Matching Cells Across Sheets And Returning Color Value Based On The Sheet?
Dec 24, 2013
I have a set of sheets on a workbook that contain addresses, which are all combined on the first sheet (as you can see in the attached file). I would like to use a formula to compare the addresses on the Main sheet with the other sheets, then return in the D column of Main a colored cell indicating on which sheet the address was found on; different colors for different sheets. I tried to figure out some conditional formatting, but to no avail. Also, on occasion I have spreadsheets with 5 or 6 sheets containing these mixed addresses. Is there a solution that won't be limited to just a few sheets for comparison?
Excel Help.xlsx
View 8 Replies
ADVERTISEMENT
Apr 25, 2007
I am having a bit of a problem writing a formula that works under the specific conditions that I need.
I have a range of 6 cells, A1:A6 which contain text
I have formatting that turns that row red based on specific conditions. The problem is that if A1:A6 is red, I then need the text in those cells to be copied to Sheet 2 B1:B6.
View 9 Replies
View Related
Feb 20, 2008
I am making a new stock card system to keep track of stock at work for a new storeman working in my department. What I want to be able to do it hide/show sheets bases on their colour, the reason I want to do this is because I want the new storeman to be able colour code products and only show certain ones at any one time to stop him from having to sort through loads of sheets, but also for him to be able to add extra sheets and asign them a colour and not need me to modify code and put it into category X So in summary, I want code that will hide all sheets that colour is red or blue etc and not need updating when new sheets are added.
View 4 Replies
View Related
Mar 29, 2012
I have in my 'Daily' sheet I9 which needs a formula to look at the date in C9 and the scan range 'Weeks' F6:AN41 and find the cell with the matching date and then whatever text is in Row 2 of the column the date was in will be returned.
View 2 Replies
View Related
Feb 25, 2010
I have an Excel spreadsheet (XP - 2007) listing Job Nos. in the first column, with several columns of Station assignments and dates.
Both planned dates and actual dates are included, adjacent to each other. The dates are not necessarily in a straight ascending or descending order. Separate arrays exist for: Plan Nametags, Actual Nametags, Plan Dates, Actual Dates.
Example:
Job No.Sta1 PlanSta1 ActSta2 PlanSta2 ActSta3 PlanSta3 Act1A10001-Feb-101-Feb-106-Feb-106-Feb-101-Mar-101A100116-Feb-1016-Feb-1019-Feb-1022-Feb-105-Mar-101A100225-Feb-1025-Feb-102-Mar-104-Mar-1010-Mar-10@
@
I need to capture two pieces of information for each Job No. on a daily basis:
1- The 'Planned' Station for the build, based on a match of the 'Plan' date fields to a pre-populated 'Report Date'.
I've been able to do this (using INDEX-MATCH function).
2- The 'Actual' Station location for the build, based on the Maximum 'Actual' date entry in the row for each build.
(In the example above, Job# 1A1001 would have an 'Actual' location of 'Sta2 Act'...)
I need to figure out how to accomplish step (2) above. I've made several attempts with INDEX-MATCH and LOOKUP functions, without success.
View 10 Replies
View Related
May 11, 2009
I want to change the fill color of all cells on my sheet, based on the value of one specific cell. In my sheet, I am using cell F1 as the trigger for the change. If the word Blue is in the cell, I want the background color of all cells to be Blue. Likewise for Red and Yellow as well. I don't believe conditional formatting can get this done, as all but the one cell (for this) will be empty.
View 2 Replies
View Related
Jan 6, 2014
I am trying to create a formula that will change the cell color in a range of cells in the row. I want the color to change based on the information in a particular cell appearing on a different sheet. What sheet the information is on determines the color the cells change to.
Example: I have 4 sheets I am working with. We will call them A; B; C; and D. I would like the color of cells A5-I5 on sheet D to change to red when the information in cell A5 from Sheet D shows up in any cell in column A on sheet A. If the information from cell A5 sheet D appears in any cell in column A from Sheet B then the color will be yellow, etc.
View 6 Replies
View Related
Mar 20, 2008
Im trying count cells based on the cells color. My sheet has multiple blocks filled with different colors. I have searched all of the regular sites out there for vb code related functions, but I can find one that will let me select a range of colors and a range of cells to be counted.
View 2 Replies
View Related
Oct 21, 2009
On sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
The code for the input form is as follows;
View 14 Replies
View Related
Feb 10, 2014
I have two sheets with a Unique ID that I'd like to match and generate a third sheet. The third sheet would consist of First Name, Last Name, ID number where the phone numbers match from between sheets.
Sheet 1: A = Fname, B = Lname, C = Phone
Sheet 2: A = message, B = Phone
I'd like to make a Sheet 3: A = Fname, B= Lname, C = Phone, D = Message
Is my only option to try and get on a PC and use MS Access? Never had to do this in Excel before.
View 1 Replies
View Related
Jan 17, 2014
I'm not sure if this is best handled in the Formulas & Functions section or elsewhere, but this is my best guess. I have a spreadsheet used for tracking hardware issues with data in two worksheets:
1. PageCount
Column 1: Date
Column 2: Serial#
Column 3: PageCount
2. Tickets
Column 1: Date
Column 2: Serial#
Column 3: TicketNumber
What I'm trying to do is find a way to extract from those two sheets the date, serial number, page count, and ticket number where the date / serial # are the same and dump this to a new sheet. I've thought that I may need to concatenate the date / serial number together into a single cell or something, but I'm really at a loss as to how to pull this data. Part of me thinks this should be done in SQL, not a spreadsheet, but that's how our reports are produced.
View 1 Replies
View Related
Jun 26, 2013
Via conditional formatting, I am searching to change the color of a specific word in a cell (not the color of everything in the cell, but only that specific word - and the word repeats in the cell). A function such as =isnumber(search("NOK";A1)) colors all the cell values, which I do not want to do. How i can perform this task?
View 1 Replies
View Related
Feb 1, 2014
I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
View 8 Replies
View Related
Jul 10, 2014
is it possible to provide a formula to match as per the uploaded file. Data in Sheet one columns A and B, compared to what is in Sheet two column A I have a lot of data, and only need a Y for yes, and N for No as a result.
View 3 Replies
View Related
Oct 27, 2009
I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.
After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.
I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.
View 9 Replies
View Related
Nov 18, 2007
I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
View 5 Replies
View Related
Jun 18, 2008
I have a spreadsheet that i download from the net daily, which is seperated into columns of information.
I want to be able to look down a column and mark a cell in a seperate column if the cell font text is red.
For example looking down column A ... if the font text of a1 is red then mark the cell background colour of T1 red - if a2 text colour is red then mark the cell T2 red .... etc etc.
If the font colour in a1 or a2 ... etc etc is any other colour then do nothing.
I have 5 columns I wish to look down and mark in 5 seperate columns - I have tried to do this by conditional formating but don't know the fomula for checking font colour.
View 9 Replies
View Related
Dec 11, 2013
Following Excel task I am trying to complete:
I have an Excel file with multiple sheets and I want to find and replace matching cell data on the same row across all of the sheets. For example, I have two columns, Column A and Column C and 10 sheets. I want to only replace the content in Column A if text matches both Column A and Column C on the same row. So, I want to be able to search for the following data across all sheets:
Column A = "car"
Column C = "yellow"
If both "car" and "yellow" are found in Column A and Column C on the same row, then replace "car" in Column A with "truck".
Is there a way to do this automatically as I have few hundred to find and replace?
View 5 Replies
View Related
Jul 9, 2007
Is there a way to exclude sheets from index based on tab color
View 2 Replies
View Related
Mar 28, 2012
I m trying to match the values based on the Coulumn B
[IMG][URL]....
;base64,iVBORw0KGgoAAAANSUhEUgAABVYAAALYCAIAAAAYRj5jAAAgAElEQVR4nMy9Z1RU+Z73Oy/uWs9aM
/eZmTtzn5nT3doGoNLOu3KmCEXOQUURUcCAomIgmXOgDYCK5JyhcoQiQ5HNWcE2dNt9uo8dTve
ZM3PCfbF3RYJo95m5rs+qVb0bpMoO8P3s7+/3/zvrwYOL5cCB4dnk5bmTm2tnKCeHYDAnZzA7m2AgK2tg
/347/fv29e/b1793bx
[Code]...
View 3 Replies
View Related
May 23, 2014
I am trying to build a staff roster. The staff rotate over a 4 week cycle. the name of the staff member, and their shift needs to be looked up from the key then matched with the particular week. the name and shift then need to populate specific cells.
I have attached the worksheet so you can see what i am trying to achieve.
View 2 Replies
View Related
Jun 13, 2013
I am trying to move info from an unformatted sheet to a sheet ready to import into a program. I need to look at the source sheet and if a column heading matches the heading on the destination sheet I need it to move the entire column to the destination sheet.
View 3 Replies
View Related
Jul 1, 2008
I am working on a spreadsheet for a shoe company. I have separate columns for the size, model, color, and item number of a shoe. I get everything except for the item number from a written document; I then have to find the item number for the shoe from another excell document called the Master List.
I was hoping there would be a way to have Excell auto-fill the item number for me. For example, if a shoe is a Red, Athens (the shoe model),size 12, its item number (which can be a pain to find) listed in the row of the Master List is aaabbb. So I want to just enter in the size, color and model number, and have Excell find the item number for me, and fill it in.
I have enclosed an example. Sheet 1 is the sheet I would be working on. Sheet 2 is a portion of the Item master list, which is actually 50k lines.
View 8 Replies
View Related
May 22, 2013
I need to return the specific text of a cell based upon the text in multiple cells.
Worksheet as follows:
Asphalt Sub:
BLDG1-Backwash 1
*BLDG1*
*Sub*
BLDG1-Backwash 1 OverEx
*BLDG2*
*Sub*
[Code].....
I have three columns thus far. I need to add another column and search all items in Column A using the criteria in Columns B and C. For instance I need to search for BLDG1-Backwash Sub: and place it into column D using the criteria in Columns B and C.
If possible, I would also like to remove both the words, BLDG1 and Sub from the result so then it only shows "Backwash".
My spreadsheet is much larger than this and I have muliple buildings I am dealing with, sometimes 30-40.
View 4 Replies
View Related
Jun 29, 2006
I have two columns with the same data just totally different orders the third column (associated with the second) has data that I want to sort. I want to keep the order of the first, rearange the second so they match, and have the 3rd column follow the second to the proper location. i need to keep the order of column 1 so i can post into a massive spreadsheet. Theres gotta be a quick formula for this i just have no clue
View 2 Replies
View Related
Feb 22, 2013
I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.
What VBA functions to use???
View 4 Replies
View Related
May 12, 2014
In the attached example I paste in a report from another system into Sheet2 (rough data layout in example).
In column B in Sheet1 I have tried using Match and Index formulas to try and return only the Local Shipment figures from on Sheet2 for each staff member.
The issue i'm having is that the data in Sheet2 can change based on how long the report is run. There is also no way I can change the way the raw data is set out in Sheet2 as it's an external system.
Basically i'm looking for a formula that isn't locked down to certain cells and can work with data moving up and down columns at different stages. The key data never changes from column A and F in sheet2. But what does change is whether each person has one or both of Sales & Local Shipment data in the reporting. This obviously changes based on what is completed each day.
So I need a formula that matches the persons name in column A in Sheet1 with Column A in Sheet2, then looks for the first mention of 'Local Shipment' below it and returns the cloumn F value which is in the same row as 'Local Shipment'.
View 3 Replies
View Related
May 7, 2012
I have an application that on the "Main" sheet, is to extract two numbers then search for them on my "Listpoint" sheet and finally return the text to the right of the search data (e.g. K3)
Working left to right - the user pastes upto 12 lines of code into C3-C22. Formula in E3 extracts object Nos. Formula in K3 substitutes "first" number if it is a zero (with number from A3).
Left to do - Uses data (H3) to search Listpoint sheet colums C and B for a match. then returns text from Column S.
Note Listpoint has 1000 rows to search.
Main
ABCDEFGHIJKL1 2Osn Number Prog Point Text Extracted
ObJNos Zero replaced Name of Object 1 38 10 IF POINT 0|199 ON OR POINT 8|191
ON THEN RETURN FALSE 0 1998 191 8 1998 191
Example found Text 4 20 IF POINT 0|106 OFF THEN RETURN FALSE "HOLD OFF"
[Code] ............
View 9 Replies
View Related
Apr 20, 2006
I have run across a problem that I am unable to solve with a combination of index, match and countif funtions. What I am trying to do is have the formula return disctinct symbols. I have a list of currencies on one sheet: audusd, eurusd, usdcad etc, more than one from each. Id like to return one from each onto another sheet...
View 9 Replies
View Related
Jul 15, 2014
I am trying to copy a row based on the value of a cell.
I have two sheets in my workbook and on sheet 1, I have a part number and a description. On sheet 2, I have part numbers again, but this time I the description is broken up into the format I need.
What I am trying to do is have excel search on sheet 2 for the part numbers, then copy the information that corresponds to the part number into the correct column.
I have tried using Vlookup. But if the part number in row 2 on sheet 1 match the one in row 8 on sheet 2, this will copy over the data from row 2 whereas I need row 8.
If this would be more doable using VBA, that is fine by me. I haven't been able to figure out anything in VBA or in excel formulas up to this point.
View 7 Replies
View Related
