I've got a column of dates (lets say AJ20:AJ40). And in another column (lets say BK20:BK30) I have some text like 'AJ13' or 'AJ35' or such. So would it be possible to have the cell with AJ13 written in it to be replaced with the date that's in cell AJ13? I've been trying for half an hour but can't figure it out!
View 4 Replies
i want a formula reading the value of a cell and then using it to insert the value of another cell. example:
125 =s125
289 =s289
I have number in cell (A1) = 100. when I enter number in any cell of column(B) for example (B1)=10. then in cell (C1) the result of (A1) - (B1) = (90) and if I add in cell (B2)=10 then in cell (C1) the result of (A1) - (B1+B2) = 80 .accumulatively in cell (C1). and any number in column (B), the result will be (A1) minus any number in column(B) accumulated in (C1)
second question
I have number in cell (A1) = 100. when I enter number at cell (B1) = 10 then the result would be in the adjacent cell (C1) = (A1) - ( B1) = 90 and If I enter a new number in cell (B2) = 10 then the result would be in the adjacent cell (C2) = (A1) - (B1+B2) = 80 and If I enter a new number in cell (B3) = 10 then the result would be in the adjacent cell (C3) = (A1) - (B1+B2+B3) = 70 and so on. I want the result to be add automatically to adjacent cell in column (C)
I need my macro to stop running 5 rows before an empty row. I have numerical data in cell BE, and a running summation of the numerical data in cell BI.
The last 4 rows of the group of data are subtotal/total rows, followed by an empty row separating this group of data from the next.
I would like the summation to start at the row of my active cell and continue to populate column BI with the running summation of column BE, but stop 5 rows before an empty row at the bottom of the group of data.
I would like point to a cell in a spreadsheet, click a Command Button and copy the content of this cell to another cell, say D30.
View 2 Replies View RelatedNeed the syntax for labeling a cell. I want to temporarily label two cells in the same column. Then I'm hoping to use those labels as the start and end points for a range using the script...
View 6 Replies View RelatedI've created a button that, when clicked, will give a time and date stamp. The issue I'm having is that when I click the button, it displays the information in the active cell. I've searched for an answer, but keep coming up blank. Here is my macro:
View 5 Replies View RelatedI want a format that does not accept the point and put the hyphen CPF.
I 123456789-10 format and desire that even putting the point, leave the cell in this format 12345678910.
I know I could use the replace function through the ctrl + l, most wonder if there's no way to customize the cell.
My basic problem is I compile a newsletter for my company. Many people write me E-mails and i paste their "daily accomplishments" into a template. My question is if there is an easy way to insert bullets at the beginning of each line inside the cell. My company wants it prepared with a certain type. I am attaching a sample.
View 2 Replies View RelatedI have a very long if function that takes a value froma cell and then totals the row up to that point.... Is it possible to make this shorter? I have tried to put a sum function in there but that also comes with the nested functions have been exceeded error message...
=IF($S$8=12,P11+O11+N11+M11+L11+K11+J11+I11+H11+G11+F11+E11,IF($S$8=11,O11+N11+M11+L11+K11+J11+I11+H 11+G11+F11+E11,IF($S$8=10,N11+M11+L11+K11+J11+I11+H11+G11+F11+E11,IF($S$8=9,M11+L11+K11+J11+I11+H11+ G11+F11+E11,IF($S$8=8,L11+K11+J11+I11+H11+G11+F11+E11,IF($S$8=7,K11+J11+I11+H11+G11+F11+E11,IF($S$8= 6,J11+I11+H11+G11+F11+E11,IF($S$8=5,I11+H11+G11+F11+E1,))))))))
This one stops short, as it should continue down to $s$8=1.
When a user clicks a cell in Column A, VBA will enter the date in the cell (in the form MMDDYY) and will position the insertion pointer at the end of the date. The user can then enter a four digit number following the MMDDYY. In this worksheet, Column A holds a transaction number, which is always in the form MMDDYYXXXX. I am trying to save the user the trouble of entering the MMDDYY, since it will always be today's date.
View 3 Replies View RelatedI'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A
B
C
D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
I have multiple tables like the one in the picture and have to duplicate this code for different known ranges.
View 11 Replies View RelatedI would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
I have a pivot table as shown below which is pretty straight forward however I am trying to create a macro that will automatically change the point name to match the point name in column E then copy that resulting dispaly to another sheet then pick the next point name in line and do the same thing and repeat for 50 rows, so my end result will be 50 pivot tables ready for printing. I can do this manually but I am trying to make it automatic...BTW the point names in column E change everyday but the pivot table supports the name changes.
Option Explicit
Sub PointName()
Dim Ws As Worksheet
Dim Rng As Range, Cel As Range
Set Ws = ActiveSheet
Set Rng = Range(Cells(2, 7), Cells(Rows.Count, 7).End(xlUp))
For Each Cel In Rng
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Ws.Columns("A:B").Copy
Sheets.Add
With ActiveSheet
.Paste
.Name = Trim(Cel)
.Range("A1").Select
End With
Next
Ws.Activate
End Sub
I turned it off for a while and when I turned it back on I am getting an error
Unable to set the _Default property of the PivotItem class
Debugger is highlighting
Ws.PivotTables("PivotTable1").PivotFields("Point Name").CurrentPage = Cel & " "
Is there a way to format cells to where - when you type in a certain person's first name, it will insert something entirely different?
This has seemed to have happened on a computer at work.
In Excel, when I type in "Martha" then tab, or otherwise leave that cell, Martha changes to "Cool"
If I type in anyone elses name - it stays that name. But if I type in "Martha" .. it changes to "Cool" with the bullet and the word Cool.
Looking to have a macro call a subroutine every time it finds a cell meeting specific criteria.
Code in plain english would look like this:
For EACH cell in range A1:BZ500 meeting the following criteria:
Cell value is a date
AND
Cell's date is at least a week or more in the future
AND
Cell background (Fill) = RGB color code: (R:191 G:191 B:191)
DO the following:
Call repeatingsub
I paste new data into a sheet of a monthly report I prepare. For this sheet, the # of data rows change (and is unpredictable) every month. I need the value inside a specific cell that dynamcially moves up and down based on the # of rows for that month (because it's below the rows of data).
So I made a formula to identify the exact cell # every month.
Example:
This month the exact cell is F255 in the "Refi" sheet.
So my formula in the "Summary" sheet cell A1 first finds the cell row # only (255) and since it's always column F, in B1 I have
VB:
="F" & (A1)
This outputs "F255" in B1, successfully identifying the target cell.
Now how do I write a formula in C1 to grab the value from whatever cell is named in B1. (For this month, the value in cell F255 from the "Refi" sheet)
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I have 6 Headings in excel named...
"A" in cell A1, B in B1, "C" in C1, "D" in D1, "E" in E1 and "F" in F1.
There are two projects.
Project 1 has phase A, D & F and Project 2 has phase A, B, C, D & E.
My Specification follows...
1). Take Prject 1 - Which starts from A...in cell A2 I will keyin "A". When the phase comes to an end I will key in the end date of the phase. As soon as I key in the end date in cell A2 Letter D should automatically appear in the cell D2 and when Phase D comes to an end I will key in the end date in Cell D2 which should automatically keyin F in the cell F2. and is the same case for Project 2.
What I'm trying to do is, create a formula that works like vlookup, except I want to return the value of the cell that is a specified number of cells below the looked-up data in a single column array. So, let's say cell A1 reads "Bacon". In B1, I'd like to put a formula which searches the array for the cell that contains "Bacon" and then returns the value of the cell underneath, let's say the value is "Eggs". Then in C1, I'd like to put another formula which also looks up "Bacon" in the array, then returns the value of the cell that is down two cells from the cell that contains "Bacon", let's say the value is "Milk". And then in D1, a formula that returns the value 3 cells below "Bacon", and so on. All the values here will be text, and not sorted in any specific order. I'll be using Excel 2010.
Please take a look at the attached sheet if it clarifies things.
In my excel workbook, I have a customer table and invoice sheet among many others.
As part of my system, there is functionality to grant new customers with a discount on the first purchase. Within my customer table, the last two columns are "Number of Purchases" and "Customer Type" (either single/multiple depending on no. of purchases), which are then used to determine whether the discount is valid or not on the invoice.
Once an invoice has been created, archived and refreshed with the customer selected (via a Customer ID), I would like some code to auto increment the number of purchases on the Customer table for that specific customer to +1.
For example, customer called Bob (Bob-1);
Number of purchases = 1
Customer Type = Single
Discount = Yes
Invoice then created for Bob (using Bob-1 as the unique value), sent off and refreshed. New figures should be:
Number of purchases = 2
Customer Type = Multiple (can be achieved by using IF statement on No. of purchases)
Discount = No
I would like to know how to use a VBA code to insert today's date into a specific cell (B9) when any cell in column B (B2:B8) has changed.
View 3 Replies View RelatedI'm trying to copy data from one excel sheet to another excel sheet. However, the data to be copied is dependent on the 'client name'.
To explain this further, in the first list I have a detailed report on our clients and the services provided to every employee of that company/client.
However, the sheet two only needs the names of the employees that belong to a specific client.
This can be done manually by setting a fliter on the name of the client/company, but I need to be automated. To ensure only that specific company/client company's employee name is copied.
I've done the following:
Sub BrownBH()
If Range("Brown!B4:B31") = X Then
Range("C4").Value = [#A]
Else
Range("C4").Value = NT
End If
End Sub
However, this doesn't even work.
When somebody enters an X in a specific cell on one worksheet, it's supposed to change the value to A of a specific cell in a different worksheet. Sounds simple enough...but...
I'm trying to search through multiple worksheets (that are closed) to see if a value in cell B12 (of every worksheet) matches a value in a seperate worksheet (which is in a seperate workbook)
View 14 Replies View RelatedI need to change the color of a specific cell when conditions are met in a different cell and it seems like it may be beyond the scope of simply applying conditional formatting. What vba code would look like in proper syntax to make the following statement true. IF cell value Q4 is >=cell value S4 AND cell value R4 is <100 Then cell Q4 turns red and IF cell value Q4 is >= cell value S4 AND cell value R4 =100 then cell Q4 turns green. it may also be useful to know that the "cell values" in this example will be dates and not straight values. this may be possible to do using conditional formatting, but i cannot find a formula that works.
View 2 Replies View RelatedCan I get a formula for the below specification.
if a cell contains character A THEN multiply by cell B * 0.02,if a cell contains character B THEN multiply by cell B * 0.05,if a cell contains character C THEN multiply by cell B * 0.010
I am trying to create a macro that will allow a user to click a button, enter a text string that will be an email address into a field and have it added to the first empty row in column A or column C on sheet 1. I have not been able to record this with the macro recorder. The input box will be in cell E9 on sheet1.
View 7 Replies View Related
