Insert Empty Rows Code
Jun 26, 2007Can VBA code that inserts between written rows a certain number of empty rows (and to be able to specify somewhere in the code the number of rows to be inserted)
View 9 RepliesCan VBA code that inserts between written rows a certain number of empty rows (and to be able to specify somewhere in the code the number of rows to be inserted)
View 9 RepliesI am using the following block of code, which cycles through the data and first deletes any cell with "Legal:" in it, and then cycles through again and deletes any row where the cell is blank.
The problem is that within the data, there are some locations where there are two blank rows in a row. When the code runs through, it deletes the FIRST blank row only, not the second. I Need ALL blank rows within the data set to be deleted.
Code:
Sub ModifyNewData()
Dim r As Range, rAll As Range
Dim WS As Worksheet
Dim iLast As Integer
[Code] ........
Also, if there is a way to write looking for blank rows into the first block of code looking for "Legal:" that would be cool too.
If not, just deleting all the blank rows is good. Right now, I have to have the second block of code run twice to get rid of the remaining blank rows.
I am processing an infinite set of data from a meteorological station here in Alaska which gives me half hourly data reading with a time stamp 00.00, 00.30, 01.00, 01.30, 02.00, 02.30 and so on.
I am using this formula to detect every time half hour reading is skipped (=IF(TEXT(MOD(B1936-B1934,1),"[M]")="30","","missing")) and it works pretty well.
Still I have to check and manually insert extra missing for every half hour missing but that's bearable.
This formula inserts a "missing" every time it finds a gap.
My question is: How can I insert a row above every cell with "missing"?
How do I do that? Here is also my excel sheet.
CR1000_Meteo_20131113_2_CLEANED.xls
automatically hiding empty rows on my table... though the table has been referenced via string of formulas which I added up on my worksheet.. Some of the rows on my table are empty and I tried a VBA code on automatically deleting the rows but then I realized that if that certain 'referenced' string of that cell is not empty anymore, that would cause me much trouble.. so basically I need a code that would automatically hide the rows that displays a result of "" and unhides when it is not empty.
View 14 Replies View RelatedI need a code that I can run that will delete all rows that have nothing in at the bottom of the sheet. What I mean is I will be printing a file and because rows have been deleted that had data in a lot of sheets are being printed and wasted. So what I need is a before close code or something that will actually make the last row with data in the last row!
View 2 Replies View RelatedI have a database and at times I have empty rows. I am trying to write code that looks at the database (it may change daily) and deletes the rows that are empty. The code I've written does NOT work:
Sub emptyrows()
Dim emptyrows As Object
Set emptyrows = Cells(65536, 255)
If Rows = "" Then
Selection.Delete Shift:=xlUp
End If
End Sub
I am trying to run a macro that will hide rows when one cell is empty and another is not. Example: hide row when cell g is empty, but cell b is not. Or something to that effect. So far I've only used this code, but I would like to know how I can modify the code to fit the parameters I need:
Sub HideRows()
On Error Resume Next
With Range("B1:B300")
.EntireRow.Hidden = False
For i = 1 To .Rows.Count
If WorksheetFunction. Sum(.Rows(i)) = 0 Then
.Rows(i).EntireRow.Hidden = True
End If
Next i
End With
End Sub
The spreadsheet I am working in has $ which I need to total. The information, or rows, can vary from day to day so there is no static place to have a cell with an @sum. Management wants me to add a pretty line that says
'Total' in one cell and the $ next to it. I have about 30 sheets with columns to total. Yuck, takes forever.
How do all of you total if you don't know the last row? At the top?
I thought it might work to put an @Sum in the last row of the spreadsheet, in the column
I need to total, and having a VB code to delete empty rows. That would be automatic.
I have a requirement where I have to add a row with x columns using vba. this is the code I am using now
k = 17
prodetails = .GetFieldValue("Product Details")
sSeats = .GetFieldValue("Seats")
If isRecord Then
While isRecord
Sheets("Products").Rows(k).Insert Shift:=xlDown
Sheets("Products").Rows(k + 1).Insert Shift:=xlDown
Sheets("Products").Rows(k + 2).Insert Shift:=xlDown
ThisWorkbook.Sheets("Products"). Cells(k, Prod6Col) = prodetails
ThisWorkbook.Sheets("Products").Cells(k, Unit4Col) = sSeats
isRecord = .NextRecord()
Wend
End If
In this code I have declared Prod6Col and Unit4Col as constants. instead I need to use them as variables like in this modified code. However if i use this code, I get an object definition error.
k = 17
m = 20 (20th column)
l = 18 (18th column)
prodetails = .GetFieldValue("Product Details")
sSeats = .GetFieldValue("Seats")
If isRecord Then
While isRecord
The below code used to work for me perfectly but in the last couple days it's been acting up. The code is supposed to cut out 2 rows from sheet1 and insert it in order of column B in sheet2. Up until a few days ago the code was inserting the 2, cut, rows properly but now it inserts it at the top of the sheet.
Here is the workbook I'm working with TEST.xlsm
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
I am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedI need to write a macro which checks cells in one column and if the cell is empty it deletes the whole row (which contains the cell).
I tried this code but it doesn't delete all rows with empty cells:
I've encountered another thing during my data analysis that I would like excel to do for me (less work, more fun ) I basically have a **** load of columns and rows, where different ppl are represented on different rows. Every person has an ID nr. between 1 and 279. My column A holds those ID numbers. I want excel to make a new empty row between every person. So if column A looks like
1
1
1
2
2
3
I want it to be
1
1
1
2
2
3
i just want to ask if its possible to insert fomula in empty row..
for example i have 22 columns.. 1-3 columns is data and col 4 is value the formula start in col 5-22 which is based on col 4 if that column has a value and i have so many rows its possible to insert formula in col 5-22 automatically not one by one?
I know it is easy but I can not get code to work. I need to insert row before every not empty cells in column A. This is what I have so far.
Code:
Sub proba()
Dim c As Range
Dim i As Long
[Code]....
I have a sheet that I put a blank row before every change in column G,
Dim lr As Long, i As Long
lr = Range("G" & Rows.Count).End(xlUp).Row
For i = lr To 2 Step -1
If Range("G" & i).Value Range("G" & i - 1).Value Then
Rows(i).EntireRow.Insert Shift:=xlShiftDown
End If
Next i
and now I need formulas in columns B and I in those blank rows. I'm happy to roll it in to the above piece of code, or put it in after.
I don't think I can use LastRow to define my range and replace blanks with formula because of the blank rows. I would need more of a "LastRow with only one blank in between populated rows" if such a thing exists.
The formulas will be ="*"&H3&" DWG "&G3 for cell B2 and =I3 for cell I2.
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I'm looking for a quick and easy way to insert a value in the first empty cell in a multi-column, multi-row range using VBA. I suppose I could loop through the range, but the table could grow to immense proportions and I don't want to slow everything down.
For example, the new value should be placed in cell C4. It doesn't matter whether the range is looped through the rows or columns, either will work just fine.
A
B
C
1
5
65
56
2
32
12
89
[code]...
I'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A
B
C
D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
In my excel I'm copying rows upon specific criteria to another tab.
The question is how I can delete copied rows and update the original tab without empty rows? (N of rows is always changing)
I have a worksheet with 40 colums and 9200 rows. There are columns with empty data in the rows. Can I have a macro to copy data in the rows in Column E, F, I, J K and L to empty rows below?
View 3 Replies View RelatedThe best way to explain my problem is to look at the table below:
How it looks now: ApplePrice 1
Price 2
Price 3FruitDeliciousPearStore 1
Store 2FruitVery DeliciousHow I want it to look:ApplePrice 1FruitDeliciousApplePrice 2FruitDeliciousApplePrice 3FruitDeliciousPearStore 1FruitVery DeliciousPearStore 2FruitVery Delicious
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
I have a spread sheet with values in the area of A1:H834
In column H, I have number values from 1-7.
Essentially that number value means that the values in the row are duplicate.
So, for example, if H2 has a value of 4, that means that $A$2:$G$2, really should have an additional 3 rows underneath with the EXACT same data in each cell, however, the way the sheet was created, was to remove the duplicate values and just indicate in column H, the number value of how many duplicates $A$2:$G$2 really is.
I need to unpackage this and create what it was originally. What type of formula can I use, to look at the value in H2, and then insert underneath that number of rowes with the exact same data as A2:G2 and do the same for the remainder of the table all the way down to A834:G834
I'm a macro novice and have been trying to teach myself how to write the correct one for a task I need to do, but I cannot seem to get it right. Basically, I have bunch of data and for one of the variables, different values are separated by commas. What I want is to create a row copying the info below for each piece of data after the comma.
Sheet1
A
B
C
D
[Code].....
I suspect there is a fairly easy way to do this, but I cannot figure it out from searching the forums (or rather, I can't get it to work right).
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
I have a worksheet named mylist, that I delete, then recreate everytime I run a specific macro. However, I have code in this worksheet that I require, so is there a way for me to insert code to "insert code" on the "re-creation" of the worksheet?
View 9 Replies View Relatedi was currently gave this code. Sheets("Sheet1").Cells(Rows.Count, "A").End(xlUp)(2) = Me.TextBox2.Text Is there away this can modified to go to the next completly empty row in stead of just "A"? Like maybe A thru L or the entire row would be ok.
View 5 Replies View RelatedWhat would be some code to select the 1st empty row in a sheet. I need to select entire row. To be easy it could be first empty cell in A, but would like whole row selected.
View 3 Replies View Related