Copy Certain Info On Many Sheets To One
Nov 25, 2008
I have a workbook with a number of worksheets. (say they are called A, B, C, D). Each sheet is exactly the same.
what i would like to do is look down column A in each sheet in turn and where there is a "y", it will copy the entire row of information (say A to J) to my "master" sheet.
i want it only to copy (not delete) the information, but then enter a "y" in row A for all the columns it has copied.
(thereby meaning the next time i run it, it will not copy those rows again.)
View 9 Replies
ADVERTISEMENT
May 12, 2014
I would like to fill in a a form on page /sheet one and have the same info on every sheet that follows is it possible?
View 3 Replies
View Related
May 28, 2009
my macro is set up to do the following in my book once the user inputs a row of information. the user will go to the opproperate sheet based customer and input all info.
the macro is run (ctrl+z)
the macro takes the last row in the active sheet, and pastes it into the last row of the "ALL" sheet. then it goes and sorts the sheet in order.
i want to adjust it so that the user will input the row of information into the last row of in the "ALL" sheet. then based on the given informaiton, paste the same row in both the corresponding customer and location sheets.
im assuming im going to need to use some variables?
attached is the test spreadsheet.
View 9 Replies
View Related
Aug 8, 2008
I have information in range(p10:Q10) on sheet DEMO! that I want to paste the Values only into a Separate sheet "LIST!" in columns(W:X). The row will vary and will be based on the cell: "DEMO!A3" and will match a cell in column A of "List!"
View 9 Replies
View Related
Dec 26, 2013
I'll need to pick up the rates from sheets "SYD" & "BNE" by info from column A of "Summary", which means if the info in column A is "sydney", the formula should pick up the rates from sheet "SYD", if it's "brisbane", the formula should pick up the rates from sheet "BNE".Also, the rate should be matched by the column B,C & D from "summary" page.
View 8 Replies
View Related
Apr 4, 2014
I've started building a macro that loops the sheets and collects the information onto the first worksheet. I've been using Activesheet and activecell references but i'm afraid looping will change these references.
[Code] .....
View 1 Replies
View Related
Jul 29, 2009
I have a "Generate Table of Contents" button that launches a macro. This macro builds the Table of Contents, creates (3) columns (Patient Name, Date of Pickup, and Frequency), finds all of the sheets in the work book (already renamed to a patient's name), sorts them alphabetically, and lists them under the Patient Name column.
This code works great - The next challenge:
On each sheet (which corresponds to a patient in the database), there is a cell that is filled in that states which day the patient picks up their medication. There is another cell that designates how often they come to pick it up.
I am at a loss as to how to direct the macro to: For each sheet, go to the specific cell, and then report it in the table of contents.
It somehow needs to bind the information together... meaning the patient name, date of pickup, and frequency must be displayed correctly each and every time on the same row.
View 4 Replies
View Related
Apr 18, 2013
I am trying to use a macro to move a range of excel tabs to the front of the workbook however some of the tabs could be missing due to no information.
If I simply record the macro by moving them manually if the procedure arrives at one that is missing it would report an error.
So in essence I need it to look for the tab and if its there move and if its not move onto the next until it arrives at the last one.
View 9 Replies
View Related
Jul 23, 2012
My friend has multiple workbooks, each containing data. Each worksheet with have the same number of columns but a variable number of rows
Thinking through, what I deduced the simplest thing to do would be this: Have a macro that would Highlight all the data except the title row in the active workbookSwitch to a different workbook called "Consolidation"On the next free row, paste the information
They can then just activate another workbook and run the macro again
View 9 Replies
View Related
Mar 9, 2013
I want to copy Four Cells of info from one tab to another if the value of a cell is a specific value is this possible?
View 2 Replies
View Related
Jun 24, 2013
I want to copy all the information from a name range from a different workbook and paste it in my activeworkbook , but the trouble that I'm having is that it doesn't copy all the cells of the name range, just the first cell of the name range Here is the command that I'm using, not sure if it's the best approach
Code:
ThisWorkbook.Worksheets("US Input").Range("usInput").Value = Workbooks("US Input File.xlsm").Worksheets("US Input").Range("usInput").Value
Forgot to clarify that the name range is the same for both workbooks
View 2 Replies
View Related
Dec 4, 2013
So i have two sheets with user info and so on, my boss asked me if i can transfer person names from sheet1 to sheet2 but each name must be in correct place acordingly to username column
Capture6.jpgCapture7.PNG
in capture6: in F18 you see 139401arle and G18 is supposed to be his name but it's in other shhet as you can see
in capture7 his name "Ar Sveinung Leira" is in E5
is there any way to transfer names so that they go in right place?
Kopi av Computer List - 02 12 2013.xls
View 4 Replies
View Related
Aug 8, 2014
I need to create a new excel template for work. I was planning to copy a few worksheets from an old workbook over into the new workbook, mostly just for formatting for some graphs/tables that I would then link to the new workbook. A coworker said I cannot do this as copying from an old workbook will bring in "hidden" data that could some way impact the integrity of the new workbook and that the copied/old worksheet would FOREVER be linked to the new workbook no matter what I do. Is this true? If so, are there things I can do to remove any reliance to the old workbook.
View 1 Replies
View Related
Mar 20, 2014
In column A I have Product Codes, They start at A3 and go down to A169.
I need to have a formula which i can drag across from CQ3 to DH3 which corresponds in the following manner.
CQ3 = A4
CR3 = A5
CS3 = A6
etc etc.
I then want to be able to copy the formula into another place, eg CQ20 = A21, CR20 = A22 etc
I have attached a screen shot.
Untitled-1000.jpg
View 3 Replies
View Related
Jun 4, 2009
I have to worksheets, the first is filled out and at the end Ive place a button that I would like to open the second sheet and fill in cells that have duplicate info from the first, so just copy & paste but kind of automated for speed.
I have only got as far as opening the second document with the macro, after that im stuck!
The Info I would like to be copied across from the "service Diary" to the "Service Report" would be As follows:
*CUSTOMER
*CONTACT
*MACHINE TYPE
*SERIAL NUMBER
*QUOTE NUMBER
*ORDER NUMBER
View 14 Replies
View Related
Apr 24, 2013
What the Macro has to do is this.
It takes an specific word from a certain number of files that you can choose from an add file window.
Then when you choose those files the macro starts to run every file and look for an specific word, in this case is "ROFO March 2013".
When it finds it, The macro creates a new workbook( You create the name of that workbook y the first place of the macro, when you choose the files that you want to look for that word).
So, When the macro finds the word ROFO March 2013, it copys all the columns that has that name, and keeps looking until the file ends.
And paste all that info in the new file, A consolidate File.
I have change all the names of variables of the macro so you can understand it.
Code:
Sub copy_data(ByVal Origin_File_route As String, ByVal destiny file As String)
Dim Origin_File As String, RsBusq As Range, ROFO As String
Dim Rango As Range, Fila As Long, lastrow as Long
origin_file = Dir(origin_file_route)
[Code] .......
View 2 Replies
View Related
Apr 17, 2014
I have a table like this:
1/2/14
2345
1/6/14
34665
1/7/14
5473457
For Column A-I would like to create a macro that will copy the info from cell A1 and paste in in A2. This will continue all the way to the last row containing info which will vary. So after the first copy/paste, it well go to A3 and copy paste onto A4, A5 will copy and paste onto A6 etc.
For Column B- The same only it will copy the contents of B2 and paste it on B1, B4 copy/paste to B3 all the way until the last row of data.
View 1 Replies
View Related
Feb 15, 2010
I have a spread sheet with bunch of rows and columns. Columns goes all the way from A ... BB and rows from 1 to 40,000
The main focus is column Y and AC
If there is a value of FALSE found in column Y then macro should go to previous row and copy the value that contains in column AC and then move down to the next row, , where the value FALSE was found and that's in column Y and paste that value in column AC the NUMERIC VALUE
Below is the data ...
View 9 Replies
View Related
May 25, 2014
I have a column of Data (A1:A20584) that includes information for different contacts
BEGIN
VERSION
N
FN
TEL
TEL
EMAIL
ADR
ADR
ORG
END
I need the information to list as Row Titles (horizontally) so I can sort. I hope I am saying this correctly.
View 2 Replies
View Related
Nov 13, 2009
I am comfortable with getting a macro to copy & paste where I need it to, however how to get the macro to recognise when a certain value has stopped.
For example in Column B on "DataDrop" are all the divisions that exist in my company i.e East Anglia, Essex, London etc. There is an empty row between each division.
View 4 Replies
View Related
Jun 17, 2008
My company has an excel file that has our new customer's information (colum A & B are first & last name;Column C is customer email; Colum D is cutomer phone, ect...)
once that information has been entered we have another excel file that will load all of a customer's information, and then be pasted into a welcome letter into MS Word for their confirmation & emailed to them
The problem I'm running into, Is that I do not know how to populate my nex excel sheet with the info I want only from a specific line.
I would like to enter a line / row number (for example '6') and than have excel go to that file & copy/paste the name, phone, email, company name, ect. into my new excel sheet
I have one that works already, but the previous owner PW protected it & hid his formulas/macros, so I'm in a dead end now...
View 9 Replies
View Related
Aug 22, 2014
I have attached a spreadsheet and I am trying to capture the info in lines 2,7,12,17 and return the info into column d,e,f,g
The info in these columns at present has been manually entered but I am sure it could be automated.
OOL Roster Final 18-31Aug14.xlsx
View 1 Replies
View Related
Aug 19, 2009
I have a workbook with a single worksheet that has about 2000 rows, columns A, B, C, D, E & F
Cells in colums A, B, C, E & F all have very different information in them, nothing is similar in any of those columns that I can base a criteria on. Cells in column D however will have 1 of about 18 possibilities in them
What I want to do is have another workbook with 18 worksheets, each worksheet named 1 of the 18 possibilities, and somehow magically pull the data from the first workbook and insert it into the correct worksheet in the second workbook, leaving the data in the first workbook intact.
I update the first workbook several times a day, adding and deleting from it so would need to update as it goes, or be able to run the update as and when needed.
My skills are limited to simple formulas inserted into cells and dragging them down!
View 11 Replies
View Related
May 3, 2007
I have a sheet that users fill out and there is a macro on that sheet to copy the info to another workbook, save and close.
for some reason, the date, which originates from a cell with the value "=Today()", and when pasted in to the new book, it is pasted values.
the issue is, every so often, the date will say 09/26/10 and continue to do so for quite a few entries.
i have tried almost everything. I checked the dates on the computers, and all are fine. i even went through it step by step, and when the data pasted it, it was 09/26/10.
View 9 Replies
View Related
Jun 4, 2014
I have an invoicing spreadsheet, what I want is to have a main working page and then tabs after separated by vendor, but save myself a bunch of manual work in the future.
I want to be able to work in the main tab and the other tabs automatically update with the new info.
So I want the macro to search the text in the first column and if it finds "AIM Land Services Ltd." then I want it to populate the appropriate tab, in this case "AIM", with all the respective information after it ie: A-O. But I dont want it to select any other vendors/ info.
This is what I have:
Sub MoveData()
For Each cell In Range("A1:A1") ' Where to look for the date
If cell.Value = "AIM Land Services Ltd." Then ' The date
Range("A5:O350").Select ' What is the range to copy
Selection.Copy ' Copy it
Sheets("Invoice_Log").Select ' Select the Sheet it applies to
Range("A5").Select ' Where to paste the data
[Code] .........
View 1 Replies
View Related
Aug 29, 2008
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
View 7 Replies
View Related
Feb 26, 2012
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
View 2 Replies
View Related
Jun 24, 2014
I need to do VBA coding. Got 12 Sheets for 12 month of Sales. Every Sheets are in same Header Format.
For Column R (Status), there's Filter Data "TRUE" and "FALSE". I have to move/copy "TRUE" item into Sheet Aging 2014.
I manage to transfer using only one Sheets using Advanced Filter VBA, failed with other Sheet.
I attached the file : Sales 2014.xlsx
View 5 Replies
View Related
Dec 26, 2009
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
View 9 Replies
View Related
Sep 5, 2007
I have copied and then pasted & linked numerous cells from one sheet to another within the same workbook. When I copy the 2 sheets (Edit>Move or Copy Sheet>Create Copy) the linked cells on the duplicates remain linked to the original sheet. How can I copy the 2 sheets and have the cells on the copied sheet be linked to the copied sheets and not the original?
View 4 Replies
View Related
