I am looking to take the information from a selected cell in workbook a, and on closing the spreadsheet - moving that piece of data and adding it to the bottom of a list in column d of workbook b....
View 2 RepliesI need to move a lot of data from what was originally a txt document into an easily readable form.
I have used Macro's before but only for very basic routines (so please treat me as a bit dumb when it comes to Macro’s).
I have Include Screen shot of the data highlighted in a colored box and the relevant colored cell I need to move it into.
This needs to be repeated many times with data that is consistent in its layout.
I'm working on a complex spreadsheet and I'm working on a complex spreadsheet system for pulling and measuring data. My VB programming skills are about minimal/average, so you may see me on here asking various questions . In any case, what I'm trying to do is create isolation macros for "Kickback" data (erroneous). I'm trying to remove data with certain criteria and isolate it on a separate "kickback" sheet for one for taking a second look at. I've made the easy macro of creating a new spreadsheet:
Sub Create_Kicbacks_Sheet()
' Create_Kicbacks_Sheet Macro
' Creates "Kickbacks" sheet for invalid information.
Sheets.Add After:=Sheets(Sheets.Count)
Sheets("Sheet4").Select
Sheets("Sheet4").Name = "Kickbacks"
Sheets("Kickbacks").Select
End Sub
This coding works correctly. The problem area I'm finding is the sorting data. My goal is to look at Columns A and B for certain criteria and either leave it alone, move it to the "Kickbacks" sheet or delete (due to not being necessary in data calculations). Basically, here's a synopsis of what I'm looking for:
if Column A = Y and Column B = Mandatory -> Leave Alone
if Column A = Y and Column B = Best Efforts -> Move Row to Kickbacks
if Column A = Y and Column B = Empty Cell -> Move Row to Kickbacks
if Column A = Empty Cell and Column B = Mandatory -> Move Row to Kickbacks
if Column A = Empty Cell and Column B = Best Efforts -> Delete Row
Here's the code I have in excel (modified from one I found online)... Which only is doing some of what I want it to do:
Sub Moveto_Kickbacks()
Dim r As Range, LR As Long
With Sheets("Data")
LR = .Range("A" & Rows.Count).End(xlUp).Row
Set r = .Range("A2").Resize(LR - 1)
.Range("A1").AutoFilter field:=1, Criteria1:=""
.Range("B1").AutoFilter field:=2, Criteria1:="Mandatory"
[code]....
I have a userform which opens when the workbook opens. Ideally Id like to have the userform open without the workbook coming up and have the workbook close when you close the userform. If thats not doable then is there a way to just close the workbook when the userform is closed?
View 3 Replies View RelatedNeed the VBA code to close a workbook, and not save it? I need it to open a workbook, run a macro, and close without saving. The code I have thus far is:
View 3 Replies View RelatedIs there a way (with macros, I''m assuming), to make my workbook always return to the Main tab and Save automatically --- every time somebody closes the workbook from any tab - so that the next person who opens the workbook will have it ready to go on the main tab?
View 5 Replies View Relatedhow I would display a message to the user before the workbook is closed regardless if any changes have been made e.g.
Ideally there would on be an “OK” option only by way of acknowledgement and also no option to close the message by the ‘x’ in top right corner.
I have a pair of macros that together close and reopen a workbook when the user clicks on a button labelled 'Refresh'. The reason for the macros is that any one of multiple users may have the workbook open for editing while the others have it open read-only, and those who have it open read-only will want to refresh it periodically to make sure they're viewing the most up-to-date version.
Now, here's the hitch. If I have the workbook open read-only and refresh it while no-one else has it open for editing, it doesn't reopen read-only (it reopens for editing). But I don't want it to reopen for editing (I want it to reopen read-only). Is there anything I can add to the macros to make the workbook reopen read-only, or is there a different pair of macros I can use? Here's what I have at the moment:
Macro 1
Sub CloseMe()
'
Application.OnTime Now, "OpenMe"
ThisWorkbook.Close SaveChanges:=False
'
End Sub
Macro 2
Sub OpenMe()
'
End Sub
I have a worksheet template with details in cell A1,B1,C1,D1,E1,F1,G1,H1 & I1and when the sheet closes I would like to save a copy of the cell contents to a different workbook called transaction history, is there any way that vba code could write this to the workbook and when the transaction happens again, it then writes the new transaction data to the next row within the same workbook transaction history
View 6 Replies View RelatedI have a userform that has validations in it. One of the validations is to ensure the user has entered in a correct date. Right now if the user has the correct date in the form, but decides they no longer want to add any data into the spreadsheet using the userform, they can simply click the Close Form button at the bottom of the form and the form will close out.
I just discovered however that if the user inadvertently put in an incorrect date and then attempted to close the form, the validations will not allow the user to close the form until they have corrected the date. I would like to set up my close form button to close the form no matter what data has been entered into the form. Basically have it so the close form button overrides any validations within the userform coding. Currently I only have unload me within the cmdClose_Click() sub routine, It looks like this:
[Code]....
Could I use something to the effect of clearing all fields when the close form button is clicked...
[Code] ....
Would this work???
I have a workbook from which i copy data and paste in another sheet, then close first excel. But copied data which is stored in memory gives a warning before closing the excel file.
The code i use is:
Sub Macro1()
Worksheets("Output").Range("A7:e1500").ClearContents
Sheets("Sheet1").Select
ChDir (Range("D3").Text)
Workbooks.Open Filename:=(Range("J4").Text)
Sheets("Final output").Select
Range(Range("P5").Text).Select
Selection.Copy
ThisWorkbook.Activate
[code]....
I recorded a Macro to open a workbook, copy and paste data from one excel workbook to another, and close the workbook which was opened. Everything works fine except:
because of the amount of data that I am copying, I get a message box saying "There is a large amount of information on the Clipboard. Do you want to be able to paste this information into another prgoram later?" with a Yes/No button.
So now I have to click the "No" button before my macro closes the excel file. Is there a simple line of code that will by-pass this?
I am assuming it has to do with the following:
Windows("Book1.xls").Activate
ActiveWindow.Close , savechanges:=False
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies View RelatedNot sure how to say that, but I'm trying to write a simple macro to copy some data and pastespecial (Transpose) it somewhere else on the same sheet. But I don't want to see the data "moving".
Here is an example:
Code:
Sub Macro1()
Set SCOPE = ActiveSheet.Range("D2:G6")
Set THERE = ActiveSheet.Range("M240")
[Code]....
I have a spreadsheet that is finally working great. I made a custom tool bar with 5 buttons and each tied to a seperate macro. On my laptop ( where I developed it) it works great.
I put the whole sheet on on a thumb drive and moved it to another computer. When I load the sheet on the new computer , the tool bars are there but they error saying something about they can not find it.
I went into each button and changed it to put the macros in this workbook, saved it and when I put it on the other computer I had the same issue. I reloaded the original sheet and it went went back to all open workbooks.
I think what I did is saved them to all workbooks and they must be stored on the original computer. I thought just changing the button link would do it but I guess I am wrong.
My question is how do I get the 5 macros to follow the workbook? I need to move this to another computer in the morning.
What I need to do is have the macro move down a cell each time the data is pasted -
Sub saleschartnew()
ActiveWindow.ScrollRow = 3
ActiveWindow.ScrollRow = 2
ActiveWindow.ScrollRow = 1
Range("G3").Select
Selection.Copy
Sheets("Monthly Sales Chart").Select
Range("E10").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Sheets("Entry form").Select
Range("C13").Select
Application.CutCopyMode = False...............
I did search and found this: activesheet.cells(row,Col).offset(0,1).value = " Properties"
However, my knowledge of VBA is basically zero so I am not sure how this would be implemented into the macro.
I am working on a project that has 5 worksheets. I have been able to figure out everything else I need to do but this has me stumped. I have data in Sheet1 A6, that i want to place in Sheet2 A6, Sheet3 A6, Sheet4 A6 and Sheet5 A6 and keep data and formatting(BOLD AND UNDERLINE). So I change Sheet1 A6 and the other 4 sheets change also. I'm using Microsoft Excel 2007.
View 1 Replies View RelatedI'd like to write some code to do the following: When the first cell of the row contains an "Y", move the entire row to another sheet (in the same file), keeping in mind that this sheet already contains some rows (so add the row on the first empty row in the sheet). Afterwards the original sheet contains no longer any rows in which the first cell is filled with an "Y".
View 4 Replies View RelatedI have the code below to add my new sheet and give it todays date (coming from the menu sheet). However I can not figure out how to add the before code so it will save the new sheet at the beginning of all of the sheets every time.
[Code] .....
I have a massive data file with thousands of lines of data. Each line is a pair, for example
View 6 Replies View RelatedI'm trying to create a macro that will allow me to insert two rows to extend two separate tables. The problem is that one table needs to be directly below the other. So if the number of additional rows exceeds the margin between the two tables, the macro will just be inserting two rows into the top table.
I guess I'm looking for a way to get the macro to insert a row, not at a specific row number, but at the first row of the bottom table, which will change as rows are added to the top table.
I have a list of diagnostic procedures, some of which are for the same patient. I need a macro that does the following: move every second procedure (a couple of cells per row) of one patient number (column B) next to (11 cells to the right and 1 row up) the first procedure. But only if there's less than 3 months between the procedures (dates are in column G) and if both procedures were on the same side of the body (left or right, column L)
Is there a macro that can do this for me?
Is there a macro that just moves a couple of cells in a row 11 cells to the right and 1 row up?
The following macro does what I need when run from the active workbook however I need macro to exist in 'personal.xls' so it can be easily applied to raw reports received in daily e-mails.
Sub Add_Sundays_Data()
Dim bk As Workbook
Dim bSave As Boolean
Dim lRow As Long
On Error Resume Next
Set bk = Workbooks("C:Template.xls")
On Error GoTo 0
If bk Is Nothing Then
bSave = True
Set bk = Workbooks.Open("C:Template.xls")
End If
I am not sure if my problem is in the dynamic range or not. I have attached a small sample file. I tried to create a dynamic range by creating a named range of my "LabelRow" with the following as the refers to: =OFFSET($C$32,0,1,0, COUNTA($32:$32))
When I set my cursor on this, Excel makes an outline on the whole row 32 where there is data, which gives me some clue that it understands what I am trying to define. Next, I try to pick this range up and paste it using named ranges in a macro (CopyRange). It gives me an error like it doesn't understand the named range. I do similar macro code in many other places in this project and it works with non-dynamic ranges. Here are some other details on this project. I need a dynamic range because I insert new data into the dataset, which may be 2 quarters up to 20 quarters. This insert causes a regular range to be messed up. My ultimate goal is to graph selected rows of data with the same labels, but I need to have it starting at Q1, which is pushed to the right as new rows are added.
I want to search a word in my Data sheet and want to know what is the column position. Example: I have a word "LastName" as a Column header in my Datasheet whose column position can be anywhere in the datasheet based on the table selected. So i want to write a generic code which give me COLUMN position for this word in the datasheet.
So if "LASTNAME" header is coming as 7th column it return me 7
if "LASTNAME" header is coming as 9th column it return me 9.
I was given a spread sheet with a number of payments on it, I was asked to take the "four" potential payments and only show one total payment. There are 2900 lines in my file and as you can see from the example the scenario repeats it self with the "four" payments all the way to the bottom. I would like to be able to add H2 to H5, total that number in J2 and delete row 3,4 and 5. This then has to be continued all the way down to line 2878 where I could then run a macro I have to delete blank rows cleaning my spreadsheet up. I would take a looping or user controlled macro (ctrl +) so I don't have to do this manually.
Sample_total.xls
Could some one amend the VBA below to allow a continous loop on moving to the previous sheet within a workbook. Currently when I move to the first sheet if I use the shortcut key I get a debug error.
View 6 Replies View RelatedI have a macro that copies and pastes into another sheet. When I add a row of data into my spreadsheet I want the macro to be able to change the range size and copy and paste the add row with the prior data.
View 2 Replies View RelatedI use this macro to open a hyperlink in "column B" of the next row. However, it only works if I begin the macro from "column N" on the line above. (the hyperlink is always located in column B)
I want to be able to run this macro from any cell on the line above. How to modify it?
Code:
Sub Open_Hyperlink()
'
' Open_Hyperlink Macro
'
' Keyboard Shortcut: Ctrl+o
'
[Code]...
HTML Code:
ABCDEFGHIJKLMNO
1ActiveURLWhatDateFirst NameLast NameOtherOther2Other3Street1CityStateZip
2XLinkData112/21/2011BobSmithData2Data3Data4123 MainMooresvilleNC28117
3XLinkData112/22/2011LarryJonesData2bData3Data4456 MainMooresvilleNC28117
4XLinkData112/23/2011MaryAkinData2Data3Data4789 MainMooresvilleNC28117
An example would be to run it while Cell "I2", "J2", or "K2" is selected and have it open "B3"
I have this macro listed below that finds all these files, copies cells from stat sheet and places them in sheet1 in another file. It keeps looping till all is found and done.
My problem is when it goes to paste in sheet 1 I want it to shift over a row each time.
Right now during the first pass it pastes in column B, I want it to start in column D
The issue seems to lie right under where it says "Put data into workbook"
Public Sub PullData()
Dim wkb As Workbook
Dim lngStore As Long
Dim strDate As String
Dim strName As String
Dim Book As String
Dim Sheet As String
Dim week As String
Dim Store As String
Dim IngRow As Long
Dim strCol(0 To 15) As String
strCol(0) = "b"
strCol(1) = "c"
strCol(2) = "d"
strCol(3) = "e"
strCol(4) = "f"
strCol(5) = "g"
strCol(6) = "h"
strCol(7) = "i"
strCol(8) = "j"
strCol(9) = "k"
strCol(10) = "l"
strCol(11) = "m"
strCol(12) = "n"
strCol(13) = "o"
strCol(14) = "p"