MATCH Formula
Nov 6, 2008
Basically i have one workbook, within which are 2 worksheets.
I'm having to describe it without a template (as aforementioned the site is having a problem at the moment).
In cell H18 of worksheet 1 I HAVE .........''Fixed asset posting FADep007441'' in cell J18 SAME worksheet i have the amount 26.62
I need to match the full column H (Worksheet 1 and values in column J) TO
those in column B4 OF WORKSHEET 2 AND MATCHING this to the EXACT VALUE in E4) .....BUT ANSWER TO BE looked up in (cell N18 of worksheet 1) and if exact the same value and if not the word '' NO''.
View 3 Replies
ADVERTISEMENT
Jan 21, 2014
See attached file, "Rate Sample Index-Match Formula".
I need a formula to return the value at the cross section of two (2) lookup values that match. This formula will be input into column D under, "RATE" on the 1st tab, "TEST FILE".
In the 1st tab, "TEST FILE" there are a series of columns as follows;
A = Service
B = From
C = To
D = Rate
In the 2nd tab, "RATES" there is a series of rates with drivers From (green) & To (blue)
The formula needs to do the following;
1. Lookup the "From" value in column B on tab, "TEST FILE" and match to column B2:B59 on tab, "RATES" both highlighted in green
2. Then Lookup the "To" value in column C on tab, "TEST FILE" and match to row C1:BH1 on tab, "RATES" both highlighted in blue
3. Then return the value at the cross section of the match "From" (point 1 above) & "To" (point 2 above) in range C2:BH59
For Example;
The rate From SYD To CBR = 0.33. I have highlighted this in yellow on both tabs to show where the formula needs to lookup the data to return the answer.
Additionally, if we were to add service as an additional lookup match how would this work?
View 3 Replies
View Related
Feb 5, 2014
In sheet 1, I have
Col A Col B
John Sedgwy - R
In sheet 2, I have the following names
Col A Col B
Peter Walker
John Sedgwicky
When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}
gave me an error but when I did an individual match to both John and Sedgw, it works.
View 4 Replies
View Related
Oct 6, 2009
I currently have a spreadsheet with two sheets. The first is my reporting sheet and the second is called Stores. I currently am using the following formula in the reporting sheet:
View 3 Replies
View Related
Jan 26, 2009
I have 2 spreadsheets. Both have a list of part numbers on. Beside each part number i want a formula that tells me if the part number is present in both spreadsheets so its says TRUE. If its not present then FALSE. I've tried using this command but it doesn't seem to work properly =ISNA(MATCH(B2,A:A,TRUE))
I've attached the 2 spreadsheets. Spreadsheet1 is where i need the forumula placed beside the part numbers so if its present in Spreadsheet2 as well it displays TRUE beside the part number in Spreadsheet1.
View 4 Replies
View Related
Jun 18, 2009
Current I am using two spreadsheets for similar press and am combining the two. What I need help with this time is currently in cell c9 the formula is =ROUNDDOWN(17.7/C7,0) or =ROUNDDOWN(39.3/C7,0) depending on which press I am using. The presses are shown in cells d34 - q34. Indigo =17.7 gilboa = 39.3. I have added these numbers to a table in the scales tab a24:e26. Is there a way to write a formula in cell c9 on the input tab to combine the 2 above formulas and insert the correct 17.7 or 39.3 when required?
View 14 Replies
View Related
Aug 20, 2009
to creating formulas in Excel!
Basically, all I want is for a formula to tell me if I have matching data in two separate cells. What I have is data entered in cell A1. What I would like is one single formula to check if the same entry has been entered in cells A2:A10 and if so, return a 1, and if not return 0.
View 9 Replies
View Related
Aug 28, 2009
I need column F to be matched to column E, i want to see how many user id's from column F are in column E and for them to be highlighted in column E. note that the user id's might reflect more than once in column E. See attached..
View 5 Replies
View Related
Oct 15, 2009
Guys im stuck on the fact of how to pull the correct information through for a named person.as from the example if i place say steve in the named box i would like all of steves scores to appear in the designated boxes.and so on.
View 11 Replies
View Related
Jan 29, 2007
I want to match let's say "Elbow" with "Yes" so that when I select the word "Elbow" from a list the word "No" appears on another cell. There are 54 words to match. This is what I'm currently using, however, I could only get to 29 items and I need to match 54.
=CHOOSE(MATCH($J$2:$J$100,{"Abdomen","Acetabulum","Acromioclavicular Joint","Ankle","Arm","Back","Carpus","Cervical","Chest","Clavicle","Coccyx","Elbow Joint","Femur Bone","Fibula","Fingers","Foot","Forearm","Glenohumeral Joints","Hand","Head","Hip","Humerus","Ilium","Ischium"," Joint","Leg","Lower Leg","Lumbar","Metacarpus","Metatarsus","Neck","Patella","Pelvis","Pubis","Radius","Ribs","Sacrum"," Scapula","Shoulder","Spine","Spine - Lumbosacral","Spine - Thoracic","Spine - Thoracolumbar","Sternoclavicular Joints","Sternum","Tarsus","Thigh","Thoracic/Dorsal","Tibia","Toes","Ulna","Upper Leg","Upper Arm","Wrist Joint"},0),"No","No","Yes","Yes","Yes","No","Yes","No","No","Yes","No","Yes","Yes","Yes","Yes","Yes" ,"Yes","Yes","Yes","No","Yes","Yes","No","No","Yes","Yes","Yes","No","Yes")
View 10 Replies
View Related
Mar 11, 2009
I want this formula to return zero if it cannot match the value. Right now it is returning #N/A and i don't want that. I just want to return "0" if it can't match it.
View 4 Replies
View Related
Mar 26, 2009
I am trying to match three items. I have attached an example of what I'm looking for since trying to explain it here would be confusing at best.
View 2 Replies
View Related
May 21, 2014
So Column A has First name, Column B has Surname Column C is empty Column D has list of firstnames, Column E has list of Surnames, Column F has User ID
I want to Look at the Surname in Cell B2 see if I can find a match down Column E, if I do I want to look at the First name next to it in Column D see if that matches Cell A2 and if both match put the User Id in Column F into cell C2
View 3 Replies
View Related
Nov 22, 2007
Need to place an Index(Match) formula in Sheet 2 B2 (as for example). The lookup values in Sheet 2 to be matched with Sheet 1 will be A2, B1 and J1.
In Sheet 1 (Edit) I'm only interest in the subtotal and Sheet 2 J1 represents the subtotal for the week that ends with J1 date.
The Index should be the whole Sheet 1 (if possible) for further expansion (and I do have way more than what is presented below).
Edit
HTML removed by RAM and replaced with a new HTML further down.
View 9 Replies
View Related
Nov 18, 2008
In Cell AA8, I need a formula that will read the 3-digit number in Col Z8 and count the number of rows where a match is found. The 3-digit number can be in any form, Ex Cell Z8,
972 can be 729,279.
************************************************************************>Microsoft Excel - Tic-Tac-Toe -1 +1.xlsx___Running: 12.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutZ8Z9Z10Z11Z12Z13Z14Z15Z16=VWXYZAA811/18/089729727911/17/0843143141011/16/0836036041111/15/0870670611211/14/08067067 1311/13/08143143 1411/12/08603603 1511/11/08729729 1611/10/08534534 Sheet1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View 9 Replies
View Related
Jan 21, 2009
I have the following array formula that identifies the first number in the column I:
=INDEX(I1:I1200,MATCH(TRUE,ISNUMBER(I1:I1200),0))
This formula works fine however I was hoping to expand the range to the entire column. I thought (obviously incorrectly) that the following formula would work:
=INDEX(I:I,MATCH(TRUE,ISNUMBER(I:I),0))
Instead of getting the same result as the first formula, I am getting "#N/A".
View 9 Replies
View Related
Jul 2, 2009
I am using an offset match formula to look at a named range of data and create a validation list of property address's based on certain criteria in cell d1.
My question is it appears the information which is status information seems to have to be sorted, otherwise the list doesnt work properly.
is there another formula to accomplish this with out having to sort the criteria in cell d1 ??
This is the formula i am curently using, it works great if "ListStatus" is sorted and not if unsorted.
=OFFSET(AddressDisplay,MATCH($D$2,ListStatus,0)-1,0,COUNTIF(ListStatus,$D$2))
View 9 Replies
View Related
May 17, 2006
I have attached a formula I have used to extract a value from another sheet (I have also attached where the formula is mean't to extract the value from) . My problem is that this formula is not returning what it should?
The value that should be returned is "416"
View 9 Replies
View Related
Sep 22, 2006
I found the following formula, with different sheet and cell references, on someone's site: =OFFSET(CurvCalc!$E$12,MATCH(MAX(CurvCalc!$E$12:$E$10000)+1,CurvCalc!$E$12:$E$10000,1)-1,0)
I googled for the last couple of days but can't find this site again. I have found several that come close like Dave's at http://www.ozgrid.com/News/excel-dynamic-ranges-vba.htm
http://www.cpearson.com/excel/lookups.htm
http://www.cpearson.com/excel/lists.htm
and Microsoft's at
http://support.microsoft.com/default...;en-us;Q152407
View 3 Replies
View Related
Mar 8, 2007
Why am I getting the "#N/A"s in the enclosed example file.
View 3 Replies
View Related
Jan 15, 2008
I'm having a hard time getting a MATCH formula to return the correct results. See attached workbook. I have a list of names and wish to look for the first 6 characters of each name in another list and return the row number that the 'MATCH' appears in. The formula I am having problems with is in column 'E' of the ' Analysis' sheet. I have entered the expected result in column 'F'.
View 2 Replies
View Related
Aug 4, 2014
How can I modify this formula so it retrieves the 1st matching value (like always), but then the 2nd match, 3rd, etc.:
{=INDEX($A$2:$D$6,MATCH(F2:$F$6&G2:$G$6&H2:$H$6,$A$2:$A$6&$B$2:$B$6&$C$2:$C$6,0),4)} sheet attached: Example.xlsx
View 3 Replies
View Related
Jan 22, 2014
I want to set up a formula which automatically does vlookup or same sort of function on numbers given out by a link through a formula.
As a example i have attached the sheet.
View 1 Replies
View Related
Jan 27, 2014
I have two tabs (In-Transit) & (AC) column A in both sheet have a "Concatenate" that i copied and pasted and values only and also switch the format to "Text" on both tabs. I do a vlookup
[Code] ......
and it returns the results i want....But then i was thinking due to the volume of data what if the value in column A is found twice on tab "AC".. i wouldn't know with a "Vlookup".
So trying to build a Index/Match formula
[Code] ....
I also returns some good results, but i also get some back as #REF. I also get #NA and both of the formulas and those are valid no matches...
View 2 Replies
View Related
Jan 28, 2014
I am needing a formula to sum info from 1 book to another based on two lookup criteria. Its the sort of info you can easily get with pivot tables or filters but my colleague needs a copy and pastable formula so it can be automated.
There are two workbooks Order Index example.xlsxCash Flow book example.xlsx; one called "Order Index" has a list of orders placed along with supplier name (Col C), date due for payment (Col H) and value of order (Col I). The other workbook, used by a colleague is called "Cash Flow" and contains a list of supplier names (Col B) with row 1 containing months (1st Jan 2014, 1st Feb 2014 etc).
Under each month on the "Cash Flow", I need to show the sum of orders due for payment within that month, for each supplier named (in Col B). In other words, sum the figures from the "Order Index" based on supplier name and date due for payment.
Often, on the Order Index there is more than one order per month from a supplier and the dates due are specific days (10th Jan, 21st Jan etc) and these need summing up for the 1st Jan 2014 Column in the Cash Flow book.
View 1 Replies
View Related
Jul 10, 2014
I am not sure where the error is in the formula. Also I would like to add one more condition to it.
Another problem- I created Drop Down using Data Validation. Now I need to make the Drop DOWN ICon visible. It becomes visible only when I click on the cell.
View 6 Replies
View Related
Apr 16, 2009
On the attached spreadsheet, i am trying lookup the selection name in column A on the summary sheet and search through column A of the other three worksheets adding together the three answers but something isn't working as the end answer is incorrect. I have tried vlookup and also tried combining offset/match but neither way i am getting the correct answer. I removed a lot of the data to simplify things and changed the figures to fictional ones for privacy reasons.
View 2 Replies
View Related
May 20, 2009
I am trying to tidy up a large workbook, and need some help with use of range names in the Match function.
I have the formula working on the attached sample, but wonder whether it's possible to get the Match function Lookup Array to pick itself from the range name.
View 7 Replies
View Related
Feb 9, 2010
The formula cant always match words from the arrayand gives me N/A
I have attached the formula i am trying to use . Is there an earier way anyone can recommend. Im sure im over complicating things
View 3 Replies
View Related
Dec 13, 2012
Refer the attached work sheet and any formula to calculate the values once the criteria is met.
To calculate % after multiple look ups.xls
View 7 Replies
View Related