Making A Chart From Data On A UserForm
Jul 26, 2006
I'm trying to make a chart (which will also be on the UserForm) from data that a user will enter onto a UserForm. The problem is that I am trying to select a data range as one of the charts 'series' but I can't quite find the right code. At the moment it looks like this:
ActiveChart.SeriesCollection(1).Values = Range(BMIM20Ttl, BMIM2025Ttl, BMIM2530Ttl, BMIM3040Ttl, BMIM40Ttl)
ActiveChart.SeriesCollection(1).Name = " Total"
ActiveChart.SeriesCollection(2).Values = Range(BMIM2075, BMIM202575, ...
The problem is with the Range function.
View 9 Replies
ADVERTISEMENT
Jun 30, 2008
I have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
View 9 Replies
View Related
Sep 6, 2006
I have a chart that shows up to a list of 28 people and the number of sales for that day. I'm try to make the chart only show the names and number of salesperson that are not = to null. This is what the chart has for values right now "=' Nest Average'!$C$6:$C$33". How can I make it so that it only shows those cells if not = to null.
View 2 Replies
View Related
Aug 13, 2002
I would like to make a graph with an x, y and z axis. All of the choices that excel gives me are only x,y graphs. How can I plot a 3-axis graph?
View 9 Replies
View Related
Jun 1, 2009
Im trying to create a bar chart that contains required hours per week with a line of hours worked going across the bars, im struggling to make this work and have basically no experience of making any sort of charts or graphs.
I need to create this using vba but to begin with I cant even make the chart manually! Where its all going wrong is the column line for required hours is so thin it looks rubbish. Its a bar chart then I formatted the series of total hours to be a line chart.
View 9 Replies
View Related
Jun 28, 2006
I want to make a chart in Excel similar to a Stacked Horizontal Bar Chart, except I want to be able to have spaces in between the bars of each row. I want to be able to have the separate bars represent spans of time, and I don't want them all to have to necessarily connect to one another. I tried the Floating Bar Chart under the Custom Types tab, but that doesn't let me have more than one bar per line (as far as I can tell).
View 2 Replies
View Related
Jun 6, 2012
I am looking for a quick way to create a number charts using data from multiple sheets.
I have 12 sheets Apr - Mar that contain data in identical format. I also have sheets 12 sheets Apr Charts - Mar Charts, I need to create a number of charts on each sheet for the relevant month. To avoid having to create a ridiculous number of charts, I thought I would try to dynamically change the chart data series based on a value in say cell A1.
For example if cell A1 of the Apr Charts sheet = Apr, the chart will show the data for Apr.
The idea is that I can copy the Apr Charts sheet the required number of times and replace the value in A1, and my charts will update dynamically. I need to have seperate sheets for each of the monthly charts.
View 1 Replies
View Related
May 28, 2014
I am using Access as a backend and Excel as a frontend for my project. Now I have to display a chart in the userform using data from Access database .
View 2 Replies
View Related
May 29, 2009
I track inventory/sales for a very small sole proprietorship. I'm looking to track the number of items that I sell based on the text that I enter in a certain column.
Specifically, I want to have a visual chart/graph to show the percentage of each size/color of an item that I sell, as I sell it. When I enter the words "3T pink" I want the chart/graph/whatever to show another quantity of this category. As I sell a new item, I want the chart to reflect it.
The problem I'm having, is that the graphs/charts require two data sets, but I want the graph to calculate it for me! All I want to do is enter the text for specific items, and when the text occurs subsequent times, I want this reflected in the graph/chart.
It seems so much more simple in my head....basically I want a dynamic chart, not based on a static data set.
View 9 Replies
View Related
Jan 10, 2014
I am trying to make the contents of a cell into a chart title.I know I can do it like this...
ActiveChart.ChartTitle.Select
Selection.Caption = "=tab_name!R2C1"
However, I am trying to use the same macro on several different tabs in the same EXCEL worksheet. Obviously, I can't have the tab name in the macro. But, I don't get a title at all when I try to remove it like this...
ActiveChart.ChartTitle.Select
Selection.Caption = "=R2C1"
or
ActiveChart.ChartTitle.Select
Selection.Caption = "=A2"
Is this possible? I am (kinda new at) using EXCEL2010.
View 3 Replies
View Related
May 21, 2012
I have a userform where I key in something into a textbox, click search and then the results will be returned into the textbox or into a listview if there are more than one instances.
Now, when I type in "Box1-A( )", the only result that will be returned is "Box1-A( )" if it is present in my spreadsheet. Is there a way I can make the userform return results as long as the keywords are there? In this case, the keywords would be "Box1-A" (without the ( ) at the back).
Here is the code I'm using
Code:
Private Sub cmbFind_Click()
Dim LR As Long
Dim strFind As String 'what to find
[Code]...
Was working on this code on another excel forum but I forgot my password and I can't retrieve it at the moment.
View 8 Replies
View Related
Jul 4, 2014
I added an attachment with an example. You will see a matrix, with in the most left column an ID, then the headers of the matrix has different numbers that mean something.
What I want to do is, you fill in a number in the combobox, then press on a button and a report will be made on a new worksheet. With a list of the numbers and dates in the matrix that the ID has. Like shown in the example sheet in the workbook.
View 1 Replies
View Related
Feb 23, 2010
I've been using the function =vlookup(...) to fill up the cells in my spreadsheet. However, a problem I've come across is that vlookup does not make the values in the cell permanent and keeps drawing whatever value is found in the corresponding cells it searches. Thus if the file it draws it's info from goes missing or is edited, my data also changes accordingly. Therefore I would like to ask if there was a way in which I can make the data permanent in my spreadsheet.
View 2 Replies
View Related
Jan 14, 2014
I need to plot various data on top of stock charts.
This data could be irregular in date: it could be weekly, or simply random.
To plot this data by itself requires a Scatter Chart.
From what I know so far, you CANNOT DO THIS.
However, I suspect this could be done if I build a Stock Chart from scratch using a Scatter Chart.
Error bars can be used to make the tails, however, I don't know how they built the body bar which has the characteristics of a bar (border, and interior.)
But since I don't really need those two characteristics, I just need a wider error bar line that is provided in the chart edit window. I'm guess through a macro, there are wider line widths assignable.
View 5 Replies
View Related
Nov 27, 2011
I am looking for a creative way to display a pie chart within a data point marker of a line chart.
My database has 3 value columns, Type1, Type2 and the Total (Type1 + Type2)
these are recorded per day (Date, in Column A)
I have a line chart that displays the total by date, but I want to find a way to display the percentage split of a particular day by type.
I was thinking to load the chart image into the Data point marker, but i don't think that is the best way as the data is updated daily and I would have to do it each day for a few line charts.
The other way I was thinking about was to have a generic Pie chat in the Line chart (Maybe in a corner) and the pie would update depending on way date series was selected or Mouseover'd)
the way that I am approaching it at the movement (Not the best way and by far not the coolest way. Is to have a list of all the dates in a column next to the Line chart and using some VBA, what ever date is selected in the column the pie chart displays the corresponding data. But eh challenge is that when there is alot of dates, I am going to be scrolling up and down.
I am using Excel 2010, but I cant not use the slicer's as the other users do not have 2010, they have 2007.
View 1 Replies
View Related
Dec 29, 2011
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
View 1 Replies
View Related
Oct 18, 2007
I was wondering if someone could give me some sample code on how I can get a chart to appear on a userform. What I have is a userform that allows the users to change the inputs that are used in preparing the chart. Then I want a second userform to display the new chart.
I searched the posts and saw reference to saving it as a picture but I am not sure how to go about this. Can I save it as a picture within the excel file? Or does it have to be external. If so, how is this done. And can I do it without interupting what the user is doing on the forms.
View 7 Replies
View Related
May 17, 2014
I'm trying to use the below code to insert a chart into a userfom, i'm using a tutorial that I've seen used on a few sites.
So far I found this code on the internet, the chart is the worksheet PMC
Set CurrentChart = Sheets("PMC").ChartObject("PMC").Chart
Fname = ThisWorkbook.Path & " emp.gif"
CurrentChart.Export Filename:=Fname, FilterName:="GIF"
Dashboard.Image1.Picture = LoadPicture(Fname)
Trying to load the chart into the image control image1 on the dashboard userform.
The debugger keeps hitting the chartobject section and grinding to a halt.
I have seen other ways of doign this but they require access to different libraries and work is restrictive with these things!
Also I have tried:
Set CurrentChart = Sheets("PMC").ChartObject(1).Chart
Fname = ThisWorkbook.Path & " emp.gif"
CurrentChart.Export Filename:=Fname, FilterName:="GIF"
Dashboard.Image1.Picture = LoadPicture(Fname)
Also the error message i get is: Unable to get the chart objects property of the chart class
View 2 Replies
View Related
Nov 20, 2006
I'm trying to display a graph I've created in a worksheet, in a userform. But it won't work ..
Private Sub UserForm_Initialize()
Sheets("graphraw1").Select
image1 = ActiveChart.ChartArea.Select
End Sub
View 9 Replies
View Related
Jul 1, 2014
I have a big system of data, me not knowing better i have it such that the categories is listed in the start of the row, and new data for periods are listed in the columns following. when i mark the data and click table, it puts the scroll down thing on top of the columns, which is of no use to me at all, i need them at the start of the row. is this possible, or do i need to reorganize all the data, and VBA code used to sort and collect it ?
View 7 Replies
View Related
Aug 7, 2014
I want to take some data which is dynamic and make it static elsewhere in a workbook without doing a manual copy of the said data. Is this even possible?
For example, let's say Sheet1!A1 is the dynamic data I am using, and on Sheet2!A1 I want to replicate this data, I know I can just reference Sheet1!A1. However, this would make Sheet2!A1 dynamic, and I want it to be static. I know I can do this be just typing it in manually but I have a lot of data I would need to do this for, is there some way of making Sheet2!A2 static whilst still referencing Sheet1!A1?
View 2 Replies
View Related
May 14, 2014
In it I have a list of different profiles (From autocad Civil 3D). With a column for the station value, and a column with the elevation. These profiles are arranged all below each other. In the example xls, I've limited it to 2 example profiles to make it a bit clear. The 1st few columns come from the export out of Civil 3D (with empty rows between them, but these are easy to delete). For each station of the profile, you have an elevation
What I need to do is calculate a 3D length for each profile. So manually you can do this with A=(B2+C2)^1/2, and then make a sum. Which is not really a problem if you have a list with 2 profiles. But sometimes we have a list with 100 profiles.
Optionally, it would also be handy that we then get a list in another sheet, with in 1 column the profile names, and next to it the 3D length.
My main question is: Is this possible with VBA? (I would assume it is..) Next, it would be handy if I could be directed in the right direction to produce these routines, because I don't have that many experience in vba.
View 3 Replies
View Related
Mar 26, 2009
I am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
View 4 Replies
View Related
Nov 10, 2008
1. Is it possible for this hyperlink box to only be displayed when ALL the questions have been answered? i.e. All drop down boxes have been used?
2. Is it possible for the result (along with their individual names and scores) to be saved on another sheet? This of course would be supplemental (i.e. When the next person finishes the test, their name would be next on the summary etc.)? I would then have a whole list of who had taken the test...when...and what their score was!
3. Finally, and I know I'm pushing my luck, but is it possible for this summary sheet of names and scores to be hidden?
View 9 Replies
View Related
Mar 6, 2010
I want to take data from an Excel 2003 Worksheet as shown below:...
View 9 Replies
View Related
Jul 14, 2006
I have made a simple procedure (which will extend to make something that I have to make but for time being) it asks user to select a chart type in a userform using option buttons and then the chosen chart type is taken as the chart type and makes the chart.
problem is that the typechart - variable to identify the chosen chart type - is not being recognised. Here's the coding, the variable is not passed (in yellow bolded) from one procedure to another?
Private Sub NextButton_Click()
Call ShowType
If bFlag = False Then
MsgBox "Not Selected"
Call ShowType
Else
Call MakeChart
End If
End Sub
View 5 Replies
View Related
Oct 15, 2007
I have a data validation list in cell D11 on sheet "Data Entry" and a command button "btnMultipleProperties" that I only want visible if "Multiple" is selected in "D11" I have the below code in "This Workbook" in VBE but it doesn't work. What did I miss?
Private Sub Worksheet_Change(ByVal Target As Range)
With Sheets("Data Entry")
If [D11].Value "Multiple" Then
btnMultipleProperties.Visible = False
Else: btnMultipleProperties.Visible = True
End If
End With
End Sub
View 8 Replies
View Related
Apr 15, 2014
I want to add a user-form on a chart, which will have check-boxes that will allow me to select series(lines) that I want see and compare in a chart. Currently my line chart has 24 series (Lines) which makes the chart very difficult to view and looks very busy. How do I add list of check-boxes that will allow me to select one or multiple lines that I want to see at a time?
View 2 Replies
View Related
Jul 16, 2012
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click()
unloadme
End Sub
Private Sub CommandButtonOK_Click()
With Workbooks("RETS results version 2.xlsm")
[Code] ......
View 1 Replies
View Related
Nov 1, 2006
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
View 3 Replies
View Related
