Basically I would like to separate into 3 columns as such
From A1;
B1 = APPLICANT_1_
C1 = RECENT_PROPERTY_TYPE_DESCRIPTION
D1 = Unspecified
From A2;
B2 = APPLICANT_1_
C2 = RECENT_PROPERTY_TITLE
D2 = U
When Importing I can't use delimited or fixed width. I can do this with Find and Replace and copying cells, but thought there might be a more savvy way to do this.
I have a cell with both date & time and I need to separate this into 2 separate cells, 1 for the date and 1 for the time. Sample is attached for the before and after formats.
splitting out date/time strings to separate cells, but I cannot find how to split the following.
I have the serviceable date of an aircraft delivery set as 'S hh:mm dd-mmm-yy', which is due to being used by an external application in this format. This is entered by the user and I need to be able to extract the date time strings and switch them to dd-mmm-yy hh:mm, excluding the S from the result as a formula in another cell.
I keep getting a #value error or returning the whole string result.
I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.
I'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C Wells 123 Wells 123 Wells 1234 Wells 1234 Wells Fargo 123 Wells Fargo 123 Wells Fargo 1234 Wells Fargo 1234 Wells Fargo Inc 123 Wells Fargo Inc 123 Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
I have a range (D5:BU5) that I will have various dates in each cell. At the end of the row is a percentage block. It has the formula count=(D5:BU5)/70 which gives me a percentage complete. The fun begins where some dates are based off annual, semi-annual, and quarterly. What I want to do is be able to delete cell values so they are not reflected in the final percentage. I know there is a marco that deletes the entire row but that is too much I just want a target cell.
i created a work sheet with the help of the wonderful people on this forum. my boss loved it! one problem they now want it to automaticly take out a date and time of the cells when the date rolls around again.
example:
12/25/05 late 00:20:06 when 12/25/06 rolls around they want the system to automaticly see it and delete it out with the amount of time they were late or sick ect.... or if the sup was out that day and comes in the next day the system will see that the date has past and will up date the info. the other catch is i need it to move everything up one space when it deletes somthing. i want it to read j18 and k18 as one and so through j and k 40 same for l and m n and o ect.... i attached the sheet
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
I have a large dataset where the first column is date and time i.e. "20/01/2005 03:41:06" and I want to delete certain rows based on the times. I have already tried playing about with macro's but failed fairly spectacularly so far. I have code from someone else to delete cells if the value equals a certain time but this doesn't work as the cell contains the date too.
I have already recorded one macro to reformat the data to as the software return 10 timestamped samples per hour and I want 8 i.e. every three hours so there is constant separation for statistical purposes. Both the macros are shown below so you can see what I have.
Ideally I would like to replace the line - If (r.Cells(n, 1) = TimeValue("22:41:06")) ............ - with one that reads - If (r.Cells(n, 1) CONTAINS TimeValue........ - but I don't know if that is possible? If not is there a way to separate the time from the date into 2 columns and then I can delete rows based on the time column using the code below? .......
I am venturing into the unknown with this macro. I am attempting to take a sheet that has already been sorted by name. It deals with payroll, and the sheet does include the last day of payroll in column F. The actual day worked is in column C. The problem is that I sum all of the hours worked for each individual person, but I need to exclude hours that are not within the pay week. Currently they are summed in a new row along with the hours from that week. Does anyone have any suggestions for a macro that could handle this task.
This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.
I would like to have a seperate start date cell and a go live date cell.
The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.
I am very new to Excel. The date is in column B as Tuesday, 29 April 2014, but I need to format the spreadsheet in such a way that every day of the week is a different colour e.g. Tuesdays are Blue, Wednesdays will automatically turn pink etc. how will I do that?
I have workbooks based on the date. Here is an example "Daily Numbers Report - Summary_2014_02-18-06-02-30"
All of the files are formatted this way. Then, in a master file I have dates going horizontally for the entire year in the following format Tue Jan 15, etc. How could I do a lookup that would grab from all of the open files and match the date BUT subtract 1 day from that date for all the lookups, so Feb 18 would look at 2-17?
After I imported this data, the date and time is in the same column in the format of "mm/dd/yyyy hh:mm:ss" military time. How do I write a VBA code to split up the date and time into two separate columns. One column would only have "mm/dd/yyyy" while the other only have "hh:mm:ss" in military time.
Eventually, I need to extract information from the data by looking for a specific time. I would also plot time vs something.
I don't know if treating it as a string would work, because it would just become a text rather than a time, right?
I have used data validation to colour rows in one of my spreadsheets at work. The column that uses the data validation is the first column and has a drop down list of 5 words. One of which is collected, which currently indicates when the card has been collected by the individual in question and no further attention is required. It colours the rest of the row green. There is also a column that is entitled 'Date Collected'. Instead of having to input this manually, is there a way to automatically enter the date to be the date that the 'Collected' value was selected?
The title is misleading, I realise there will need to be some sort of IF statement in the 'Date Collected' column. It's been a long day already.
So I have a workbook that has a range of dates in one column and a corresponding range of times in the column next to it. On a separate sheet I want to return the lowest time&date, and then the maximum time&date. I've tried a few different things but nothing is working.I tried this:
Code: =MIN(B:B+D:D)
This didn't work for some reason. It did return a time, but it wasn't the lowest. The maximum wasn't even close.
Previously I was just doing the min/max of the date in one cell and then the min/max of the time in a different one, but obviously that didn't work since the time wasn't going off of the maximum date, so it was just showing the lowest time period.
I calculate total labor hours entered into a CRM system and use it for various reports, but it's incredibly inaccurate for the following reasons:
Any labor put in between 6pm EST and 8am EST from Mon-Fri is considered "on call"All labor from Friday 6:01pm - Monday 7:59am is considered "on call"Labor entered on a company recognized holiday is considered "on call"Not every employee takes call
So, what I'm trying to do is take the total labor and pull out only the hours entered outside of the criteria above. If it were simply based on time during the week, i'd be fine, but I have no clue how to do everything else.
In the end, my new labor hours would be split into "Business Hrs. Labor" and "On Call" labor.
I need it to read/merge into: "30/10/2013 10:56:39:000" and then be able to be able to be converted intp seconds as a UTC Unix epoch example formula =(A1-25569)*86400.
I am assessing the impact of product price increases on volume (qty) and sales (£/$).
The prices are changed sporadically and at no set intervals. For example pries were changed on the 15th Jan and 13th Feb this year.
We have set reporting dates (calender months) so i am hoping to be able to divide the report which shows sales & qty's during the 15th Jan - 13th Feb segment and apportion them to the correct months.
I have the start & end dates of the calender months in cells A4:B18 and each time a new report is run (ie 15th Jan or 13th Feb, these dates go across the top i.e. cell C3 = 15th jan & D3 = 13th Feb.
I would like to return a % in cell C4 which relates to the amount of total days in the segment that relate to Jan (ie. 29 days in the segment, 16 relate to Jan so 55.2%).
Cell C5 would then return a % which relates to the amount of total days in the segment that relate to Feb (29 days in the segment, 13 relate to Feb so 44.8%).
Cells D4&D5 would return the next reporting segment and how many days in Jan/Feb respectively (the answer will be 0 but a constant formula acrosss all would be perfect. tried to give as much info as poss.
I wondering if it's possible to create a code to have a popup where the user can enter a date in mm/dd/yyyy format and then all rows containing that date will be deleted.
I have a spreadsheet where raw data is entered ("RAW_DATA") for each month it is collected. There are 7 questions that are tallied and each of those responses are transfered to a separate data table for analysis (7 individual tabs within the spreadsheet). I'm currently manually data entering the values from the raw data tab to the other seven tabs.
I would like to have VBA code that could transfer the data from one month ("RAW_DATA") onto the other 7 tabs based on the date and facility identified in the raw data tab. I have not attempted the VBA since I do not know where to start with searching on two variables.
I have tracker, where Cells in Column F have dates or are blank.
I am trying to run a macro to delete all rows when the following criteria apply:
for all cells in column F, if date < 1-Oct-2013 then entire row should be deleted if cell is blank - nothing should happen This is what I got so far - but it is not working...I have entred the date "10/1/2013" in cell AA2 but macro should always check against that date (not variable) so it might not be needed.
Sub PART3_Delete_old_team_members() Columns("F:F").Select Selection.NumberFormat = "m/d/yy;@" Dim endrow As Integer On Error Resume Next endrow = Sheets("Global Team List").Range("F900").End(xlUp).Row Searchdate = "AA2"
I would like a formula that will take the info from 2 cells (not adjacent to each other or in the same row) and then look these up in a table giving the answer in the 3rd column somewhere else on the worksheet.