Moving Data From Multiple Rows To A Single One
Jun 29, 2014Any macro capable of moving data from multiple row to a single one i have attach a sample file before and after ...
View 4 Replies
ADVERTISEMENT
Moving Data From Single To Multiple Columns And Merging?
Dec 16, 2012Current Data:
File 1:
Each set of data is listed in either two or three rows
Eg.,
ID
Date
Filename
ID
Date
ID
Date
Filename
The goal is to move them to separate columns (rows can be 3 or 2 for each data set, and may or may not be separated by space/additional row)
File 2:
Has a common field 'ID' as that of File1, does not have Date, and Filename, but has a new field 'Detail' (already in the expected format)
Eg.
ID Detail
The goal is to merge properly formatted data from File 1 to File 2
Eg
ID Date Filename Detail
Moving Data From Multiple Columns To Single Column
Mar 28, 2012in moving data from multiple columns to a single column. I have attached a sample image from an excel file which details the requirement. The first column contains a qualifier, that should remain constant when the data from columns B to the end move to a single column "B". The number of columns for each row is different, however, there is a maximum number, say 25. As mentioned in the image, when the data from columns B to the end is moved in to column B, column A is retained fixed, to the original value, and the original data below it is pushed below. Any pointers to how this can be achieved by VBA or without VBA?
View 6 Replies View RelatedMoving Data Cells From Multiple Columns To Single Column
Nov 14, 2011I'm trying to work out how to take all cells with data from multiple columns and stack them in a single column.
Here's the history...
I have multiple part numbers in single cells in column A. I perform a text-to-columns function. The resulting part numbers spread across multiple columns (say, B through K). Now I need to get all the part numbers, in their own cells, stacked in column A for one continuous list of single cell part numbers.
Is there a VBA option for cutting only the data cells from Column B-K and pasting the data at the bottom of column A while avioding blank cells?
Combine Data From Multiple Rows Into One Single Row?
Jun 8, 2013I have a set of data with 5 columns. The first column is ID. Now I have the same ID recorded several times with different data (in the other 4 columns) against the ID. I want to concatenate the data with the same ID into the same row. The data has already been sorted by ID. If it is the first time this ID appears, record the whole 5 columns. If the ID appears again, then record only the 3rd, 4th and 5th column. When I run my code, I got error 'subscript out of range (Error 9)' . It seems that the array I use has only 5 columns. But I don't know how to modify this.
VB:
Sub Patient_Detail()
Dim n As Integer 'index of rows to record to
Dim i As Integer 'index of column to record from
[Code].....
Transpose Multiple Rows Of Data To Single Row?
Jul 24, 2014I have a set of data that I need to change the "layout" of. I've had similar situations before, but this one is just killing me. Basically, my data is for item pricing. It is represented as
Item, QTY, Price
A,1,1.25
A,10,1.1
A,25,1
A,100,0.9
B,1,1.25
B,10,1.1
B,25,1
B,100,0.9
C,1,1.25
C,10,1.1
C,25,1
C,100,0.9
Item D,Qty1,P1
Item D,Q2,P2
Item D,Q3,P3
Item D,Q4,P4
However, I need it in the following format:
A,1,10,25,100,1.25,1.1,1,0.9
B,1,10,25,100,1.25,1.1,1,0.9
C,1,10,25,100,1.25,1.1,1,0.9
Item DQ1Q2Q3Q4P1P2P3P4
As a note: there is a maximum of 4 Price/QTY breaks, so the script can be hard coded for that. When I tried this, I had it looking at the Item column, finding out how many breaks there are for a specific item and then doing a loop to extract the qty and price to a single row in the format shown above. It worked for the first 2 items, but then the loop got throw off. I will see if I can reproduce the code for that.
Consolidate Multiple Rows Of Data Into Single Row
Jul 28, 2006I imagine my goal could be achieved via some scripting code, but, alas, I don't do vbs. Here's the situation:
I have a spreadsheet generated by another office which lists individuals' names and information about participation in various programs. Each line lists name, address, program title and amount. The next line may be the same name, address with a different program and amount. Each person may have 4-5 entries. I want to make single entries for each individual, with colums showing the programs and amounts.
Current:
ID Name Address Program Amount
1 Bob home A 25
1 Bob home B 37
2 Dave home A 22
2 Dave home B 10
2 Dave home C 21
Need:
ID Name Address Program A Program B Program C
1 Bob home 25 37 0
2 Dave home 22 10 21
Hopefully this makes it a bit more clear. The only way I know how to accomplish this is the "old fashioned" long hand approach of cut & paste. There are several thousand individuals, with (currently) tens of thousands of rows.
Organize Data From Multiple Rows Into Single Row
Jun 12, 2007I would like to automate, due to how long it would take to manually organize the data myself. I have all of the raw data needed organized into 3 columns. The problem is that some of the related data is divided up into multiple rows, based on ID number. What I would like to do is take the related CPT codes and respective descriptions, from the same ID number, and place them on the same row. I am going to include some pics and even a small chunk of the source data. Here is a pic of the raw data:
And here is the first 3 already done:
The number of CPT codes per ID number range from 2 - 5 I believe, maybe 6. Not sure if this has any bearing on how it is done.
Data From Multiple Rows Into Single Column
Oct 19, 2007I am trying to take data from multiple rows and columns (matrix) and reformat it all to fit in a single column.
It would be great if I could select the cells I want to reformat into the single column as the number of rows and columns containing the original data is not always the same (ie 20x20, 21x35, 56x200) etc...
Retrieving Multiple Rows Of Data From One Single Item?
Jan 3, 2014retrieve the multiple rows of data from one specific item to another worksheet inside same workbook. below attachment is my sample workbook.
inside the workbook, eg.. please have a look on Sheet 3 (the record of the item and its description) will store on Sheet 2. From sheet 1, when user choose the item from drop down list, and click the button will direct to the retrieved result in sheet 2. my question is i cant retrieve the multiple rows of data exactly in the sheet 2. it only remains one item for one row of description.
and below attached picture is what i wish to achieve =)Capture.PNG
Copy Multiple Rows Data To Single Column
Oct 29, 2008transposing and sorting data into multiple columns.
Column 1 for example will have the Parent's Name. Column 2 will have the Children.
If Mark has 3 children, X Y and Z
Jim has two children, A and B
then I want Column 1 to display Mark and Jims Name and column two should display all the children
Here is how I want the data:
Column1 Column 2
Mark X
Mark Y
Mark Z
Jim A
Jim B
Please see attachment.
Single Column With Multiple Rows Of Data - Compare Names
Apr 12, 2012I have a single column with multiple rows of data like this: Afirst last, Bfirst last, Cfirst last (all in one cell) etc.
I want to type some names in one cell in the same format (Afirst last, Cfirst last, Bfirst last) but not order and then check if any of those names exist in the first column and count the results of matches.
So in this example I am looking to count Bfirst last and/or Cfirst last in every cell of column A. I need to use a formula.
Summarize Data From Columns In Multiple Sheets To A Single Datasheet Of Rows
Jun 19, 2014I need a macro that will take hours by day (columns) by service (rows) per client (sheet) and summarize the data into one database of rows containing client, service, date, and hours. The "Summary of Charges" should only include service hours > zero. I am attaching a sample file. I have little to no experience with vba so I don't even know where to begin. I can copy code.
View 4 Replies View RelatedMoving Multiple Rows Into One Row (1 Record Has 4 Rows)
Jun 10, 2013I'm trying to create a .cvs file from an exported excel report, but before I can import it to a database I'd like to have one row per record.
I've already omitted out the headers and footers blank spaces and unnecessary columns from the excel file and I needed to just combine multiple rows into one.
It currently looks like this:
ROW#(1), ID#(1), NAME(1)
ADDRESS(1), ZIP(1)
DOB(1), SOURCE(1)
ITEM(1), CITY(1)
ROW#(2), ID#(2), NAME(2)
ADDRESS(2), ZIP(2)
DOB(2), SOURCE(2)
ITEM(2), CITY(2)
and so on..
I'd like to make it like
ROW#(1), ID#(1), NAME(1), ADDRESS(1), ZIP(1), DOB(1), SOURCE(1), ITEM(1), CITY(1)
ROW#(2), ID#(2), NAME(2), ADDRESS(2), ZIP(2), DOB(2), SOURCE(2), ITEM(2), CITY(2)
and so on...
I can't figure out a macro or a way to do this automatically.
Moving Rows Into Multiple Spreadsheet Using Macro
Jan 20, 2008Is it possible to move rows of data in a spreadsheet to multiple spreadsheet accordingly?
I had lists of tasks in a single spreadsheet and i need to segregate the tasks for all my staff in serial while no duplication among all of them. For instance, i got 4 personals in my department and i need the 1st 4 tasks to be distribute to each of them and next 4 tasks accordingly. This is due to all tasks are equip with due date and i need to calculate how much time i need to accomplishing them. i'm used to manually move it and found it time consuming, so i was wondering if someone would instruct me where or how to achieve it by using a simple macro.
Moving Data From Rows To Columns And Delete Repeated Rows
Apr 16, 2014removing duplicate rows and move other data frm rows to columns.xlsx.
I am attaching a sample excel sheet showing what I need to do.In the first tab, I have a list that includes duplicate rows (first column only). I want to remove those duplicate rows but I don't want to lose the data in the following columns which can be unique or duplicates as well.
see the desired result tab in the sheet to get an idea of what I am looking for as the end result.
Keep in mind that the actual source file I am working with could have up to 50000 row, and the expected results could be around 2000 rows. So nothing can be done manually.
Moving And Deleting Entire Rows Between Tabs In Workbook And Moving Them Back If Needed
Sep 23, 2013I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies View RelatedMoving Rows Of Data Into 1 Row
May 20, 2014I'm essentially getting a lot of data at the moment, which has a few orders people have made on my website.
Essentially, think order id, address etc and then all the products the customer has ordered.
However, the part which includes what the customer has ordered creates multiple rows of data, with the order ids etc duplicated. What I need to do is consolidate this into 1 row. So to add additional columns instead of rows.
The reason fro this is I want to mail merge the data into an invoice and mail merges work of 1 line of data at a time. I've attached an example, any way to do this?
(Attached to this post / or linked here: [URL] ....)
Multiple Rows To A Single Row
Nov 28, 2009I have a long spreadsheet, that has a format something like this: ...
View 6 Replies View RelatedSingle Row Into Multiple Rows
Dec 24, 2007Is there a way convert single cell with wrap text into multiple cells with the number of resulting rows based on the number of lines in the original cell. Due to the restrictions of my overall printable "document", I must use multiple cells of the same height. Any change of row height would throw off the desired final result.
As an example, when I start with my original cell in text wrap and set column width I get something like the following in cell F2:
ASTM A743 UNS J93254
(SUPER AUSTENITIC)
(LONG LEAD TIME
MATERIAL)
This looks great, but it is all in one cell, and the four lines of wrapped text have obviously increased the row height which is bad.
I have tried using the LEFT and MID functions to force the text into different rows based on character length, but this is sort of messy since I am never sure what the input will be resulting in something like the following (this time in cells F2:F5) with spaces at the beginning of a line or breaks in the middle of words:
ASTM A743 UNS J93254
(SUPER AUSTENITIC)
(LONG LEAD TIME MATE
RIAL)
My ultimate goal would be to somehow format the original input data text so that regardless of the input, the text would be restricted to a certain column width, sending the remaining text to the next consecutive rows down, and maintain the integrity of the original. I can have as many intermediate cells, formatting as I go to get to this point.
Of course, I could manually enter the text in the different rows every time, but it would be nice to have a succession of formatted cells so that the desired end result would be automatic. Hopefully, the answer does not involve too much in the way of macro or any VBA code since I am a pitiful novice, and we are sort of under pressure to get this project under way.
Sum Multiple Or Single Rows
Feb 9, 2007I have a cash receipt worksheet and want to sum up the days cash. My problem is some days there are one receipt and some there are five. I have to keep hitting the sum button to make it include the proper range.
View 7 Replies View RelatedDeleting Rows And Moving Data..
Jul 26, 2009I have created a spreadsheet with 4820 rows of data (4821 for computational purposes, the last row being blank) with 5 columns.
1. every third row is blank and it needs to be removed (3, 6, 9,...4818, 4821). Once this is accomplished,
2. I need to move the data that is now found in the even rows, column E moved to the above, current odd row, column F. (ie. E2 to F1, E4 to F3, E6 to F5,...E4808 to F4807...,E4820 to F4819 (however it won't go this high). then
3. I need to delete all the current even rows, as the data I need will be in the odd rows.
Moving Data From Columns To Rows
Sep 24, 2009I have the following spreadsheet with 4 columns of data:
1000001245aMr Fred Blogs
1000001270a1 Blog Street
1000001270bNorwich
1000001270cNorfolk
1000001270eNRx x99
1000001270gThe Manager
1000001270k01603 555 555
1000001270l01603 555 555
1000001270qManager
1000001270xN
1000001270yN
1000002245aMrs Fredilina blogs
1000002270a10 Blog Street
1000002270bNorwich
etc etc for about 36,000 rows.
What I need is for each unigue reference ID (column A),
I need all corresponding data moved up into a single row in serperate columns, something like this:
1000001 |245|a|Mr Fred Blogs| 270|a| 1 Blog Street|270|b| Norwich | 270|b|Norfolk |etc
1000002 |245 |a |Mrs Fredina Blogs |270|a|10 Blog Street |270|b|Norwich| etc
Each entry doesn't nessesarily have the same number of rows.
I would class myself as a beginner VBA bod, but the solution to this one is illuding me a present.
Moving Rows Of Data To Another Sheet With Vba
Feb 3, 2010I have an excel file that contains about 1000 rows of data, from column A to O. Column C contains either the letter A or the letter I, A means Active, I means Inactive.
What I'd like to do is replace my monthly manual task of moving all the I's to sheet2. When completed, the excel file should have two sheets, all of the A's on one, and the I's in the other. The original excel file is not sorted by column C. The end result should have the same row 1, being the header row. There are some additional steps, to save the file to a specific location but I think I could do that once the excel file is formatted the way I wanted it.
Moving Data From Column A To Rows
Jan 9, 2008I have data that is all in column A there are 8 pieces of information.
So client 1 info is listed from A2-A9, client 2 from A10-A17 etc. etc.
I set up A1-H1 to be the headers necessary.
How do I go about moving A2-A9 to A2-H2, then A10-A17 to A3-H3 etc. down through all the contacts which go down to A2400...
Convert Multiple Rows To Single Row
Feb 4, 2014I have a database of addresses that has each address as several rows which I want to convert into a single row. In the source file there is a blank row between records. I have attached a sample file with two sheets in it. One is the "before" data format and the other sheet is the "after" example of how I would like it to come out. We have thousands of records to convert so I need something that can be automated instead of a massive cut and paste operation.
Here is the sample: sample conversion.xlsx
Combining Multiple Rows Into Single Row?
Apr 9, 2013I have a HUGE spreadsheet (1,000,000 rows) that contains a series of reports. The first row of the report contains all of the report identification numbers. The next 20-50 rows contains the report details, all in column A. Then the report ends with a cell in column A containing "[report_end]" and then on the next row the next report begins.
I would like to compress the report details all into a single cell in column A so that there is only one row for each report, sort of like this:
AA | BB | CC | DD
xyz
123
[end_report]
AA | BB | CC | DD
xyz
123
[end_report]
becomes:
AA xyz 123 [end_report] | BB | CC | DD
AA xyz 123 [end_report] | BB | CC | DD
Single Column -> Multiple Rows
Mar 5, 2014I have a single column of about 1500 points, and I need them to be separated into many rows of 20 numbers.
I have multiple issues:
1) The middle number of each row (10th and 11th) need to be repeated. So a transpose formula can not work all the way through the 20 numbers. Unless I transpose the first ten, then tranpose the second ten. Is there an easier way around this ?
2) The bigger issue is, I would like to write a formula that can manipulate the date to enter in the correct cell.
To illustrate I will use a set of ten numbers:
1
2
3
4
5
6
7
8
9
10
11
12
INTO
1
2
3
4
5
6
7
8
9
10
11
12
Convert Single Row To Multiple Rows
Mar 16, 2014Macro to sort column data.
I have a spreadsheet in the following format (just a flavour of the format)
SD 1
SD2
SD3
1a
1b
1c
2a
[Code]...
Each row refers to a survey response, the first ten columns being standard demographics.
Following this each group of 5 columns for the next 100 columns represents a single response. What I want to do is convert each single row to multiple rows with the same first 10 columns and each single response on its own row like so:
SD1
SD2
SD3
a
b
c
a
[Code]...
I found an excellent similar example on this board here Convert a single row to multiple rows with the same A column value However I would like my macro to convert to rows even if the cells are blank So each existing row will generate 10 individual reponse rows regardless of data found).
I am interested to know how this would work and how i could modify the variables to acommodate 15 standard demographic fields and 20 columns per individual responses.
Moving Data (Addresses) From Rows To Columns
Dec 12, 2008I have address data all in column A (each paret of the address is on a separate row) which I need to move to separate columns on one row for each address:
ie:
Mr Bloggs (row 1)
123 The Avenue (row2)
The town (row 3)
The postcode (row 4)
Mrs Smith (row 6)
456 The street (row7)
The postcode (row 8)
needs to be: (I have used || to indicate different columns)
Mr Bloggs || 123 The avenue || The town || The postcode
Mrs Smith || 456..... || .......
The problem you see from the above is that they are not always consistent ie. the postcode (zip) isn't always 3 rows below the name for example. Also although generally there is a blank row between each record (this may sometimes be 2) and equally there may also be times when there is a blank line in the address.
Any ideas on how to do this.... I have 1000's of records and really can't afford to go through each one making it consistent before moving it to columns?