Moving Workbook With Macro
Jun 4, 2007
I have a spreadsheet that is finally working great. I made a custom tool bar with 5 buttons and each tied to a seperate macro. On my laptop ( where I developed it) it works great.
I put the whole sheet on on a thumb drive and moved it to another computer. When I load the sheet on the new computer , the tool bars are there but they error saying something about they can not find it.
I went into each button and changed it to put the macros in this workbook, saved it and when I put it on the other computer I had the same issue. I reloaded the original sheet and it went went back to all open workbooks.
I think what I did is saved them to all workbooks and they must be stored on the original computer. I thought just changing the button link would do it but I guess I am wrong.
My question is how do I get the 5 macros to follow the workbook? I need to move this to another computer in the morning.
View 9 Replies
ADVERTISEMENT
Jan 13, 2009
Could some one amend the VBA below to allow a continous loop on moving to the previous sheet within a workbook. Currently when I move to the first sheet if I use the shortcut key I get a debug error.
View 6 Replies
View Related
Sep 23, 2013
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies
View Related
Aug 15, 2014
I have to copy a column from another workbook and past in to the column in this workbook. However the column i am copying are all referenced from other cells. Is there a way to just copy the numbers and move them into this workbook to avoid double data entry?
I am attaching the 2 work books.
1. Is MSP commissions Structure that is where the data needs to be pasted
2. Grace - this is an example of what we will need to be copying from.
On Grace - copy Column G, Rows 65-81... The paste those numbers into MSP commissions structure column D, Rows 9-25......
We will have a file similar to Grace for EVERY deal closed....FYI so this process if possible needs to be replicated many times.
MSP commisson structure.xlsx
File Type: xlsx Grace.xlsx
View 4 Replies
View Related
Jan 18, 2014
I have two workbooks and wish to extract data from the first workbook (second tab), and insert certain cell data into a specific cell in the second workbook (first tab).
The first workbook has this info:
SN
SN
Sort
P/N
Removal
Customer 1
Customer 2
Program
Rec Month
ABCD1234
D1234
1234567899
Scheduled
Customer A
Customer B
Block 10
Nov-13
[Code] .......
This is a very large data set. The S/N will appear multiple times. The rest of the data will change with each entry, but there are some exceptions where it may be the same.
The second workbook has this data:
ID
S/N
A
B
P/N
Born-on-Date
Date Rec
Ship Date
Customer 1
123456
ABCD1234
1 thru 14
Yes or No
1234567899
03/10/2007
11/07/2013
11/22/2013
Customer A
[Code] .......
This too is a very large data set. What I need to do is to find the S/N in the first table "based on the month" and replace the entry under Customer 1 with the associated Customer 2 data entry. The VLOOKUP function can't seem to handle the multiple S/N entries.
View 1 Replies
View Related
May 6, 2008
I am working with two files, both files have multiple worksheets. File A has a worksheet that is filled out almost entirely by equations. I need to move the information from that worksheet into file B. In file B i will process the information further. Also, I will print it and it has to look exactly the way it does in file A. I want all this to happen automatically so I am looking for some sort of function or script that will perform this task.
View 9 Replies
View Related
Nov 23, 2009
I want to move the workbook I have created to a different folder on the same drive. The workbook is pretty big and has loads of links to other workbooks. If I move it will all of these links fail and if so will I have to manually reset them all? I guess I am asking if there is specific method of moving workbooks which will automatically change the links to the cope with the new location?
View 3 Replies
View Related
Jan 29, 2010
I have tried to move data from my active WB to a closed one with the following
View 3 Replies
View Related
Jul 9, 2012
I am having some trouble writing a code for a macro that moves data between documents.
The document that I transfer data from is an excel extract from a survey, so everytime I have to run the macro, it is with a new document with a new name.
I can get so far as to move the first cell information into the other specified workbook, but I cannot get the macro to return to the the first document (the one where the name changes with every use).
View 1 Replies
View Related
Oct 29, 2009
Can someone help me i have a few columns of information i need to move over to a another sheet, but the problem is the information i need to move is the end result of a formula and when i move it the answers are gone how do i fix this,,,,, and both sheets are on the same work book as well
is there a vlookup formula to use,,,im not experienced in Vlookup up formulas
View 9 Replies
View Related
May 15, 2014
I know that the shortcut for moving the cursor to cell A1 of an active sheet within a workbook is Ctrl + Home. However, I thought there was a shortcut (using just keystrokes) to do this for all the sheets within the workbook. Is there such a shortcut?
View 1 Replies
View Related
Sep 1, 2007
I need to move a lot of data from what was originally a txt document into an easily readable form.
I have used Macro's before but only for very basic routines (so please treat me as a bit dumb when it comes to Macro’s).
I have Include Screen shot of the data highlighted in a colored box and the relevant colored cell I need to move it into.
This needs to be repeated many times with data that is consistent in its layout.
View 12 Replies
View Related
Jun 6, 2014
Not sure how to say that, but I'm trying to write a simple macro to copy some data and pastespecial (Transpose) it somewhere else on the same sheet. But I don't want to see the data "moving".
Here is an example:
Code:
Sub Macro1()
Set SCOPE = ActiveSheet.Range("D2:G6")
Set THERE = ActiveSheet.Range("M240")
[Code]....
View 2 Replies
View Related
Apr 23, 2007
What I need to do is have the macro move down a cell each time the data is pasted -
Sub saleschartnew()
ActiveWindow.ScrollRow = 3
ActiveWindow.ScrollRow = 2
ActiveWindow.ScrollRow = 1
Range("G3").Select
Selection.Copy
Sheets("Monthly Sales Chart").Select
Range("E10").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Sheets("Entry form").Select
Range("C13").Select
Application.CutCopyMode = False...............
I did search and found this: activesheet.cells(row,Col).offset(0,1).value = " Properties"
However, my knowledge of VBA is basically zero so I am not sure how this would be implemented into the macro.
View 3 Replies
View Related
Nov 29, 2006
I'd like to write some code to do the following: When the first cell of the row contains an "Y", move the entire row to another sheet (in the same file), keeping in mind that this sheet already contains some rows (so add the row on the first empty row in the sheet). Afterwards the original sheet contains no longer any rows in which the first cell is filled with an "Y".
View 4 Replies
View Related
Mar 17, 2014
I have the code below to add my new sheet and give it todays date (coming from the menu sheet). However I can not figure out how to add the before code so it will save the new sheet at the beginning of all of the sheets every time.
[Code] .....
View 7 Replies
View Related
Jun 5, 2009
I have a massive data file with thousands of lines of data. Each line is a pair, for example
View 6 Replies
View Related
Jan 27, 2010
I'm trying to create a macro that will allow me to insert two rows to extend two separate tables. The problem is that one table needs to be directly below the other. So if the number of additional rows exceeds the margin between the two tables, the macro will just be inserting two rows into the top table.
I guess I'm looking for a way to get the macro to insert a row, not at a specific row number, but at the first row of the bottom table, which will change as rows are added to the top table.
View 3 Replies
View Related
Jul 9, 2012
I am looking to take the information from a selected cell in workbook a, and on closing the spreadsheet - moving that piece of data and adding it to the bottom of a list in column d of workbook b....
View 2 Replies
View Related
Jan 7, 2008
I have a list of diagnostic procedures, some of which are for the same patient. I need a macro that does the following: move every second procedure (a couple of cells per row) of one patient number (column B) next to (11 cells to the right and 1 row up) the first procedure. But only if there's less than 3 months between the procedures (dates are in column G) and if both procedures were on the same side of the body (left or right, column L)
Is there a macro that can do this for me?
Is there a macro that just moves a couple of cells in a row 11 cells to the right and 1 row up?
View 9 Replies
View Related
Jun 3, 2009
The following macro does what I need when run from the active workbook however I need macro to exist in 'personal.xls' so it can be easily applied to raw reports received in daily e-mails.
Sub Add_Sundays_Data()
Dim bk As Workbook
Dim bSave As Boolean
Dim lRow As Long
On Error Resume Next
Set bk = Workbooks("C:Template.xls")
On Error GoTo 0
If bk Is Nothing Then
bSave = True
Set bk = Workbooks.Open("C:Template.xls")
End If
View 9 Replies
View Related
May 18, 2006
I am not sure if my problem is in the dynamic range or not. I have attached a small sample file. I tried to create a dynamic range by creating a named range of my "LabelRow" with the following as the refers to: =OFFSET($C$32,0,1,0, COUNTA($32:$32))
When I set my cursor on this, Excel makes an outline on the whole row 32 where there is data, which gives me some clue that it understands what I am trying to define. Next, I try to pick this range up and paste it using named ranges in a macro (CopyRange). It gives me an error like it doesn't understand the named range. I do similar macro code in many other places in this project and it works with non-dynamic ranges. Here are some other details on this project. I need a dynamic range because I insert new data into the dataset, which may be 2 quarters up to 20 quarters. This insert causes a regular range to be messed up. My ultimate goal is to graph selected rows of data with the same labels, but I need to have it starting at Q1, which is pushed to the right as new rows are added.
View 2 Replies
View Related
Sep 4, 2007
I want to search a word in my Data sheet and want to know what is the column position. Example: I have a word "LastName" as a Column header in my Datasheet whose column position can be anywhere in the datasheet based on the table selected. So i want to write a generic code which give me COLUMN position for this word in the datasheet.
So if "LASTNAME" header is coming as 7th column it return me 7
if "LASTNAME" header is coming as 9th column it return me 9.
View 5 Replies
View Related
Jan 27, 2014
I was given a spread sheet with a number of payments on it, I was asked to take the "four" potential payments and only show one total payment. There are 2900 lines in my file and as you can see from the example the scenario repeats it self with the "four" payments all the way to the bottom. I would like to be able to add H2 to H5, total that number in J2 and delete row 3,4 and 5. This then has to be continued all the way down to line 2878 where I could then run a macro I have to delete blank rows cleaning my spreadsheet up. I would take a looping or user controlled macro (ctrl +) so I don't have to do this manually.
Sample_total.xls
View 4 Replies
View Related
Mar 9, 2009
I have a macro that copies and pastes into another sheet. When I add a row of data into my spreadsheet I want the macro to be able to change the range size and copy and paste the add row with the prior data.
View 2 Replies
View Related
Feb 14, 2012
I use this macro to open a hyperlink in "column B" of the next row. However, it only works if I begin the macro from "column N" on the line above. (the hyperlink is always located in column B)
I want to be able to run this macro from any cell on the line above. How to modify it?
Code:
Sub Open_Hyperlink()
'
' Open_Hyperlink Macro
'
' Keyboard Shortcut: Ctrl+o
'
[Code]...
HTML Code:
ABCDEFGHIJKLMNO
1ActiveURLWhatDateFirst NameLast NameOtherOther2Other3Street1CityStateZip
2XLinkData112/21/2011BobSmithData2Data3Data4123 MainMooresvilleNC28117
3XLinkData112/22/2011LarryJonesData2bData3Data4456 MainMooresvilleNC28117
4XLinkData112/23/2011MaryAkinData2Data3Data4789 MainMooresvilleNC28117
An example would be to run it while Cell "I2", "J2", or "K2" is selected and have it open "B3"
View 2 Replies
View Related
Mar 31, 2007
I have this macro listed below that finds all these files, copies cells from stat sheet and places them in sheet1 in another file. It keeps looping till all is found and done.
My problem is when it goes to paste in sheet 1 I want it to shift over a row each time.
Right now during the first pass it pastes in column B, I want it to start in column D
The issue seems to lie right under where it says "Put data into workbook"
Public Sub PullData()
Dim wkb As Workbook
Dim lngStore As Long
Dim strDate As String
Dim strName As String
Dim Book As String
Dim Sheet As String
Dim week As String
Dim Store As String
Dim IngRow As Long
Dim strCol(0 To 15) As String
strCol(0) = "b"
strCol(1) = "c"
strCol(2) = "d"
strCol(3) = "e"
strCol(4) = "f"
strCol(5) = "g"
strCol(6) = "h"
strCol(7) = "i"
strCol(8) = "j"
strCol(9) = "k"
strCol(10) = "l"
strCol(11) = "m"
strCol(12) = "n"
strCol(13) = "o"
strCol(14) = "p"
View 9 Replies
View Related
Jan 20, 2008
Is it possible to move rows of data in a spreadsheet to multiple spreadsheet accordingly?
I had lists of tasks in a single spreadsheet and i need to segregate the tasks for all my staff in serial while no duplication among all of them. For instance, i got 4 personals in my department and i need the 1st 4 tasks to be distribute to each of them and next 4 tasks accordingly. This is due to all tasks are equip with due date and i need to calculate how much time i need to accomplishing them. i'm used to manually move it and found it time consuming, so i was wondering if someone would instruct me where or how to achieve it by using a simple macro.
View 9 Replies
View Related
May 12, 2009
Sub Moveit2()
Dim Quantity As Range
Dim Cell As Range
Dim Cell2
Dim Breaks As Range
Set Quantity = Range("a2", "a21")
Set Breaks = Range("g1", "s1")
For Each Cell In Quantity
For Each Cell2 In Breaks
If Cell2 = Cell Then
Intersect(Cell2.EntireColumn, Cell.EntireRow) = Cell.Offset(0, 1)
End If
Next Cell2
Next Cell
End Sub
I have this macro to move things to the right. Sort of like a vlookup in a way. However, it runs using one range @ a time. For example it will look up the quantity in A2 versus what's in Row 1 and if they match, data from B2 would be moved into correct column. However, I'd like to run for multiple columns at the offset so I can don't have to keep changing data in the macro. Like want to run for these ranges at the same time as running the first range.
Set Quantity2 = Range("c2", "c21")..........
View 9 Replies
View Related
Jan 25, 2008
My command buttons are moving location after I run a macro. I have a worksheet with 5 command buttons from the forms toolbar. When the macro is run, another command button is moved into the cell that the macro ends in, how can I stop this?
View 7 Replies
View Related
