Chart Still Plotting Zero Value Ranges
Mar 21, 2008My chart with dynamic ranges still plots empty ranges despite using the following for empty cells:
Use of NA()
Use of #NA
Use of ""
Use of 0
What else am I missing?
ADVERTISEMENT
Avoid N/A With Plotting A Chart
Mar 27, 2014I have a set of data containing "N/A" in some cells, and when I try to plot the chart using stacked lines chart type, the chart is completely off. if the "N/A" are causing this problem and how to fix this.
View 5 Replies View RelatedPlotting 3 Sets Of Different Dates On Same Chart?
Jan 17, 2014I have 3 different series: S, J, and D. Each series has a list of different dates, and I need to plot the results for each date, while comparing the 3 series. I have created 3 different charts to display the results for each series - list of dates. However, I'd really like to chart all 3 series on one chart, so that you can see how the 3 compare.
I believe my obstacle is that the list of dates are not consistent between the 3. I tried to get around this by creating one table with all the dates, and leaving blanks where necessary (on Sheet 2). However, this created a problem because the blanks showed on the charts as 0s.
Plotting Cities On Bubble Chart?
Apr 10, 2012I have the Lat and Long for each of several US cities. I want to use these to create a bubble chart that plots the cities and which I can place over a US map picture.
However, I have the problem that, because of the curvature of the earth, the city locations form the lat and longs are not tying with the map.
how to adjust the lat and longs so that they will correspond to the typical US map?
For example, the base lat and longs for Denver are 39.5742 and -104.8588. What formulas can I use to modify these to match the standard map projection?
Plotting Chart To Get Data Values
Nov 19, 2006Say I have a line graph pic in jpeg. Can I plot the critical points (by clicking) on the line graph plot, so as to be able to get the (x,y) data, and thus, have all the data points to be able to re-produce the charts in XLS?
Basically, in other words, I would like to reproduce the line graph in XLS.
Or has anyone developed this kind of application, or can anyone redirect me to the right direction?
Plotting Projections On Chart Column
May 25, 2006How do I plot the projected increase on an existing chart column ...
View 9 Replies View RelatedStop Chart Plotting Values
Dec 7, 2007I want to do almost exactly this, but when I assign null using "", and plot the result on a graph, the graph thinks that cell is populated with a 0. Let me try to be a bit clearer. I have a range of dates in Col A, and percentages in B and C, but my last 3 dates in Col A have empty cells in B. Cols B and C are separate series. The line graph is (correctly) plotting series C, and series B, whose line stops where there is no more data.
What I need to do now is replace those empty cells with a formula like the one above. Ie, IF(ISBLANK(x1),<null>, <formula>), but using IF(ISBLANK(x1),"", <formula>) doesn't make the line on my graph stop.
Plotting Grand Total On Pivot Chart?
Sep 13, 2010Is there a way to plot the grand total from a pivot table on the pivot chart?
View 9 Replies View RelatedChart Not Plotting Hidden Rows/Columns
Sep 14, 2006I have mapped data from Sheet1 to Sheet2 and created graphs in Sheet2 using the data. but when I hide the rows in Sheet2 the Graph is being cleared off. Need a solution so as to display the Graph in Sheet2 while hiding the rows in the same sheet.
View 2 Replies View RelatedStop Chart Plotting Blank Cells
Dec 12, 2006i am creaing a chart in excell but i have a problem. i would like to have a chart like this one http://shrani.si/?screenshotow31.jpg. but when i create my chart it looks like this http://shrani.si/?screenshotow2t.jpg. first chart is created with some macro so i dont know how is it working but i think the problem is in blank cells because if cell is blank the chart line will go to 0 but i dont whant that :s
View 2 Replies View RelatedExcel 2013 :: Plotting Gaussian Curve Over Bar Chart
Apr 14, 2014I'm trying to overlay a Gaussian distribution on some data. The data is a frequency of particle size diameters, ranging from 200-1000 um (see attached). I'm using Excel 2013.
View 1 Replies View RelatedPlotting Chart With Selective Dates And Data Series
Oct 8, 2013I have a database where I would like to plot graphs from data of different periods and different series.
My current method is to go to the data set formulas and changing data range. The tricky part is that I might skip data series because I am selecting the series required for each chart.
How to do plot the different graphs efficiently and quickly.
Plotting High Low Range Lines On Column Chart
Dec 18, 2013I am trying to generate a column chart with a high-low range overlay so that it looks like error bars. I've precalculated all values but cannot figure out how to add the high-low range lines. The ranges are in the min and max columns.
I tried using custom error bars but it did not work.
Excel 2003 :: Ignoring Null Values When Plotting Bar Chart?
Jan 21, 2014I have some data that I'm plotting on a bar chart and I'm trying to "HIDE" the columns with zero or null values. Basically, if the column is blank, I don't want a "gap" on the chart. I'm not getting this to work.
View 6 Replies View RelatedExcel 2010 :: Skipping Empty Cells When Plotting A Chart?
Nov 15, 2010This was so easy to do in excel 2003...However im now using 2010 and i cant figure out how to tell excel to ignore the empty cells for a scatter plot.
View 3 Replies View RelatedPie Chart And N/A Ranges
Apr 29, 2009I am trying to create a pie chart that does not include the data labels if the value is zero. I have researched on the 'web' and have been told if I get a value of #NA then these would not show as they are not considered as a value.
However using the following formula I am getting a result of #NA in the cell but this is still showing as zero in the pie chart and hence the labels.
=IF(ISBLANK(F20),NA(),H20*$H$13)
Named Ranges In A Chart - .
May 30, 2007I have a spreadsheet with 300+ questions in columns (covering 2 worksheets - rows 1 to 5), and the answers to the questions are placed in the rows beneath - column A & B lists who the answers came from.
The idea here is that on a seperate sheet a user can enter a question number (e.g: 1.2OP007) and a graph will update to show the different values given for each person who answered that question.
So, in this seperate sheet I have the question in cell $A$1.
In cell $B$1 I have this formula:.........................
Chart Dynamic Ranges
Jan 20, 2010I have a stock chart that I want to update dynamically if the data record length changes. From the source data menu, I tried to use the following data ranges:
=OFFSET(Candles!$AB$8,1,0,COUNTA($AB:$AB)) ---> Date, x values
=OFFSET(Candles!$AD$8,1,0,COUNTA($AD:$AD)) ---> High
=OFFSET(Candles!$AE$8,1,0,COUNTA($AE:$AE)) ---> Low
=OFFSET(Candles!$AF$8,1,0,COUNTA($AF:$AF)) ---> Close
When I place any of these in the data range box under 'x axis labels or values', I receive the message "This function is not valid".
The MS webpage at http://office.microsoft.com/en-us/ex...098011033.aspx describes using these formulas but they don't appear to work.
Using VBA To Update Chart Data - 2 Ranges
Dec 14, 2012I am making a macro to update the data on a bunch of charts. This is what I got from the macro recorder when I selected the data manually.
Code:
Sub testthree()
ActiveWorkbook.Charts("Julian's Words").Select
ActiveChart.SetSourceData Source:=Sheets("Super Sight Chart Data").Range( _
"C1:H1,C5:H5"), PlotBy:=xlRows
End Sub
I have created the part of the macro that will go to the data table and define the two ranges I need to use.
Code:
Sub Adjust_Graphs()
Dim lastdate As String
Dim daterange As Range
[Code] .....
However, this code is selecting the entire range C1:H5. How can I get the code to take JUST the two lines I need?
Exmaple: The X axis needs to be C1:H1, and the Y axis needs to be C5:H5.
I also tried this, without success:
Code:
Dim combrange As Range
Set combrange = Union(daterange, wordrange)
ActiveWorkbook.Charts("Julian's Words").SetSourceData Source:=Sheets("Super Sight Chart Data").Range( _
combrange), PlotBy:=xlRows
Dynamic Ranges In 2007 Chart
Jul 24, 2008I created a chart in Excel 2003 which relies on dynamic named ranges. For years this chart has been working beautifully. I recently converted to Excel 2007 and the chart no longer understands the dynamic named range for the x-axis. It understands the y-axis dynamic named ranges just fine. I have tried renaming the x-axis range to various names (none of which contain the word chart). I also experimented by just using a static range name. And I have tried recreating the chart from scratch with the same results. It lets me create the chart initially but then when I refresh the worksheet, the x-axis is blanked out.
View 9 Replies View RelatedMultiple Non Adjacent Ranges For Chart
Aug 22, 2007I am generating a chart through a macro. I am using 4 non adjacent range and the end point of the range is represented by a variable as the end point is not fixed. I am using following code.
Row = 5
StartPoint1 = "C19"
EndPoint1 = "C" & 19 + Row
StartPoint2 = "E19"
EndPoint2 = "E" & 19 + Row
StartPoint3 = "G19"
EndPoint3 = "G" & 19 + Row
StartPoint4 = "I19"
EndPoint4 = "I" & 19 + Row
ActiveChart.SetSourceData Source:= Sheets("Summary").Range( _
"StartPoint1:EndPoint1,StartPoint2:EndPoint2,StartPoint3:EndPoint3,StartPoint4:EndPoint4"), PlotBy:=xlColumns
Excel 2007 :: Chart Created Using Name Ranges
Jan 28, 2013I have built a chart using dynamic nameranges. The problem that I am facing is I tested it on two systems . One system the charts works fine but the other system the charts does not work . Both are excel 2007. Now the error that I get is if I see the chart data source from one system it is showing "!". The other file shows the chart data source as "0!". What should I be checking so that it works in the other system as well?
View 6 Replies View RelatedDynamic Chart/Graph For Changing Ranges
Apr 25, 2008I have a database in excel with a lot of tables in which lets a uses a combo box so the user select can view just one table.
I want to be able to create a macro so when a button is pressed, it copies the data into a new workbook and creates a chart so they can do whatever they want without disrupting anything in the original workbook.
I have been able to find code that will export the data and create a chart (see below) but the problem is the range changes from table to table so I need to find a way of changing how the chart picks up the data range.
Sub Chart_New_Book()
Sheets("Temp").Select
Cells.Select
Selection.Copy
Workbooks.Add
ActiveSheet.Paste
Range("A1").Select
Charts.Add
ActiveChart.ChartType = xlColumnClustered
ActiveChart.SetSourceData Source:=Sheets("Sheet1").Range("A1:C10")
ActiveChart.Location Where:=xlLocationAsObject, Name:="Sheet1"
End Sub
So at the moment when charting ony cells A1:C10 will be plotted no matter what the size of the table is and making the target range bigger only sees the blank cells being plotted.
Create Chart Using Dynamic Named Ranges For Series
Jul 27, 2012I've created my dynamic named ranges using the OFFSET function, ex.
="OFFSET(SAMPLE!$D$4,1,0,COUNTA(SAMPLE!$D:$D)-1,1)"
I'm now trying to get my chart to use that range. I read at [URL] .... that I need to make sure my series reference is a fully qualified reference. So I've entered that series reference using the name of the workbook followed by the range name (=2012-PIRS.xlsx!SAM_CLAR2DEL). I have two copies of my workbook (one as xlsm with VBA project, and one with xlsx without VBA) and I can't get Excel to accept the series value in either workbook.
ERROR MSG:
The formula you typed contains an error. Try one of the following:
- Make sure you've included all parentheses and required arguments.
- To use a function, click Insert Function on the Formulas tab (in the Function Library group).
- If you include a reference to another sheet or workbook, verify that the reference is correct.
- If you are not trying to enter a formula, avoid.........
Setting Column Chart Data Using VBA For Variable Ranges
Mar 10, 2014I have some code to plot a column chart of data but it isn't working as expecting at the moment. The code is below. The variable binCounter is a count of how many cells in a range that I want to plot on the chart.
However, what I am finding is that the first couple of cells in the range appear as the series name with the rest appearing as the data in the chart. Secondly, the chart appears with the axis labels 1,2,3 etc when I have some custom ones I would prefer to use. How do I go about setting this property, as I can only find options on setting the axis title There is a lot of stuff on XY charts on Google but I can't find much on column charts unfortunately .
VB:
'activate sheet and chart
Worksheets("Home Page").Activate
ActiveSheet.ChartObjects("Histogram").Activate
'set variables for chart
With ActiveChart
[Code] .....
Calculating Chart Values Over Large Ranges With Catagories
Nov 4, 2008I am working on a custom log file for my company. It has 3 sheets and on each sheet is a service type column with drop downs and next to it an amount coumn. Every day that a service issue is requested someone goes in and chooses the service type from the drop down and enters the amount in USD. I want to add charts to the top of each sheet and on the axis i want to have service type and then the total amount spent on that catagory.
View 4 Replies View RelatedCharts - Line Chart, Show Data Ranges?
Jan 5, 2009I have created a line chart that plots weight of a person, but want to show on the plot area what a certain range of weight represent, Ive attached images to show this concept.
View 4 Replies View RelatedChange Chart Data Series (rows) Using Named Ranges?
Mar 13, 2013I have a chart in a workbook that works fine by looking at the following data series:
=Workings!$A$2:$C$35
In the data series above...where the numbers are 2 and 35 I have named ranges "CHART_Start_Row" and "CHART_End_Row" which will change dynamically as appropriate and can replace these static numbers - but how do I incorporate these named ranges into the data series reference?
Data Plotting
May 13, 2008how do I plot the axis data in my graph in an increasing order, when I have my datas in a random order?
In other words, I have bunch of data to be plotted as my x-axis. All numbers are within [0;1], but they all in a random order, like (0.001, 0.923, 0.120, ...). And I want them to be in an increasing order.
Graph Plotting...?
Jul 12, 2009I use spectrometer in my reesearch. The datas are in (a, b) format in single cell. Is it possible to seperate a and b seperately? like a in seperate cell and b in seperate cell?
View 4 Replies View Related
