I've encountered another thing during my data analysis that I would like excel to do for me (less work, more fun ) I basically have a **** load of columns and rows, where different ppl are represented on different rows. Every person has an ID nr. between 1 and 279. My column A holds those ID numbers. I want excel to make a new empty row between every person. So if column A looks like
1
1
1
2
2
3
I want it to be
1
1
1
2
2
3
i just want to ask if its possible to insert fomula in empty row..
for example i have 22 columns.. 1-3 columns is data and col 4 is value the formula start in col 5-22 which is based on col 4 if that column has a value and i have so many rows its possible to insert formula in col 5-22 automatically not one by one?
I know it is easy but I can not get code to work. I need to insert row before every not empty cells in column A. This is what I have so far.
Code:
Sub proba()
Dim c As Range
Dim i As Long
[Code]....
Can VBA code that inserts between written rows a certain number of empty rows (and to be able to specify somewhere in the code the number of rows to be inserted)
View 9 Replies View RelatedI have a sheet that I put a blank row before every change in column G,
Dim lr As Long, i As Long
lr = Range("G" & Rows.Count).End(xlUp).Row
For i = lr To 2 Step -1
If Range("G" & i).Value Range("G" & i - 1).Value Then
Rows(i).EntireRow.Insert Shift:=xlShiftDown
End If
Next i
and now I need formulas in columns B and I in those blank rows. I'm happy to roll it in to the above piece of code, or put it in after.
I don't think I can use LastRow to define my range and replace blanks with formula because of the blank rows. I would need more of a "LastRow with only one blank in between populated rows" if such a thing exists.
The formulas will be ="*"&H3&" DWG "&G3 for cell B2 and =I3 for cell I2.
I'm looking for a quick and easy way to insert a value in the first empty cell in a multi-column, multi-row range using VBA. I suppose I could loop through the range, but the table could grow to immense proportions and I don't want to slow everything down.
For example, the new value should be placed in cell C4. It doesn't matter whether the range is looped through the rows or columns, either will work just fine.
A
B
C
1
5
65
56
2
32
12
89
[code]...
I am processing an infinite set of data from a meteorological station here in Alaska which gives me half hourly data reading with a time stamp 00.00, 00.30, 01.00, 01.30, 02.00, 02.30 and so on.
I am using this formula to detect every time half hour reading is skipped (=IF(TEXT(MOD(B1936-B1934,1),"[M]")="30","","missing")) and it works pretty well.
Still I have to check and manually insert extra missing for every half hour missing but that's bearable.
This formula inserts a "missing" every time it finds a gap.
My question is: How can I insert a row above every cell with "missing"?
How do I do that? Here is also my excel sheet.
CR1000_Meteo_20131113_2_CLEANED.xls
I'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A
B
C
D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
Here find the excel file
My requirement
1) 4 values contains in each row based on the values from those cells the max value will display.
2) if more than 2 cells have empty,NR or NA text means the entire row has to delete.
3) if 2 or more that means 3 cells having values the empty cell,NR or NA cell will place value with the condition of macro that is 75% of other values which is maximum among them.
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is a Cell with a formula (like shown below) considered true, or is it empty?
=IF(Scorecard!$B$13,Scorecard!$AD$4,"")
If Scorecard!$B$13 was False...
Would a cell with the above formula be considered?
True or Empty?
If Scorecard!$B$13 was True...
A cell with the above formula would be True.
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedIs it possible to make a cell "really" blank/empty based on an If statement? For instance:
=if(a1>10,a1,"")
Has a value_if_false of "". But Excel interprets this a bit differently than a cell that never had anything typed into it.
So if you have a column full of this formula copied down, and hit <control+down arrow>, you will go straight to the bottom and skip over all rows. Whereas if you have a column with values and empty cells alternating and hit <control+down arrow>, you will only skip the empty cells and go to the next value. Excel treats the conditionally empty cells as if they have a value, when it comes to this type of navigation. This holds even if you copy and paste "Values" for the cells over the formulas.
Is there any way to tell Excel to make the cells truly empty?
I need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
I am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I have a master data sheet with four columns, A, B, C and D
Column A has the primary data and B,C,D has dependent data values;
So when I insert a new cell in Column A with cells Shift Down, I want mandatorily new cells to be inserted in the same row in col B, C and D as well so that data integrity is maintained;
I can use the MATCH function when i am in excel but i am having trouble getting it to work when i am trying to insert the formula using VBA.
Here is the code i have but it wont even compile........
IF cell(some cell) empty AND cell(Diferent cell) not empty then Put Formula in empty cell
Next (to go throught the cells because the range constantly changes with every new report)
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
When I look at the cell: wsEmpRec.Cells(10,50).Value in the VBA Watch window the value is Empty. I mean, that's the actual word that shows up. I'm trying to test if there is a value in the cell but when I use: if wsEmpRec.Cells(10,50).Value = "" then the condition is not being met. How can I test for an Empty cell as opposed to a cell that contains an empty string?
View 9 Replies View RelatedI have a recordset that I get from Access and dump it onto an Excel spreadsheet. Many cells look empty but when I run a macro that depends on if these cells are empty it considers them not to be empty. Does anyone know what Access is putting in these empty cells?
View 4 Replies View RelatedHow I can look up non empty cells as shown in the below tables by use of a formula (I guess shifting data to the left without any empty cells between the data)?
Data as shown in present worksheet.
A
B
C
D
[Code]....
I got 2 rows with dates sometimes in one of them a date is missing. Now I would like in collomn D a list that looks in both collumns and picks out the one that has a date
HTML A1B1C1D1E1
A2
A327-Sep27-Sep27-Sep
A427-Sep27-Sep27-Sep
A528-Sep28-Sep
A628-Sep28-Sep28-Sep
A728-Sep28-Sep
A828-Sep28-Sep28-Sep
A930-Sep30-Sep30-Sep
A1030-Sep30-Sep30-Sep
A1130-Sep30-Sep
I have some variables with numeric values. is there a way to test to see if they are empty and if not, then add them to the average and increase the denominator. i was thinking of something like below, but as you can see, the denominator is static at 2.
If PMm1 "" Then
z = ((x6Q1 * 3) - PMm1) / 2
End If
If PMm2 "" Then
z2 = ((x6Q1 * 3) - PMm2) / 2
End If
My code is as below... its failing with message "Else without If" but there is an If .. i've tried adding Ifs and putting in With and many variations but to no avail.
i'm . Column J is a number and Column I could be number or text but is formatted as text.
Sub testvalues()
Dim lastrow As Long
Dim r As Range
Dim Msg As String
Dim b
I tried to search the board before posting a new thread but could only find macro solutions to my problem. I'd really like to avoid macros if possible and maybe use offset function or some other functions.
So I'd like a formula in column C that looks for the word Total in Column A. If it sees that, then it sums up the values in coumn B from the line above where it sees the word total up until it sees a blank row. So for example, cell C7 sees "total" in A7 and sums(B2:B6). It starts at B6 because that is the line above row 7 where it sees "total". It ends at B2 because cell B1 is blank.
Column AColumn BColumn C12233154165656847Total20389361033118512Total154
I use macros to copy from one spreadsheet to another like this
Sheets("Sheet1").Select
Rows("1:1").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("Sheet2").Select
Range("A1").Select
ActiveSheet.Paste
I need to insert and where so that when I copy the data in sheet 1 again and paste into sheet 2 it does not overwrite the data already there. Basicly sheet 2 should hold 7 days worth of data copied from sheet one