i have this set of data (d.jpg). each cell is 2ms.
I want to compute how much is spent on each set (shown as one color) until the sate changes. In other word, the values are voltages, so i want to know how often the voltage toggles. then plot the toggling instances.
I do have a list of cables and its equivalent K values and volatages, i would like to make spreadsheet which if i choose for example 3c,300mm2 in 13.8kv it will find its K values.
table
cable K valuesKV
3c,185 mm26302033
3c,300mm2 1471213.8
3c,185 mm21102013.8
3c,300mm2 1128213.8
170mm2 ACSR2653533
170mm2 ACSR4730 13.8
how do I plot the axis data in my graph in an increasing order, when I have my datas in a random order?
In other words, I have bunch of data to be plotted as my x-axis. All numbers are within [0;1], but they all in a random order, like (0.001, 0.923, 0.120, ...). And I want them to be in an increasing order.
I use spectrometer in my reesearch. The datas are in (a, b) format in single cell. Is it possible to seperate a and b seperately? like a in seperate cell and b in seperate cell?
View 4 Replies View RelatedI have a set of data containing "N/A" in some cells, and when I try to plot the chart using stacked lines chart type, the chart is completely off. if the "N/A" are causing this problem and how to fix this.
View 5 Replies View RelatedI have a data for sedimentation along a pipe. I measured sediment concentrations at different lengths of the pipe, after different intervals of time. So I have 35 concentration values, take at 5 different points along the pipe, at 7 different times. Is it possible to plot a chart with these 35 points, with depth on y-axis, time on x-axis? These 35 points are percent removals (0-100). .
View 4 Replies View RelatedWe have a special testing machine in the lab I work in, and it measures reflectivity from reflective vests etc. A special instrument takes a reflective reading and reports back a X and Y value which is used then as a co-ordinate and gets plotted on a graph.
The machine measures for 8 colours, and takes four readings, so for example the first color will be Flourescent Yellow. and then it produces 4 "X,Y" readings, which get plotted onto a graph, and joins all 4 points to create a box as shown in the link >> Graph with joined plots
This is a small capture of the spreadsheet with the values >> spreadsheet
Basically, I need to know how to take the values in columns X and Y, and then make it plot onto a graph as one point, and then join the four points for that one colour,
end result being the grapgh will have upto 8 boxes on it.
nrel25mar.xls
I have attached Excel sheet as above. I wanted to plot graph time vs pic-zenith,pic-azimuth,pic-elevation .
I tried to plot graph but value of point in excel sheet is differ from table value. For single graph no problem,When all put together leading some problem. What kind of char can plotted above reading values.
I have the following data in excel (just an example):
X | Y1 | Y2
-3 | 9 | 1
-2 | 4 |
-1 | 1 | 1.5
0 | 0 |
1 | 1 | 1.5
2 | 4 |
3 | 9 | 1
I want to play Y1 and Y2 against X. Y2 does not appear on the chart because it's not continuous. I would like to plot Y1 (as a continuous graph) and a Y2 as dots (or scattered as excel lables it).
My chart with dynamic ranges still plots empty ranges despite using the following for empty cells:
Use of NA()
Use of #NA
Use of ""
Use of 0
What else am I missing?
I want to calculate various quantities from a set of data and I also want to plot the same data. When I have empty cells in the y-value range, but a value in the x-value range, I do not want these to be plotted, however, unless I insert a #N/A into the empty cell, excel plots them, even if you uncheck the option under Tools->Options->Chart, I guess because there is still an x-value.
I wanted to be able to post an example worksheet, but I'm not allowed to post attachments. Basically as I need to do a lot of these plots for different data sets, I don't want to individually have to tailor each one to account for the empty cells. The only solution I have found so far is to have one column that has blank cells, on which I use functions like Slope() and Intercept(), then I have another cell that has the formula
=IF(D36="",#N/A,D36)
this column is then used as the y-values to plot from, as this prevents excel from plotting them (if I were to use the #N/A column in the functions, I would just get #N/A returned). I then hide the column with #N/As in and allow the chart to plot from hidden columns. This seems ridiculously complicated for such a simple requirement,
if and/or how an hypercube surface can be plotted?
View 5 Replies View RelatedThere is probably a really simple solution to this, but I have a column 'A' of data, with various numbers, and a column of data 'B' with letters from A to Z. However when I try and plot this on a scatter graph, the x axis uses numbers rather than letters, with data points all over the place?? I'd like the X axis to have the letters A to Z, and the data to stack up vertically when there is a few different numbers correpdoing to 1 letter. Specifically, a scatter graph
View 3 Replies View RelatedI'm trying to make a scatter plot from two columns of data; the first, a series of decimals between 0 and 1, the second, a series of percentages between -40 and 140%. Essentially, I'm charting a performance (%) vs. a 'batting average' (decimal between 0 and 1).
However, when I plot these data points, the x-values the chart takes are, I suppose, the relative position of the data within the column (i.e., 5, 9, 32) as opposed to the actual values (.33, .71, .92, etc). I've tried manually selecting the data, copying only the values into different cells...nothing seems to work. Each time, I get points like (11, 61%) instead of the desired (.48, 61%).
I have 3 different series: S, J, and D. Each series has a list of different dates, and I need to plot the results for each date, while comparing the 3 series. I have created 3 different charts to display the results for each series - list of dates. However, I'd really like to chart all 3 series on one chart, so that you can see how the 3 compare.
I believe my obstacle is that the list of dates are not consistent between the 3. I tried to get around this by creating one table with all the dates, and leaving blanks where necessary (on Sheet 2). However, this created a problem because the blanks showed on the charts as 0s.
Is there a way to plot a function, for example y = a + x*b or y = e^x in a graph without it having x and y values in cells of the spreadsheet?
That is, in y = a + x*b, for example, what I'd like to do is have an input cell for a and b, but no cells that show a value of y for every corresponding value of x , and a graph on a chart showing what the function looks like. Thus, the graph would only rely on inputs of a and b and on nothing else. A program called MathCAD does this, but I'm not sure how to do this in excel.
I've two collumns, after some index the values of cells are zero
how i can draw a chart without selecting those zero cells?
I have a need to present 2 sets of values on the Y ( vertical ) axis but the Scales differ appreciably. I 'd like to know how can I present these so that I can appreciate the changes in both these values.
E.g. X fn of A B ( Y axis )
When I plot X against A & B because B has a HUGE range , variations in A appear minuscule. How can I address this scaling problem so that pictorially I can appreciate both changes in A and B against X.
Is there is Way to Plot A and B on different Y axis like one is on the LHS Y axis and other one on the RHS Y axis .
This is a PIVOT chart using data from another worksheet.
I have the Lat and Long for each of several US cities. I want to use these to create a bubble chart that plots the cities and which I can place over a US map picture.
However, I have the problem that, because of the curvature of the earth, the city locations form the lat and longs are not tying with the map.
how to adjust the lat and longs so that they will correspond to the typical US map?
For example, the base lat and longs for Denver are 39.5742 and -104.8588. What formulas can I use to modify these to match the standard map projection?
Say I have a line graph pic in jpeg. Can I plot the critical points (by clicking) on the line graph plot, so as to be able to get the (x,y) data, and thus, have all the data points to be able to re-produce the charts in XLS?
Basically, in other words, I would like to reproduce the line graph in XLS.
Or has anyone developed this kind of application, or can anyone redirect me to the right direction?
How do I plot the projected increase on an existing chart column ...
View 9 Replies View RelatedI want to do almost exactly this, but when I assign null using "", and plot the result on a graph, the graph thinks that cell is populated with a 0. Let me try to be a bit clearer. I have a range of dates in Col A, and percentages in B and C, but my last 3 dates in Col A have empty cells in B. Cols B and C are separate series. The line graph is (correctly) plotting series C, and series B, whose line stops where there is no more data.
What I need to do now is replace those empty cells with a formula like the one above. Ie, IF(ISBLANK(x1),<null>, <formula>), but using IF(ISBLANK(x1),"", <formula>) doesn't make the line on my graph stop.
I am tasked to plot some client satisfaction data on a monthly basis. I want to be able to show the client satisfaction with different aspects of service delivery. Can have a chart with "Good", "Fair", and "Poor" on the vertical axis with months on the horizontal axis?
View 1 Replies View RelatedI want to plot a graph where our customers can compare their results against our standards. (line graph) This has been easy in the past but rather than just having a single value as the standard we now a range for each standard a minimum value and a maximum value. How can i get both the minimum value and the maximum value plotted on the chart? This would be two lines with the area between the standards shaded in. The customers could then plot their results to compare against our standards?
View 1 Replies View Relatedhow to plot dates which are unequal in interval
the dates that I want to plot are the following:
1/2/13
1/7/13
1/14/13
1/21/13
1/28/13
2/4/13
2/11/13
2/19/13
2/25/13
3/4/13
3/11/13
3/18/13
3/25/13
I want to appear them exactly on my X axis no different dates in between them.
Is there a way to plot the grand total from a pivot table on the pivot chart?
View 9 Replies View RelatedI've written a vba code to graph a large number of graphs for me with two data series on each graph. To test my theory on it working I broke it down into parts and ran each separately as I went so I wouldn't have to sift through the whole thing to find an issue when I was finally finished... well I'm finished and it has a random error.
Code:
Sub chart()
Dim n As Integer 'worksheet index number that the chart goes on
Dim date_col As String
Dim m_max As String
Dim m_min As String
Dim m_avg As String
[Code] ....
I stuck a end sub here for the sake of trying to isolate the part throwing the error and it still came when I ran the top part.
'Average Temperature
Worksheets(n).Shapes.AddChart.Select
ActiveChart.ChartType = xlXYScatterLines
ActiveChart.SeriesCollection.NewSeries
ActiveChart.SeriesCollection(1).Name = "Actual Average"
[Code] ........
How can i exclude Blank or cells that have a 0 when plotting my graph? Right now everything is very small because i have about 50 cells, some with quantities and some with zero quantities.
View 9 Replies View RelatedI have mapped data from Sheet1 to Sheet2 and created graphs in Sheet2 using the data. but when I hide the rows in Sheet2 the Graph is being cleared off. Need a solution so as to display the Graph in Sheet2 while hiding the rows in the same sheet.
View 2 Replies View Relatedi am creaing a chart in excell but i have a problem. i would like to have a chart like this one http://shrani.si/?screenshotow31.jpg. but when i create my chart it looks like this http://shrani.si/?screenshotow2t.jpg. first chart is created with some macro so i dont know how is it working but i think the problem is in blank cells because if cell is blank the chart line will go to 0 but i dont whant that :s
View 2 Replies View Related