can use the MATCH function when i am in excel but i am having trouble getting it to work when i am trying to insert the formula using VBA.
Here is the code i have but it wont even compile........
I am looking to average a range of cells which won't always be the same size. How do I create a formula array that will omit empty cells in my formula.
View 9 Replies View RelatedIF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
I am learning how to create functions. All is going well, except when I auto fill for future input, the cells fill will all kinds of N/A or Null stuff etc.. I was trying to figure out how to do an IF statement like in my example below, that when the cell of reference is empty, keep it empty...but it is not working. take a look at it and tell me what I am doing wrong? I am using a grading system example...when a grade is put in, the corresponding letter grade fills, but when no grade value is entered, I want to keep the cells empty.
"=IF(H5="",""=IF(H5>89,"A",H5,IF(H5>79,"B",IF(H5>69,"C",IF(H5>59,"D","F")))))"
I want to count all the cells in a range that visibly contain no data, so either have no formula or are =""
I tried both of the following with no success
=COUNTIF(A1:A9,"""")
=COUNTIF(A1:A9,"""""")
I want to make the formula: x=SUM(A * e^(-b*d)), wherein A and b are parameters and d the distance.
I've just over 10.000 rows and 15 columns (B4 to P10013) with distances. For each column i give a formula =$S$2*EXP(-$R$2*B4) and extent that for all colums and rows, then I sum all the columns. This works fine, except for the fact that when there is an empty cell the outcome is wrong. Because I set for example A as 10. The answer for that cell is 10, because he sees an empty cell as 0, i guess.
So how do I skip these empty cells?
I have a chart with blank values in some cases. I have set up the chart to show those values as gaps, which relies on the blank cell being empty. However, my blank cells have a formula along the lines of: if (condition,value,"")
So the chart does not consider them blank, presumably either because the formula is in there, or because "" is not the same as blank. How can I make this cell appear blank for the purposes of the chart?
Its probably very simple question, but i can not work it out.
I am trying to design a simple worksheet so I can keep track of how much money my room mate has paid me and what she owes. She pays $142 a week rent plus $23 a month for internet.
Please open the attached workbook. You can see in E7 and 8 there is a red negative number. This is because my tenant hasn't paid me yet for those weeks (D7 & 8).
How can i get these cells to read $0 or leave the cell empty?
The reason why I need this to read $0 or nothing is because it is messing up my next calculation in D3 where it works out how much she has paid for our internet bill.
Thanking you in advance. And sorry if this is a really daft question. Its probably something really simple i have missed.
Im looking to add an update macro button so if A ""
the formula contained in say H2 gets dropped down until it hits were col "A" is blank.
I have a grade system where I need to obtain an "Average" of grade data within four cells. At time there may onlt be two cells with a value or three. Example: The cell cell cantain a value of 100 points with the totral of 400 point. AS we know the "Average" would be 100 points. But is only two cells cantained 100 point and the other two where empty then the "Average" come back as 50 points. Because I have 4 cells that requires a value input. So my question is how do I create a formula that will give the correct value for the "Average" of data that is placed in the cells. The values are calculated as a total from the grades entered. That total is in F14, F31, F48, F65 - Now if F14 has a value of 100, and F31 has a value of 100 then the "Average" should be 100, but it is not for the is calculating F48, and F65 as 4 values, so the return is 50. The situtation is that I need all the cells for in some cases data will be necessary, but I need the "average" to be calcalated for only the values entered.
Where is the Formula.
=IF(SUM(F14,F31,F48,F65)=0,0,AVERAGE(F14,F31,F48,F65)) - My brain says this is simple but no matter what I do it returns 50.
I have tried a number of different ones from my search of this forum but I'm getting an error. here is a sample of my spreadsheet.
I want it to give me the lowest number, I don't want it to look at the 0's or if the cell is blank.
Here is my formula and my error:
=SMALL(N196:N203,COUNTIF($N$196:$N$203,0)+1)
my error is #num!
I've also tried others including using the MIN function but either 0 is entered or the error above.
3402414
I have a spreadsheet that is pulled automatically from an access database.
The information that is pulled is invoices that have been paid for each of the temps working for our company.
Each month I have to give a figure per cost code on how much they are accruing so that they can see how much is still outstanding.
Right so what I am trying to do is have a macro take the temps charge rate then * 40 hours and place the amount into the empty cell.
As you will see in the attachement some of the cells are coloured. The purpose of the colouring is show that a invoice has been processed and paid for that week so no value is needed in that cell.
Then total all the cells at the end.
I think I understand what you were talking about now with the generation of the watchbill using the rand() and sort. You were trying to get me to get rid of the whole system I was using before and use only the rand and sort. I thought you were asking me to incorperate the rand sort thing into the randomization process I already had using offset etc. The whole thing works good now, however, because the column Ive designated for the roster names may or may not always be filled the formula sometimes refers to empty cells in that column thus producing 0s on the watchbill. I was thinking maybe (if its possible) having a formula to identify a 0 and if so skip to the next cell down. The formula would repeat until it found a name without a zero in it.
View 5 Replies View RelatedI am creating a fantasy football draft board using excel. To keep it short and sweet, each individual team (one per column) has a $200 budget to draft players. Each team must fill 14 roster positions (one per row), but here's the catch; you must spend at least $1 on all of the 14 players on your roster. So you have a maximum bid amount which is your remaining budget subtracted by $1 for every remaining spot you have left to fill.
I have already created a "remaining budget" field which subtracts each drafted player's inserted dollar amounts from the $200... easy. Beneath this, I'd like to create another cell per team that tells you your "maximum bid," which is essentially 200, -1 for every cell that remains blank. I have played around with the conditional IF formulas but cannot seem to have it account for multiple cells.
As a workaround, I have made columns hidden beneath the board which contain the conditional IF, ISBLANK fields which are -1 if true and 0 if false. Then creating the "remaining budget" field that subtracts these values from 200. This works, but it's not perfect, as when you have multiple players you still need to draft and you've exhausted your budget only saving $1 for each, it overstates your "maximum bid" by $1, or when you have $X left and you need to only fill one more spot, it ill tell you your "maximum bid" is $X-1.
I have a list of assessment scores for students with a matching grade in text form. I want to show the percentage of students that receive "Adv" and "Pro" grades out of the total number of students (cells with data). But I have extra cells in case students are added during the year. I need to have the formula ignore any empty cells and count all of the "Adv" + "Pro" grades divided by number of students with data. I would like to do this by including the extra cells in the formula so I don't need to amend the formula should students be added. This is the formula so far. Maybe there is a totally better way to write this formula.
=SUM(COUNTIF(C7:C60,"*"&{"Pro","Adv"}&"*"))/COUNTA(C7:C60)
The script works however I dont want the formulas to be entered into the cells that dont have any information in them because I am using them in a list box. To sum it up. So if sheet LA (Range A3:B98) is empty then dont copy the formula. If there is a data in this range then copy the formula. Here is the script that copies the formula's I just need to check sheet LA before it does this.
View 2 Replies View RelatedIs there a way to have the answer to a formula display nothing if one of the cells have nothing. Example cell A3= A1*A2 ... it will naturally show 0.00 but even if both A1 and A2 are completely blank. Is it possible for A3 to show nothing if A1 or A2 or both contain nothing. I still want it to show 0.00 but only if that’s what is in the other cells.
View 5 Replies View RelatedI have a formula when C15 is empty it shows -18 value. I need if the value is blank then show blank?
Code:
=IF((Data!C15-32)*5/9="","",(Data!C15-32)*5/9)
I would like to use the IF function so when cell B2 is empty, cell C2 will stay empty. the formula =MONTH(B2&C2) need to be used when cell B2 is not empty. this to convert text to number in column C
This is the result that I would like to achieve
A
B
C
D
E
1
MONTH IN TEXT
MONTH IN NUMBER
2
MAY
5
3
4
JUNE
6