I have a mastersheet (see attached file) with data on it. I need to parse this data out to individual sheets based on the values in column 8.
Currently I use this code but it only creates sheets with no data in it and it also doesn't rename the sheet tabs.
[Code] .....
Sample.xlsx‎
[data] ....
With the above data, I'd like put all of the data for each respective dept on it's own sheet. Obviously I have many rows of data and departments so manually would be almost impossible.
I am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?
In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.
writing a loop that will perform the same action on 11 worksheets but stop if it gets to a sheet with no data in cell A1. The data in A1 will be text. The code I wrote below below does what I want it to, but I have to run it on each individual sheet.
View 14 Replies View RelatedI have a workbook with roughly 28 tabs(sheets) and i need to be able to run a macro that will create a new sheet for each tab and name it based on the tab name.
View 9 Replies View RelatedI have multiple sheets on which users enter data in Cells B3 to B21 on each sheet.
I have a master sheet where the information entered on individual sheets is copied by links. On the master sheet the information is displayed in Rows. Thus data on Sheet1 B5:B25 is displayed in Row 6 cells H6:Z6 of Master Sheet, data on Sheet2 is displayed in Row 7 cells H7:Z7 etc. The formula in H6 of the Master Sheet is =Sheet1!B5, in H7 it is =Sheet2!B5 etc. It is of course not possible to use Autofill to copy formulas across on the Master sheet. It can be done manually but there are hundreds of cells to fill.
Is there an elegant way to copy the formulae on individual sheets onto the Master Sheet.
I want to be able to repeat the procedure later if additional sheets need to be added.
I'm looking for a worksheet function that will allow me to separate into another cell the characters between the second and third slash in the source cell. The number of characters varies, but the value I want is always between the second and third slash.
View 3 Replies View RelatedWe have a weekly "On-Time" report that shows early, late, on time, or no data. Each week has a total percentage of early, late, on time, or no data deliveries. I now need a monthly total on a seperate worksheet, but for some reason I can not get the percentages to total correctly. I am attaching the spreadsheet.
View 3 Replies View RelatedI have a file with multiple tabs of data...lot's of data (each tab has 80,000+ lines and 23 columns...3 are formulas, the rest is imported data). I've brought Excel to it's knees (i.e. crashes). Yes, I'm using 2007.
What I'm trying to do is extract 6 cells of data from every 10th line and write it out to a CSV file with two more pieces of information (same for each line).
What I was doing was creating a separate worksheet for each one to be extracted, parsing out the data, and then copying that data to yet another workbook that was then saved as a CSV.
First, in retrospect, that was a waste of time. Second, the addition of the extra worksheets to do the parsing was crashing Excel due to the extreme size of the workbook.
What I'd like to do is use a macro to do all of this in one swell foop:
1) Prompt me for a file name (or I can put the desired name in a cell and read it from there if that simplifies the code)
2) Open a new text file with that name and ".csv" extension in the same folder as the original workbook
3) Write out the column headers: (Fix, Satellites, Lat, Lon, alt (ft), Date, utc_t, course)
4) Step through each row, looking at the text contents of column B (looks like 22:50:07.100)...if it ends in ".000" do the following:
4a) write "PPS,4," to the open text file
4b) write the cell contents from columns "V", "W", "J", "C", "B", and "L" to the text file in the exact format they appear in the text cell.
The output file should look like (very short example):
Fix,Satellites,Lat,Lon,alt (ft),Date,utc_t,course
PPS,4,30.543203,-86.323328,1419.04,2009/12/17,23:26:22.000,243.95
PPS,4,30.539272,-86.332765,1831.53,2009/12/17,23:26:34.000,242.61
PPS,4,30.535680,-86.340912,2281.16,2009/12/17,23:26:44.000,244.34
I have a PDF document with an income statement that I'm trying to bring into excel. When I copy it, it puts all of the information in 1 column like this: NET INCOME 183,450 (237,660) 421,110 177 (1,461,273) (1,769,800) 308,526 17
CAPITAL EXPENDITURES Land Improvements 0 0 0 35,000 0 (35,000) Building Improvements 7,500 0 (7,500) 243,129 626,500 383,371 61. I cannot use text to columns, because the CATEGORIES are different in length (3 to 4 to 5 words at times).
I can seperate the numbers from the words, but I can't seperate the numbers from one another. Is there any way that I can do this via a text fuction?
*Example*
0 0 0 35,000 0 (35,000)
7,500 0 (7,500) 243,129 626,500 383,371 61
29,881 310,460 280,579 90 380,580 1,556,576 1,175,996 76
0 83,248 83,248 100 76,765 574,345 497,580 87
See attached spreadsheet. I need to have all the data which is held in 1 row in column A seperated into its own column automatically. The order i need the data to be in is as follows
Date(pink), Time(red), Racecourse(green), Race Type(black), Class Of Race(purple), Going(blue), Prize Money(yellow), Distance(grey), Number Of Runners(brown). the text in bracket is a key for the info for your ease of use.
VBA code (or formulas) that can parse data from individual cells into multiple columns? I have attached a file noting the current inputs in columns A-F and the desired outputs in columns I-O. Additionally, I have noted the distinguishing criteria for each of the fields in cells I13-O13. Also, I noticed that each of the data points in the input cells are separated by at least two spaces. Lastly, the input data in the working sheet goes from columns A-H and the desired outputs would start from column I; with row 1 having the headers.
View 13 Replies View RelatedI need to prepare a lot of data for upload from Excel to a system. Example, In cell A1: I have very long text that I need to parse into B1, C1, D1, etc, depending on the length as each cells can support up to 40 characters only.
It seems easy as I can just find the length of A1 and use mid to parse them to the rest of the cells. But the sales person wants the data to be readable, meaning that I can't just split the data simply based on the character limits.
I have a text file with no discernable format ( can't import into excel) that is too large to put all the data into an excel worksheet. This file is made to print out on a network printer.
I don't need all the info in the file, I would like to specify a variable, search the text file for the variable, then specify the amount of rows down to look for the data value and input the result into an excel spreadsheet.
My current project involves sorting a spreadsheet, selecting specific qualifying data from the sheet, storing it into a variable, the pasting the individual values from the list into individual cells on a different sheet within the same workbook. Here is the code I have so far...
Code:
Sub Test()
'' freeze screen updating to remain on main worksheet
Application.ScreenUpdating = False
'' move to Avaliable worksheet
[Code] ..
When this code runs the first item in the list pastes into Sheet10 A1, but no other values from the list are placed into Sheet10. Previous to this I had been using a variation of this code to push the list into a combobox list within a userform. In that case instead of
Code:
ThisWorkbook.Worksheets("Sheet10").Range("A1") = x
I had
Code:
Combobox1.list = x
And this worked perfectly; creating a list within the combobox (in fact I can use this modification to interrogate my code to determine if the list is being properly generated, and it is).
I am trying to determine a way to quickly import data from text files into Excel and place data in suitable columns (under correct headings). I am thinking I could be asked which file to read and import doing them 1 by 1, or if there is an automated way to cycle through all the files that would be more efficient (filenames are variable).
From the text files I have attached I can tell the column headers and what data should go under each. Not sure how you would describe the delimiting on these files? Are these files in a format that VBA could be used to reduce manual copy and paste approach? I have about 300 of these files I want to extract the data from.
Note: the attached files are from a public access website.
WELLS0214.TXT WELLS0106.TXT
I am working with a nonprofit to set up their financial ledgers. There is one workbook with 12 sheets, one for each month. The goal is to be able to set up a formula that searches through all 12 sheets for every donation that a specific individual has made. For instance, let's say that John Smith gave x amount of money on 1/1/2000, y amount of money on 1/10/2000, and z amount of money on 2/2/2000. This data will appear on 2 different worksheets. I have the following formula, which allows me to look through one sheet at a time:
{=INDEX(Jan!$B:$B,SMALL(IF(Jan!$A:$A=Smith!$A$2,ROW(Jan!$A:$A)),ROW(1:1)))}
Where Column A in each sheet is individual name, and column B is amount donated. Sheet "Jan" is the data for the month of January, and sheet "Smith" is the culmination of John Smith's donations for the full year. Using this array function, I am able to retrieve all data for John Smith in the month of January, but I can't find a way to make one function that searches for all of John Smith's donations in each month. Is there a way to build an array function in VBA that would accomplish this?
I have a list of data which i need to send to individuals. I can sort the data by person's name.
I need to send each individual person their own data. Instead of copying and pasting each person's data into a new tab for everyone, is there a quick way in excel that for each change in person's name (Column A), that it creates a new tab with all the data?
I have a workbook populated with values in 3 columns. The values of the second column group rows into larger segments. I want to pull one row for each different value onto a different sheet.
example:
1. apple
2. apple
3. apple
4. apple
How do I only pull one row of apples onto another sheet without copying by hand? I have attached an live example. I want to pull one row for each classification (column 2) named on the sheet without copy/pasting each one.
trying to insert rows into certain sections of a large data set.
Currently, there are over 25k rows of data and I need to insert individual blank rows between certain lines. The process is too daunting to try and do it individually (CTRL+Click row number) so I need to find a way to do it based on a specific number in one of the columns.
I can insert individual rows after filtering the data to only show the rows that need blank sets under them
I've included a sample to illustrate my point. There needs to be a blank row before every row with a "1" in the "count" column.
Data Sample.xls‎
I have plotted a chart through VBA and I am appending some information to certain data labels. This appended part is being turned a different color depending on if a corresponding value is less than or greater than 0.
Code:
For i = 1 To cht.SeriesCollection(1).DataLabels.Count
If ws.Range("C" & i + 1).Value < 0 Then[code]....
In stepping through the code, I notice that it works until the color switches twice. So for instance, if the first 3 points are below 0, it turns the appended part of the data label red. Then the next point is above 0 and it turns it green. Then the next point is below 0, and at this point it turns the appended part of EVERY data label red (overwriting the previous green one). It keeps going like this until all of the data labels are either red or green, depending on whatever the last value is as it just keeps overwriting.
i have a large table, columns A:F, would like a code which would look at the text in column F and create a new row for each bit of text separated by comma
probably easier to show what i mean, here is a section of the table, in this example store 13121 needs multiple rows.
start with this:
HTML Code:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th { background-color: #104E8B;
[code] ......
and turn it into this:
HTML Code:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th {
[Code] .....
I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
View 11 Replies View RelatedI’ve created a spreadsheet to record all transactions ( Sheet 1) at a train auction for members only (Sheet 2). Currently, the workbook I created will ‘manually’ create receipts for any buyers/sellers by filling in Member's name in Sheet 1 and then selecting ‘View ‘Member’ Receipt’ button.
Ideally, I would like a macro that will automatically generate a worksheet for any member that has sold or bought an item at the auction and insert worksheets between ‘Start’ & ‘End’ tabs (with option to refresh data) in location order (A-D). Because members come from near and far we would like to generate the members that need to travel the farthest first. Is it possible to create a receipt for only the members that have transactions?
This sheet is comprised of 3 different section. The purple section is an input field. Quantities are added based on product type and date. The blue section is a breakdown of all the individual parts that go into the specific product. The green section is a breakdown of all the possible parts in the entire product range.
What I would like is to populate the green field individual part # with the appropriate sum from all the different product types based on quantities desired. I'm sure this is a confusing description but it will make more sense once you check out the sheet.
I'm looking to auto populate "K7" with a color to indicate project status (i.e. green, yellow, & red) based on a percentage in "K1". The tricky part for me is I want a date range in G58 & G59 to drive the color in K7. So, when I enter a percentage in K1 and (for example I'm not at 90% with 3 days left in the project K7 will be RED.
View 3 Replies View RelatedI need to insert blank rows at the end of the each data segment to add totals for each individual. Is there a macro that I can use for this? I'm attaching an example file.
View 8 Replies View RelatedI want to track daily sales of a shop with the tenders (Cash, Master, Visa)seperated.
Everyday there will be a file ctp.dbf from a folder YYYYMMDD (previous day date) which contains sales details.
I tried to use sumif commands and everything is working fine. everytime i have to open book.xls and from it I do a files>Open to open the ctp.dbf for the calculation to be done. is there a way where by i can open 1 file and everthing i calculated properly?
Also this book.xls can only do for 1 day how can i go about having the daily sales detail of the month (look something like sales summary.xls) or even year in 1 excel file?
attached is book.xls and sales summary.xls for reference.
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......