Macro To Separate Data By Date
Jun 17, 2009
I am venturing into the unknown with this macro. I am attempting to take a sheet that has already been sorted by name.
It deals with payroll, and the sheet does include the last day of payroll in column F. The actual day worked is in column C.
The problem is that I sum all of the hours worked for each individual person, but I need to exclude hours that are not within the pay week.
Currently they are summed in a new row along with the hours from that week. Does anyone have any suggestions for a macro that could handle this task.
View 20 Replies
ADVERTISEMENT
Aug 10, 2009
I have a cell with both date & time and I need to separate this into 2 separate cells, 1 for the date and 1 for the time. Sample is attached for the before and after formats.
View 3 Replies
View Related
Aug 19, 2013
I have used data validation to colour rows in one of my spreadsheets at work. The column that uses the data validation is the first column and has a drop down list of 5 words. One of which is collected, which currently indicates when the card has been collected by the individual in question and no further attention is required. It colours the rest of the row green. There is also a column that is entitled 'Date Collected'. Instead of having to input this manually, is there a way to automatically enter the date to be the date that the 'Collected' value was selected?
The title is misleading, I realise there will need to be some sort of IF statement in the 'Date Collected' column. It's been a long day already.
View 6 Replies
View Related
Oct 28, 2009
I have a spreadsheet where raw data is entered ("RAW_DATA") for each month it is collected. There are 7 questions that are tallied and each of those responses are transfered to a separate data table for analysis (7 individual tabs within the spreadsheet). I'm currently manually data entering the values from the raw data tab to the other seven tabs.
I would like to have VBA code that could transfer the data from one month ("RAW_DATA") onto the other 7 tabs based on the date and facility identified in the raw data tab. I have not attempted the VBA since I do not know where to start with searching on two variables.
View 2 Replies
View Related
Apr 23, 2014
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies
View Related
Feb 10, 2014
I got a column of data in format as below:
Column 1:
ABC - AC123
ASD - DS335
BBC - KK311
SWT - TR735
TIM - DN849
Between two texts to be separate, there is a " - ", we can separate them with that symbol right?..The cells should be look like after separate shown belows:
Column 1:
ABC
ASD
BBC
SWT
TIM
Column 2:
AC123
DS335
KK311
TR735
DN849
What is the macro code to do this
View 3 Replies
View Related
Oct 30, 2010
I have a macro below which splits the data in my workbook (Attached) into seperate workbooks on the basis of each change in data, and saves the new workbooks with the value available in column A. Everything else works perfectly with this code I just want the code to take the workbook name from Column B, not Column A as it is currently taking.
Sub Test()
Dim Sh As Worksheet
Dim Rng As Range
Dim c As Range
Dim List As New Collection
Dim Item As Variant
[Code] ......
View 9 Replies
View Related
Mar 25, 2014
I have a worksheet that has time clock information. I also have a resource on the web to see some information and even export it. In the exported data it looks as follows:
A1 contains an individuals name
B1 says times i.e. "8am to 5pm"
I would like a macro that takes the data from A1 and moves it to another worksheet in the B4 position down, and take the times from B1 and move the first time to the C4 position and the last time to H4.
View 9 Replies
View Related
May 8, 2006
I am trying to use a macro to compare data from 2 sheets and spit out matching data in a third sheet. The first sheet has two columns of data. the second sheet has 4 columns of data. Only one column from sheet 1 and 1 column from sheet 2 will actually have matching data.
All other columns in sheet 1 and 2 are associated to the matching columns and must "tag along" into the 3rd sheet. I would love the third sheet to have a button that I just click and it populates the data.
The macro will be comparing between 50,000 and 500,000 items. Possibly a good book to use or even a referral for a proffesioanl or even some good heartedness,
View 5 Replies
View Related
Nov 18, 2011
I have an excel spreadsheet laid out as:
A B C D E F G H I J K L M N O
1 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
2 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
3 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
4 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
5 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
I need a macro that can automatically export the cell data for each row from Column A--> O into it's own seperate text file, and name each text file with the text in column A. So again... everything in row 1 from A to O would be copied and pasted into a text file called (A1 cell data).txt
once that first text file has created, I was hoping that there could be a loop to automatically close the first text file and move on to row 2 and do the same, copy all text in row 2 from A to O into a new text file titled (A2 cell data).txt, close and move on to row 3 etc etc.
this is a large list of approximately 8,000 records.
View 1 Replies
View Related
Dec 3, 2013
I need to create a Macro that will link Horizontal data to vertical data in a separate sheet. Here's the Example:
I have data in a forecast spreadsheet that is horizontal, So, J2:U2 (12 columns for 12 months). This row of data needs to be linked in a single column of data on a separate sheet called "Price_Quantity". So I need C3:C14 (in price_quantity sheet) to be linked to the data in J2:U2 (in forecast sheet). Then C15:C26 needs to be linked to J3:U3, so on and so forth. 12 rows linking to 12 columns. All the way until C4959:C4970 is linked to J415:U415.
View 6 Replies
View Related
Nov 24, 2013
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
Below is the data.
10010
10011
10011
[Code] ....
View 6 Replies
View Related
Mar 6, 2014
I have a string of data coming from a SQL Server data connection into my workbook. The value in the column is a text string that is pipe delimited. I need a macro to parse the data from that column into applicable separate columns. I would typically use text to columns for this and parse it out manually... but the tool I'm creating is one of the automated variety, so that will not suffice for this application. I need it to do this automatically when the data connection refreshes.
U:U AQ AR AS AT AU AV
to
Produce|Fruit|apple|banana|cherry|date Produce Fruit apple banana cherry date
View 2 Replies
View Related
Jun 4, 2014
I have an invoicing spreadsheet, what I want is to have a main working page and then tabs after separated by vendor, but save myself a bunch of manual work in the future.
I want to be able to work in the main tab and the other tabs automatically update with the new info.
So I want the macro to search the text in the first column and if it finds "AIM Land Services Ltd." then I want it to populate the appropriate tab, in this case "AIM", with all the respective information after it ie: A-O. But I dont want it to select any other vendors/ info.
This is what I have:
Sub MoveData()
For Each cell In Range("A1:A1") ' Where to look for the date
If cell.Value = "AIM Land Services Ltd." Then ' The date
Range("A5:O350").Select ' What is the range to copy
Selection.Copy ' Copy it
Sheets("Invoice_Log").Select ' Select the Sheet it applies to
Range("A5").Select ' Where to paste the data
[Code] .........
View 1 Replies
View Related
Nov 18, 2013
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
View 6 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Aug 15, 2003
Scenario: Master List, which has all the U.S. states in it.
What I Need to Do With It: Divide out EACH state's information and put it on a seperate worksheet.
I've only recently started using macros (to format various documents for easier printing), but now that I'm starting to understand them conceptually, I'm thinking there Should Be some way for me to program a "macro"-type thing to run on the master list and come out with all my state lists, looking beautiful in seperate files.
View 9 Replies
View Related
Jan 25, 2012
I have a table that I've imported into excel. Below are 2 samples of the information in the cells..
A1 = T(APPLICANT_1_RECENT_PROPERTY_TYPE_DESCRIPTION)/V(Unspecified)
A2 = T(APPLICANT_1_RECENT_PROPERTY_TITLE)/V(U)
Basically I would like to separate into 3 columns as such
From A1;
B1 = APPLICANT_1_
C1 = RECENT_PROPERTY_TYPE_DESCRIPTION
D1 = Unspecified
From A2;
B2 = APPLICANT_1_
C2 = RECENT_PROPERTY_TITLE
D2 = U
When Importing I can't use delimited or fixed width. I can do this with Find and Replace and copying cells, but thought there might be a more savvy way to do this.
View 6 Replies
View Related
Mar 4, 2014
How can i count "how many "A" for period date in table and date out table in this case"
Date inDate outresult Count
05-Mar08-MarA ?
05-Mar09-MarB ?
06-Mar07-MarA ?
07-Mar08-MarB ?
07-Mar08-MarB ?
08-Mar09-MarC ?
05-Mar08-MarA ?
05-Mar08-MarA ?
View 3 Replies
View Related
Apr 29, 2014
I am very new to Excel. The date is in column B as Tuesday, 29 April 2014, but I need to format the spreadsheet in such a way that every day of the week is a different colour e.g. Tuesdays are Blue, Wednesdays will automatically turn pink etc. how will I do that?
View 2 Replies
View Related
Feb 18, 2014
I have workbooks based on the date. Here is an example "Daily Numbers Report - Summary_2014_02-18-06-02-30"
All of the files are formatted this way. Then, in a master file I have dates going horizontally for the entire year in the following format Tue Jan 15, etc. How could I do a lookup that would grab from all of the open files and match the date BUT subtract 1 day from that date for all the lookups, so Feb 18 would look at 2-17?
View 5 Replies
View Related
Aug 20, 2014
After I imported this data, the date and time is in the same column in the format of "mm/dd/yyyy hh:mm:ss" military time. How do I write a VBA code to split up the date and time into two separate columns. One column would only have "mm/dd/yyyy" while the other only have "hh:mm:ss" in military time.
Eventually, I need to extract information from the data by looking for a specific time. I would also plot time vs something.
I don't know if treating it as a string would work, because it would just become a text rather than a time, right?
View 10 Replies
View Related
Mar 25, 2014
How to convert this cell date time to 2 separate cells
A1 = 20140320 093000,
to B1 = 2014/03/20 and C1 = 09:30:00 am
View 2 Replies
View Related
Jun 5, 2014
I have some imported data that lists the date in separate columns.
i.e.
ColumnA ColumnB ColumnC
January.......10.........2013
How do I convert this to a date by using a formula? Later I want to use the date in an array formula to sort the list.
View 8 Replies
View Related
Mar 21, 2012
So I have a workbook that has a range of dates in one column and a corresponding range of times in the column next to it. On a separate sheet I want to return the lowest time&date, and then the maximum time&date. I've tried a few different things but nothing is working.I tried this:
Code:
=MIN(B:B+D:D)
This didn't work for some reason. It did return a time, but it wasn't the lowest. The maximum wasn't even close.
Previously I was just doing the min/max of the date in one cell and then the min/max of the time in a different one, but obviously that didn't work since the time wasn't going off of the maximum date, so it was just showing the lowest time period.
View 9 Replies
View Related
Jan 9, 2013
I calculate total labor hours entered into a CRM system and use it for various reports, but it's incredibly inaccurate for the following reasons:
Any labor put in between 6pm EST and 8am EST from Mon-Fri is considered "on call"All labor from Friday 6:01pm - Monday 7:59am is considered "on call"Labor entered on a company recognized holiday is considered "on call"Not every employee takes call
So, what I'm trying to do is take the total labor and pull out only the hours entered outside of the criteria above. If it were simply based on time during the week, i'd be fine, but I have no clue how to do everything else.
In the end, my new labor hours would be split into "Business Hrs. Labor" and "On Call" labor.
View 1 Replies
View Related
Nov 7, 2013
I have 2 fields formatted like this:
1) Date: "30/10/2013"
2) Time: "10:56:39:000"
I need it to read/merge into: "30/10/2013 10:56:39:000" and then be able to be able to be converted intp seconds as a UTC Unix epoch example formula =(A1-25569)*86400.
View 1 Replies
View Related
Mar 20, 2014
I am assessing the impact of product price increases on volume (qty) and sales (£/$).
The prices are changed sporadically and at no set intervals. For example pries were changed on the 15th Jan and 13th Feb this year.
We have set reporting dates (calender months) so i am hoping to be able to divide the report which shows sales & qty's during the 15th Jan - 13th Feb segment and apportion them to the correct months.
I have the start & end dates of the calender months in cells A4:B18 and each time a new report is run (ie 15th Jan or 13th Feb, these dates go across the top i.e. cell C3 = 15th jan & D3 = 13th Feb.
I would like to return a % in cell C4 which relates to the amount of total days in the segment that relate to Jan (ie. 29 days in the segment, 16 relate to Jan so 55.2%).
Cell C5 would then return a % which relates to the amount of total days in the segment that relate to Feb (29 days in the segment, 13 relate to Feb so 44.8%).
Cells D4&D5 would return the next reporting segment and how many days in Jan/Feb respectively (the answer will be 0 but a constant formula acrosss all would be perfect. tried to give as much info as poss.
View 2 Replies
View Related
Jul 15, 2014
splitting out date/time strings to separate cells, but I cannot find how to split the following.
I have the serviceable date of an aircraft delivery set as 'S hh:mm dd-mmm-yy', which is due to being used by an external application in this format. This is entered by the user and I need to be able to extract the date time strings and switch them to dd-mmm-yy hh:mm, excluding the S from the result as a formula in another cell.
I keep getting a #value error or returning the whole string result.
View 3 Replies
View Related
Jun 30, 2014
I have attached a sheet that has part of a data list, sheet called (Full Data) what i am trying to do is seperate the data into event locations into individual sheets.
The data ref will be column F which is the different event locations.
I thought the best way to try and do this was to create an if/ match formula using the sheet tab names as the if match, with the event locations in column F.
I have added two sheet tabs so you can see that i require the data for (Ain) to be put into the Ain sheet.
The data list in Full Data sheet will be continuously updated so i will need the range to be around 10,000 entries.
View 5 Replies
View Related
