I want a code to Hide the row if "sum of numbers in columns three thru last column" = 0. Means, if the sum of all the cell (except first and second cells in that row) in a row is zero, then that row should be hidden.
View 9 RepliesI want a code to Hide the row if "sum of numbers in columns three thru last column" = 0. Following is a code I use to delete a row if that is blank. The difference here is that I dont want to to check first two columns and I want to hide them rather than deleting.
View 4 Replies View RelatedI am attempting to hide a series of rows based on if the cells in that row are blank. The catch is that the field of data in the column may vary as follows:
D E F G
x x X x
x X x
x
I would like to eliminate all the rows past the last X value in Column D for example
Below is the code I am attempting to use
Rows("41:60").Select
ActiveWindow.ScrollRow = 41
ActiveWindow.ScrollRow = 42
[Code].....
Like to create a macro (button) to hide / unhide rows based on a cell value
Example
A1=No then hide roa A
C1=No then hide row c
I have read several related threads and tried to adapt their answers to my application with no success. I am trying to write a macro that will hide rows based on that row's value in a certain column. Specifically, column AB contains sums and if a sum equals 0 I want to hide that row. The sums start at AB5 and go to AB118 but there are 4 gaps in the column at rows 25, 47, 70, and 94.
View 9 Replies View RelatedMy company has a canned template for some of the work we do and to avoid wasting too much paper I wanted to insert some extra code into an already programmed macro button (which sets the page breaks) to hide forms (both as individual worksheets and rows within separate worksheets) if the field that ought to auto-fill them is left empty.
View 3 Replies View Relatedway to automatically hide a row or column based on a specified cell.
Or even something general like: Hide all rows with cells evaluating to #n/a.
I am trying to create a macro that will work on my master summary sheet. The sheet pulls information from other worksheets. I would like to have a macro that will look at range E7:E356. If the value is 0 then hide, but if the value changes then unhide the row. I have tried autofilter but it will not update automatically.
View 1 Replies View RelatedI want a macro to hid rows based on a specific value of a cell compared to another.
Example, In a cell I have the current date and time which updates when the the sheet is opened... On a row I have various info including another date in the past. When the date in the past goes over 6 months older than the current date, I want to hide that whole row.
Is this possible? Do I use an IF function in the macro I've seen to remove rows based on cells with specific values?
I need to do: Based on whether a cell returns "Export" from a vlookup function, I need a macro to run, hiding some cells and unhiding others at the same time. Also, if possible, if the cell's value changes from "Export" to something else, I need it to revert back to the original hidden/visible rows.
Like to create a macro (button) to hide / unhide rows based on a cell value
Example
A1=No then hide roa A
C1=No then hide row c
I just need a quick and easy macro that hides rows that have a 0 in columns H, I, J, K, or L.
View 11 Replies View RelatedI have a data validation cell that has 5 items to be selected, lets say A-E.
I would like a macro that checks and does the following:
A or B selected, hide row 25-34, rows 45- 53
C or D selected, hide row 24-44
E selected, hide rows 34-53
In each case, the macro should check and unhide all rows between 25-53 before doing the above
I would like to hide rows for data that does not meet specific criteria. For example: If a user selects room number 101 from a drop down in B1, I want to filter data in range A3:F1000 to show me only room 101 rows (A column) where C column contains a value larger than zero OR D column contains a value larger than zero OR E column contains a value larger than zero. I do not want it to return rows where 101 may be in other columns beside A.
Sample:
A B C D E F
__________________________________
1 ROOM: 101
2
3
4 101 XX 1.2 0 0 P
16 101 YA 0 0 1.1 L
23 101 JJ 3.2 2.1 0 L
55 101 JJ 0 0 1 P
So, if a row contains 101 in column A and all three values in columns C, D, and E equal 0, then those rows will be hidden.
I have a spreadsheet that calculates percentages and then outputs the results to a pie chart. There are 9 different percentages being graphed in cells A41 to A49. The chart looks weird if any of the percentages end up being 0, so I have the formula set to add 0.00001 to each calculation (so they show up as 0% and display on the chart as 0%, but truly are 0.00001). I would like it so that if any of these 9 percentages ends up being 0 (or really 0.00001) that the row automatically hides and thus won't display on the pie chart. How can I create a macro that automatically runs to accomplish this, and automatically updates as percentages are recalculated.
View 3 Replies View RelatedOperating System: Windows XP, Excel version: 2003
Aim: To create a Macro to hide all rows where the date in column D is before today. Column D has about 600 rows.
Current solution:
Code:
Sub Hide_Old2()
'Worksheet name
With Worksheets("Schedule")
'set start of date range
Set rngStart = .Range("D2")
'find end of date range
[Code] .....
The problem with this solution is its speed, or lack thereof. It causes the screen to hang and flicker while it cylces through. Is there some way to create a range based on the date and hide the range? or another solution?
Note: Autofilter is not an option, as the spreadsheet with the dates needs to be kept simple for other stakholders and the macro is being run from another sheet.
(Excel 2010): Hide row if cell C in this row is empty.
I've just started using macros and I'm sure there is one for this problem.
I have a worksheet used for inventory. In Column A is the quantity (to be entered manually). In Column B is the product description. In Column C is the price of the product, and Column D the total price (column C price x the quantity entered in Column A). At the bottom of the worksheet is a grand total. Also, Column B (products) is grouped into subheadings by the supplier each product came from (for example, row 6 has the title PPG, and then rows 7-137 list every product from PPG).
The calculations in this worksheet work fine. What I am trying to do is, using a macro once all of the appropriate quantities are entered in column A, automatically hide every row of product that does not have a quantity. The tricky part is, if no products under a given supplier subheader are entered, the subheader also hides, and if a quantity is entered, that subheader shows. For example, if I have no quantities under any products for PPG, then the PPG subheader hides, but if just one quantity is added, PPG shows. Also, this list will be constantly updated, new products will be put in and taken out all of the time, so I cannot base the macro on a specific number of rows.
Data file with few columns. There are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
See here Fill Cells.xlsx
I'm trying to hide rows in an excel sheet based on two stipulations. I want to hide the row if it finds a particular value in column B and a different particular value in column K, otherwise i want it to do continue looping until it has hidden all rows that meet both stipulations.
VB:
Sub hide_loop()
Dim bl As Excel.Range
Dim blrange As Excel.Range
[Code]....
Currently I have tried different approaches, like a Do Loop, but I could not make that work, and this seems closer. The problem I'm having right now is that with this loop it hides everything found in column B regardless of what is in column K. I suspect this is because of the code following the if statement.''
I have a spreadsheet that is split in two parts , one with headers in row 16 with data flowing down to row 190. In row 192 I have another set of headers with data flowing down from that to row 300.
I have a userform (roughly at cell B13 in the attached) that filters the first block of data into either Company, Syndicate, EU Corporate or ALL. (ignore the other filters) which feature in range B18:B190
What I want it to do, is that when one of the three options is selected, ie Company, is that all rows from 193 down are hidden other than those that are also Company (in the test case there is just one row). The same is true for when Syndicate or EU Corporate are selected in the userform, and if the ALL is selected then none are hidden.
I need to write a macro that will hide several rows if a calculated date's month is not within the month of the report.
Example:
If month of date in cell B20 is not the same as the month of date in cell A5
then hide rows 20 thru 30 if it is the same month, display rows 20 thru 30.
I need to do this comparison twice. If month of date in cell B40 is not the same as the month of date in cell A5 then hide rows 40 thru 50 if it is the same month, display rows 40 thru 50. The dates in B20 and B40 are the result of a calculations (Date in cell A5 plus some number of days) if that makes any difference. I don't think it should.
I need to filter out rows, based on a specific value in column A, (documents on file for the clients), then check column C (last name) and D (client first name), which can have the same client listed multiple times, based on how many different documents are on file ......
View 12 Replies View RelatedWhat am I doing wrong here?
I have a code and it doesn't error out, but it won't hide the rows either. I'm pretty sure the red is what needs to be altered. I've tried adding "Selection.", "Rows." and "Cells." and none of them are working.
I am using windows 7, and excel 2007. I want to hide rows bases on a value in cell G2 which is a date field
Example, if G2 is greater than 11/16/2011 then hide rows 1969 through 2032.
With a piece of code that will hide an entire row if a cell value in that row does not equal the cell value of another row.
Example
Cell d3 = Feb 2012.
Range C5:c252, = a mix of Feb 2012 and Mar 2012.
I want to hide all the Mar 2012.
However if Cell d3 = Mar 2012 then the range C5:C252 will also = Mar2012
I want to see all the rows within that range.
I am creating a survey and have used combox,i want hide rows if the result in the combobox is no
View 1 Replies View RelatedI am trying to auto hide rows in a spread sheet. the start row will always be 55 and the end row will be 55 + the value of cell A38 in sheet titled "Main".
View 2 Replies View RelatedI wrote some simple code to work through a number of rows and hide the rows which contain a value of "XXX". For some reason, when the code hits the line denoted with? it hides the first row of "XXX"'s but then starts all over again at very first line of code outside the loop.
Sheet1. Range("start_1").Select 'cell c53
Do Until ActiveCell.Value = "EOF" 'cell c266
If ActiveCell.Value = "XXX" Then
Selection.EntireRow.Hidden = True '????
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.Offset(1, 0).Select
End If
Loop
I have the following code to hide rows based upon whether or not the cell in column A is black or not.
Sub hide_black()
Dim Rng As Range
Dim MyCell As Range
Set Rng = Range("A2:A36635")
For Each MyCell In Rng
If MyCell.Interior.ColorIndex = 1 Then
MyCell.EntireRow.Hidden = True
End If
Next MyCell
End Sub
I was thinking of taking this one step further and having the rows hide automatically once the cell is turned black allowing the user to bypass having to click on a macro button.