How do I set a worksheet to monitor H29 to run a macro whenever H29 changes?
I found [URL] but I'm having trouble getting it to work right
I cant figure out the errors im getting enough to correct them.
I have a spreadsheet control inside of a userform. I can generally access this spreadsheet and do what I need to do with it. My problem is that I need to monitor it for the cell change event. I normally accomplish this with:
View 4 Replies View RelatedI have this code that works well for the entire column, but, I only need to monitor every other cell in the columns. the cells I want to monitor are:
B10, 12, 14...B96. the columns to be monitored are B,F,J,N,R. the column part is good. I don't want the pop up box to appear when I change B9, B11, B13 etc...
i have a userform which displays a textbox which shows a variance in price terms based on a sheet which has live data via dde.
I would like to turn this userform into some kind of floating monitor if possible. At the moment - once you fire up the userform - the price in the textbox is fixed and does not change with the cell which fills the textbox on the userform. The only way is if you close the userform and re-open - then you will see the current price. I would like to keep this userform floating so that you can still select other cells on the sheet.
Is this possible?
Private Sub CommandButton1_Click()
Unload Me
End Sub
Private Sub UserForm_Click()
End Sub
Private Sub UserForm_Initialize()
With ThisWorkbook.Sheets("price").Range(ActiveCell.Address)
If .Value = "" Then
Range("D31").Select
Me.TextBox1.Value = "No Trade Selected"...................
Below is code. However, I need this to happen for multiple cells.
The cells that I need to monitor are B10, B12, B14.... through B96 and F, J, N, R columns for the same rows. The input values will be stored in cells AM10, AM12, AM14 .... through 96 for the B column results. Then for F, J, N, R will be AQ, AU, AY and BC respectively.
Additionally, when B10 has an input, and the user input box displays for the number of hours, there is a cancel button available, but it does not work. How can I exit the loop and clear contents of B10 if the "Cancel" button is clicked in the dialogue box.
[Code] .....
when I run code attached to a User Form, the user form will leave trails (similar to what you see when you win at the Microsoft Solitaire game) when you drag it around with the mouse.
I haven't been able to figure out why this is. Some of my code runs and allows me to reposition my form without issue. Other times, I get these 'form trails' that obscure what's behind the form.
I want a macro in one worksheet to run when any cell (in a given range)on a different worksheet (dataentry) is updated. I have spent along time trying to make it work with no avail. The code I use to start my macro is as follows.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count <> 1 Then Exit Sub
If Target(1, 1).Address = "dataentry!H5:IV72" Then
If Not Intersect(Target(1, 1), Range("dataentry!H5:IV72")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
I know what i need to do to get it to open the file I want. I dont know how I set the position of a file that i am opening. In this case a .pdf file.
I have searched and came up with a lot of info for userforms, but I am not working with a userform in this case.
To monitor fast moving decimal values in the even numbered cells( e.g. F2 to F 30 ) of a column, ignoring blank cells, and if two of cells values simultaneously fall below a certain value e.g. 2.04 True if not False.
I'm trying to find a way to create an excel sheet for my company. It will be used to import into our CMDB. Its for computers(ID) and their monitors(LINKED TO)
We have made 3 rows: ID, CHECK and LINKED TO which consist of the ID's of each computer and the attached monitor. The CHECK row is where we put the word "OK" if that computer is physically present at that location. After this list was made, we decided NOT to link the monitors to the computers, so afterwards we will delete the row LINKED TO.
What i need to do now, in order to not have to seek every monitor manually, is to have a formula which looks up an id (i.e. WBE01111) in the LINKED TO row, and if that one exists in the ID row, it will place the word "OK" in the CHECK row.
Example: (with WBE01111 being a monitor attached to computer WBE03333)
[ID]_____________[CHECK]______[LINKED TO]
WBE03333________ OK _________WBE01111
WBE09999________ OK ________ WBE08888
WBE01111________(**)_________
**=formula must put OK here
So the WBE01111(monitor) below [LINKED TO] exists in the [ID] row, i want the formula to see that, and put OK below [CHECK] for WBE01111
I need a macro that I will be using for a workbook that has many workseets. I need to save a worksheet "Test1" and save to a path found on worksheet "Test2" cell A1 and make the file name the value of "Test2" cell A2.
View 9 Replies View RelatedI have designed a workbook for a reservation planner which lists all production reservations over the whole year. Because of the limitations in columns, I have had to split up the workbook into 3 worksheets. I have a quick links section (52 command buttons) which redirects the user via macro to the specific week they require....
Sub Week12()
Application.Goto Reference:="R6C256"
Application.Goto Reference:="R6C118"
End Sub
The first split is at week 17 which is on sheet2. I am working far too hard at the moment and I cannot figure how to go to the sheet in addition to the cell references as above.
I'm having some problems with trying to reference cells on another sheet with VBA.
I've tried using both of the following but i am getting an error. I get object doesnt support this object or method when I do "'Master List'!" or type mismatch when I use Sheet1.Range($$:$$) I'm new to vba, sorry if this is a dumb question
With Target
Cells(Target.Row, 33).Formaula = "= SUMIF('Master List'!B3:B190" & ",A" & .Row & "," & Sheet1.Range("AR3:AR190") & ")"
End With
I am working on this project that involves opening several Excel spreadsheets and copying the data into a new workbook. The problem is that the names of the various worksheets I want to copy change every day - it always reflects the date. I open 7 workbooks, go to the sheet named (for example)01.17.07, copy a static range and then paste it to a new workbook.
Is it possible to record a macro and use a cell reference in the destination workbook (the one I want to copy to) to tell it which worksheet to copy? So, for example, I would type 01.17.07 in cell A1 of the new workbook and the macro would look for the sheet named 01.17.07 when running? Then tomorrow, I could type 01.18.07 and it would know to look for a different sheet?
I have one excel file having two sheets viz "DailyRecd" and "MasterList". I need to copy some cell value from "Daily Recd" sheet to "MasterList" sheet using macro-function. A sample Excel file attached for easy reference.
View 2 Replies View RelatedIs it possible to write a macro that will rename a worksheet based on the value of the cell?
For instance, if cell a1 has the value Test, the worksheet should be named Test. If I change the value of the cell to say Test 1, the worksheet should automatically rename itself to Test 1.
I've got 3 sheets, A, B, and C. In sheet C, I have a cell named "element". That cell can have either the letter A or the letter B in it. In my VB code, I want to reference the sheet which correlates with the "element" cell. So,
Worksheets("element").Select
when the user clicks my "go" button, it calls this logic, and I want the worksheet that correleates to the letter in the cell in worksheet C - to open.
The reason for my posting - this is not working, and may not even be possible. Perhaps someone has experience in this and knows how to do it - or knows a different way to do this.
I would like to create a macro/vb code that will unhide a worksheet if cell value is greater than zero, or hide the worksheet if the cell value is zero.
I'm not too familiar with VB code and was wondering if this is possible? I have my doubts, since it means that the code must constantly be running in an endless loop, checking to see if the value has changed?
I have 2 worksheets. Sheet1 has a list of data (Range = "ClosedOpps"); Sheet2 has a Region dropdown list with Domestic and International as choices. What I would like to happen is when I pick a value in the dropdown list, ClosedOpps list filters by that value. Region is the 5th column in Sheet1.
View 1 Replies View RelatedI am trying to modify the macro listed below for the following example. It would work when I have only numerals in the cell but this new query, the cell has both letters and numbers.
I want to compare column "M" from worksheet one to column "B" in worksheet two. If the information matches, then copy the value adjacent from worksheet two column "A" to worksheet one column "L".
Here is the macro that worked for me using a search of only numerals.
figuring out why the data doesn't copy?
Macro:
Sub merge_accession_PS_rad_productivity()
Dim rng2 As Range, c2 As Range, cfind As Range
Dim x, y
With Worksheets("Imaging_Summary")
'N4=Accession on Imaging Summary worksheet
[Code]....
have seen macros that create a seperate sheet & save by tab number etc, & wonder if its possible to save each sheet in a workbook as the value defined in each sheets cell A2. is there a vb macro available to do that ? if so where ?
View 9 Replies View RelatedI have a worksheet named "ABC". In row 4 of this worksheet, each cell from G to BG is numbered from 1 onwards and each cell has a unique number. I would like to have a macro ask the user through a pop-up question box which column data should be calculated in. For example, if the user types "1" in the question box, the macro will go to column G which has "1" in cell G4 and will select G5 the cell just below the column the user defined and calculate the formula.
View 6 Replies View RelatedThis is a continuation of thread 182629 [URL] ....
The End User wanted originally to type characters into cell C1 of a worksheet that the macro searched for in another worksheet, copying across every row containing the input.
The responses gave me the following code which worked perfectly:
VB:
With Sheets("PICKLIST")
myFind = "*" & .[c1].Value & "*"
End With
If myFind = "*" & "" & "*" Then Exit Sub
Unfortunately, the user NOW wants a Text Box instead of putting the characters into a cell.
I added a textbox (originally called 'TextBox2' but renamed "Choice") and "Dimed" CHOICE As Range.
Then tried the following code:
VB:
With Sheets("PICKLIST")
myFind = "*" & CHOICE & "*"
End With
But it generates a "RunTime Error 91" - Object variable or With block variable not set.
Dropbox - Final.xlsm
Here is the above link. Am looking at a button which saves whatever is the temp worksheet row in the customers worksheet. The temp worksheet basically takes the data from the Quotations worksheet and places it in a row.
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.
View 5 Replies View RelatedI am maintaining an issues list in excel. File contains two worksheets/tabs: 1) Open Issues & 2)Closed Issues
One of the columns is Status. When an issues is in 'Complete' status, it is removed from Open Issues and added onto the 'Closed Issues' worksheet.
There are many issues closed daily and its quite a manual task to individually delete rows in one sheet and paste them at the end of the last row in the other sheet. Want to have a button/macro that would find any rows that have the cell for the status column w/ value 'Complete', delete it from 'Open Issues' sheet, and append it to the 'Closed Issues' shseet.
ive done basic c++ programing years ago, but know nothing about vba or excel macros.
I have a worksheet in which I have a worksheet_change macro. This worksheet_change macro makes sure that a few cells will keep their colors, even if the user copies and pastes a new value to that cell. This worksheet_change macro runs each time there is a change on the worksheet. Now my problem is that on the same sheet I have an update list macro which updates around 20.000 rows and two columns (which is alltogether around 40.000 values) and it takes a while to run. So.. it takes a loooooooooot of time (too much) when these two macros both run.
My question is that can I somehow disable the worksheet_change macro while the update list macro runs. I mean something like when I start the update list macro to disable worksheet_change macro and when the update list macro finishes, then reenable worksheet_change macro?
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies View Relatedcoding a VBA macro for one of my workbooks, in which I need to be able to hide/unhide various rows in one worksheet depending on the value of a cell in a worksheet elsewhere in the workbook. The rows start off hidden by default.
As a simplified example:
Worksheet1 has a cell that has option "Set 1," and "Set 2." Worksheet2 has two sets of rows (say, 20:30 and 40:50) that need to be hidden/unhidden depending on the cell in Worksheet 1. These are hidden to start with!
So if Worksheet1's target cell says "Set 1", then on Worksheet2, rows 20:30 would stay hidden and rows 40:50 would be revealed, and then if the target cell says "Set 2," then on Worksheet 2, rows 40:50 would then be hidden, but rows 20:30 would then be revealed.
I was thinking of using something like this:
Rows("20:30,40:50").EntireRow.Hidden = True
If Target.Address="'Worksheet1'!A1" Then
If Target.Value = "Set 1" Then
Rows("40:50").EntireRow.Hidden = False
Else
Rows("20:30").EntireRow.Hidden = False
End If
End If
I think this might work, but every time I try to run this I get various errors, like not referencing my target cell correctly.