I have data that I want to move to columns:
-----A
1 Apples
2 Bananas
3 Oranges
4 Watermelon
5 Grapes
6 Kiwi
It should move every two rows to columns, like so:
-----A------------B
1 Apples-------Bananas
2 Oranges -----Watermelon
3 Grapes-------Kiwi
4
Column A is numbered 1 -100 successively Column B thru D contains data that goes with the assigned number in column A. I need to be able to move rows of data in column B through D to a different set of rows all at the same time (not one cell at a time) without disturbing the set numbers in column A. And with that, have all the other rows of data automatically adjust accordingly(not to be deleted or replaced).
View 1 Replies View RelatedI need a way to move every 7 rows into columns.
So rows 1-7 become columns 1-7, rows 8-14 into columns 1-7 etc.
I have a set of data that has a store number in cell A1, the store name in B1 and then the store address in C1, C2, and C3. This pattern repeats for all ~300 stores. I am trying to get all of the store data on one row per store.
I have a set of data that looks like this:
We have to copy from lot of Java webpages
1. Data of single column 3 rows of data to First blank cell in 'C' column (say C6)
2. Then Transpose it across to the same row into 3 columns (from same C6 to d6 & e6)
Here I tried some VBA but needs how to put it across....
So, I have a column with data on rows as follows below. I need to arrange the data below in such a way that I have on first column the company name, second column the contact person and so on depending on what data is found (tel, e-mail, website).
The data is on rows and I have separated each company/group of data with a row between them. There are in total aprox 200 companies/groups of data that I need to arrange as explained above.
I have tried with transpose but I have to manually do it 200 times. I have tried with an indirect formula but the companies/groups of data do no have same amount of info/rows e.g. some lack the phone number or other data.
if there is a method to save the time and not arrange them manually.
Actinote
Contact: Toine Kets
Managing Director
Str. Tache Ionescu 3, Et. 5, Apt. 10
[Code]....
If the row contains a text like ABC in multiple columns in a sheet it has to copy the whole column from that sheet and paste special into another sheet.
View 2 Replies View RelatedI am using Excel 2010 and need a macro that can convert data from rows to columns. I have read several posts about this subject but have no experience with macros and don't know how to change the macros to fit my scenario.
Here is what I currently have:
Account...Vehicle1...Loc1...Vehicle2...Loc2...Vehicle3...Loc3...Vehicle4...Loc4
11111......2008........FL
11111......2000........FL
12121......1999........GA
33222......2000........AL
33222......2011........AL
33222......2001........MS
Here is what I need it to look like:
Account...Vehicle1...Loc1...Vehicle2...Loc2...Vehicle3...Loc3...Vehicle4...Loc4
11111......2008.......FL.......2000........FL
12121......1999.......GA
33222......2000.......AL.......2011........AL......2001.......MS
There are up to 4 vehicles/locations per account number, and I need 1 account number per row (the dots above are for spacing only and not part of the actual data).
I could do this manually but because I have so many rows of data it could take days or weeks. Is there a macro out there that can do this??
I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
View 2 Replies View RelatedI have a worksheet in which I have sorted the data based in date and numbering (column I and E). I would like to create 2 macros for following actions:
1- all rows with the value "TOM" in column C will have to be deleted.
2- all rows with a value of 601 or 602 in column E, will have to be moved to the bottom of the sheet after the last row with data. The rows that have been moved will have to be sorted based in date (column I) and numbering (column E).
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I've got an excel file with over 20,000 rows with Column A being having values of a "Vendor Number" while Column B has a "Vendor Name" Here is an example:
Vendor #Vendor Name
1001ABC Supply
1002Larry, Moe, Curly Inc
1003John Smith
1004Fred, Wilma, Barney LLC
I'd like it to find the rows where the Vendor Name has a comma present, and then put it in another sheet, or in another column like column C and D. If I can't get both the Vendor # and Vendor Name re-inserted someplace, that is OK. The Vendor Name is the big one.
I have 3 columns and 200 rows. The first column is for Name of product. 2nd column for number and 3rd for $value of number of products. Have 200 rows. Have done a sort and checked. 2 sets of rows are for the same product name. I want to know if it is possible to add up values in 2nd and 3rd column, 2 rows at a time , then 4th and 5th column and so forth, by some formula rather than doing it manually?
View 4 Replies View RelatedIn the attached worksheet I am trying to create a range from
C4 to C12 (all the Officer Roles) and move it to Column E same Range
and
G4 to G12 (all the Officer Names) and move it to Column H same Range
I would need to do this for the entire worksheet. i.e. move all the Officer Roles over 2 columns and the Officer Names over 1 column.
I tried to piece meal it together from code I found here, but I am getting a "wend without while" error.
I've used the macro recorder to copy a cut and paste routine, but it won't play back correctly. Here's the macro I recorded:
View 7 Replies View RelatedDate
Product
Pass
Fail
Repair
Group Product 1
P
F
R
Group Product 2
P
F
R
Group Product 3
[code]....
I currently have raw data in Sheet 2
On sheet 1 would like to get the summary of the data as posted in the picture... unfortunately there are "groups" in the raw data and I need them separated and conformed to get an accurate picture.
I started a project where I want to export data from Access (only 2 columns but # of rows vary every day). When the data that is copied to the first tab is a week old and is a Tuesday I want to copy and paste these values in the next tab.
View 9 Replies View RelatedI have a big table with a lot of data in it. I basically want to get rid of all of the empty cells, so that all the data that is there for the one person is all next to each other.
All the people's names are in a row for themselves so the empty cells would have to move to the left.
how to write the following in a macro. The task is to have the macro compare both the SSN, amount, and date...if they match go to next row. If Mysoft side exists without a match on the OMNI side, then range for that A-D will be cut and moved to Mysoft Only worksheet and the cells below will be moved up....same holds true for the OMNI side.
I have a spreadsheet with data organized into columns in sets of two - the first column is an X value (Pixel number) and the second column is the Y value (pixel density). I'm trying to make a macro that will select the first set of columns, chart it, move the chart to the next sheet, then select the next two columns of data, chart them and move the chart to the next sheet etc. I've gotten as far as having it make the chart and move it, but I can't seem to make it select the next set of columns - I've been trying different things for a couple days now.
Code:
I have a report that I need to reformat where part of the information is moved from rows to columns.
The report is broken up into "sections" as follows: Each “section” is a series of multiple rows and is broken down as follows:
ROW 1: Contains data (in a single cell) about a Sales rep, which includes (1) rep number & (2) rep name
NEXT ROW(s): Contains data information about an invoice(s), which includes date, invoice number, client name, trans ID, etc. The invoice data can be one row up to as many as 500 rows
LAST ROW: Contains the Rep Subtotal
I need to spit out a report that contains the invoice data only (the middle part of the “section”). I don't want "ROW 1" or "LAST ROW" of each section in the output. For each invoice row, I need to include the rep number and the rep name for each invoice. As noted, the rep number and name is always listed in the row preceding the invoice data. The format is always a 6-digit code followed by the name. So I need to split the data into two pieces.
is there anyway to arrange pivot table columns without manipulating the field list items?
in other words, in older versions of excel, you could just right click the column and select move left, or move right
I need to move a portion of info over 4 columns. I need to do this after a certain criteria is met.
A B C D E
1 Mem# Mem Name Sta Area
2 123C Joe Smith G bev
3 4 Wine 4.95 6
4 5 wine 5.95 6
5 2 food 6.95 5
6 124G Fred Choi C Bev
7 4 Wine 4.95 6
8 5 wine 5.95 6
9 2 food 6.95 5
A3, B3,c3,d3 need to shift over 4 clmns then when nxt member #(a6) is met rows below need to shift over 4 clmns until nxt mem #, so on and so forth. Please Help. New to the macro scene.
I'm creating a mailing list by pasting text into a spreadsheet, then spending hours cutting and pasting the company name into column c, address into column d, city into e...and so on. Then move down 5 rows and do it again.
I'm not sure where to start, I recorded several macros but none have worked.
I have 2 large rows of data next to each other imported from a different programme. Some of the cells in these 2 rows consist of values, some consist of words. I only want to cut the cells with values in these rows and paste them in a new row, called TXid. I have written VB code that cuts all the data in the rows and pastes them onto the new row. Now I would like to cut only the values in the row. How do I select only the values in the cell?
Cells.Select
Cells.EntireColumn.AutoFit
Range("I1").Select
ActiveCell.FormulaR1C1 = "TXid"
Range("G3").Select
Do
If ActiveCell = IsNumber = True Then
Selection.Cut Selection.Offset(0, 2)
End If
ActiveCell.Offset(1, 0).Select
Loop Until ActiveCell = ""
Range("H3").Select
Do
If ActiveCell = Isnumber = True Then
Selection.Cut Selection.Offset(0, 1)
Loop Until ActiveCell = ""
The ActiveCell = Isnumber = true is not working the way I want it to.
I've got a rather simple question. I need a code which would activate a cell which is located 10 rows down from the currently active cell. I found this piece of code
Sub move()
ActiveCell.End(xlUp).Offset(10, 0).Activate
End Sub
but somehow it does not do the job it is supposed to do.
I want to create a chart where I have 5 clustered columns, repeating 4 times(weeks). Each column(total invoices entered per user) has a error rate, which I would like to display as a line graph with markers. In other works, first column has its own line, second column has its own line etc. this spans the 4 weeks. When I create the chart now, ALL 5 the line markers are placed in the same one column. I can not move the line marker to sit on top of the column it is associated with.
View 2 Replies View RelatedI am trying to move information that is pulled from a database to look cleaner and easier to read. All of the information exports out into column A only. The attachment is a brief example of what it looks like, and what I’m trying to get it to look like.
I want to move the data in col A to 5 columns C through G in groups of 16 rows. Once the last column is filled with a group of 16, it needs to fill below the first group of 16 in column B onward to column F. It should repeat this process until there is no more data in A. The attachment shows it much better than i can explain it.
I have some basic experience with formulas and macros, but I haven’t had any luck trying to manipulate any of them to give me the information the way I have shown. I would prefer to not have to manually type or cut and past the information in if possible.
How can you move data from multiple columns into a single column? I have attached a short example of the data I receive. (In reality, the data could be hundreds of columns and/or hundreds of rows, but this is representative of what I might receive). It does not need to be sorted and including the header row in its own column is optional. I do not know VBA all that well but can muddle through it if someone can give me an example of what the code should look like.
View 5 Replies View Related
