Pulling Data From Previous Cells When Entering Repeated Name
Oct 12, 2012
Margo
12/12/86
188478007
7/19/12
801
Anthem BC/BS
Margo
12/12/86
188478007
7/31/12
806
Anthem BC/BS
[Code] .......
I have this info on my excel spreadsheet plus 500 more lines. What I am looking for is if a name repeats then the info in column 2, 3, 5 and 6 for that name needs to be brought to new row. Example would be if I used the name karen on the next row then I would like her info from the desired cells to auto populate so I don't have to keep entering them and so on with new and old names. I have been trying to get this done for months know and have had no luck. My sheet already has over 500 lines of names and it would be nice if I could use the data from the past as well as the future to populate these cells.
View 5 Replies
ADVERTISEMENT
Jun 16, 2014
I've already entered a variation of the formula below into 180 different columns. The only variation is where worksheet 322 is referenced. Each column references a different worksheet.
Formula:
I have at least four other tables to build of the same size, and they're each going to use this same formula with an additional IF formula housed around it. Ideally I would be able to copy the table, then run find/replace, where I could substitute = with =IF(new formula, and then run find/replace a second time and sub ))) with ))),more new formula). The problem of course is in between those steps lies a formula error preventing me from running the second step. The only alternative I can think of is to build the new formula, copy it into a word document, and run find/replace 180 times to tailor the formula for each column. That's what I did to build the first table.
View 8 Replies
View Related
Aug 19, 2009
I'm building a database which I intend to upload to an ecommerce website. I am retrieving information on some of our products from the manufacturer's website. The information appears on the manufacturer's website as follows:
Part No : DP9970
* Description : Disc Pads
* Manufacturer : Trupart
* Unit Of Sale : Boxed Set
* Width (mm): 130
* Height (mm): 62
* Thickness (mm): 19
* Note: 4 pads with top clip
When I copy and paste this info into excel, it gives each individual line of information a separate cell. I need the information to appear in one cell in order for it to display properly on my website.
View 4 Replies
View Related
Oct 4, 2007
Can I add something to a cell and have it so it does not print?
I need to mark certian cells to have data filled in, in those cells. However if data is not put in those cells I need them to be blank when printed.
Example:
I can put text in B7:
Enter Name Here
Then the user knows to put the name in that spot. If there is no name to be entered then I want to be sure that is not printed when I print the list.
Is any of this a possibility without putting 33 different labels on the page, which is one way. Or 33 different comments on the page, another way.
View 9 Replies
View Related
Mar 1, 2014
I am caught in an areas where I have learned how to find the next available empty row by going far down my worksheet, counting up until I reach a filled row and then offsetting that value by 1 as seen here below:
NextRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
My difficulty lies in assigning the cells in this empty row the data a user can input in my text boxes; let's say there are 4 text boxes which need to be put into the following cells:
Text box 1 (Text value) needs to be assigned next empy cell in column: AText box 2 (Text value) needs to be assigned next empy cell in column: B (1 offset away from A)Text box 3 (Numeric value) needs to be assigned next empy cell in column: F (5 offsets away from A)Text box 4 (Numeric value) needs to be assigned next empy cell in column: H (7 offsets away from A).
How would I go about using my identified "NextRow" and then plug in these text box values into their appropriate cells down that row?
View 6 Replies
View Related
Jun 22, 2013
In VBA I'm trying to grab numbers from a cell range (ie: A1:A10), and save them to a matrix or variable. I will later need to grab additional numbers and add it to that matrix. I have experimented several different ways, but belows demonstrates what I'm trying to do:
VB:
my_data = Range("A1:A10").Value
my_data = my_data&Range("B1:B10").Value
View 2 Replies
View Related
May 14, 2014
I am tracking 3 different payment types, and the employee, customer and dollar amount for the transactions that can not be verified. All of this data is then transferred over the the "Summary" sheet. I found the Countif formula that will tell me how many times an employee names appears on the sheet, but I was wondering if it were possible to also calculate the dollar amount associated with those transactions.
I have attached the spreadsheet to better explain what I am talking about, but below is a very small example. I do not want to calculate the info on this page, but rather add another 2 cells next to where the number of unclaimed and the % of unclaimed are calculated on the "Summary" sheet. Sample spreadsheet2.xlsx
A B C D
1 Date EmployeeCustomer $
2 1-Jan MonicaJohn Doe $65.00
3 2-Jan AshleyJane Doe $85.00
4 3-Jan MonicaJustin Doe $15.00
5 4-Jan MonicaJessica Doe $135.00
6 5-Jan AshleyJeremy Doe $100.00
7 6-Jan CheriJustine Doe $50.00
8 7-Jan CheriJace Doe $450.00
9 8-Jan JudyJackie Doe $50.00
10 9-Jan MonicaJake Doe $65.00
11 10-Jan JudyJennifer Doe$85.00
View 11 Replies
View Related
Jan 23, 2014
In earlier versions if I used the double clicked the autofill handle it would only fill down to the next adjacent cell containing data. Now it fills down to the bottom of all the data regardless of whether there is a blank cell or not e.g
X X X Z
X X X Z
X X X Z
X X
X X X
Now this happens
X X X Z
X X X Z
X X X Z
X X ...Z
X X X Z
How can I stop this as I need to enter different data in the next section?
View 1 Replies
View Related
Apr 9, 2012
see the example below...
ABCDE1blueblue2greengreen3redred4purplepurple
I basically want column E to check the cells from left to right and display the value that is in the first populated cell. For example, cell A2 is blank, therefore, it should display the value from B2. A3 & B3 are blank, so E3 should display the value from C3 and so on...
Is this an "IF" statement?
View 2 Replies
View Related
Jan 4, 2010
In colmn A:A i need returned, which numbers (if any) are repeated and how often each repeated number occured.
Admitedly... I'm lost on this one.
View 2 Replies
View Related
Jul 7, 2013
I am trying to get two cells to be used to adjust other cells on the same sheet repeated times.
In a inventory sheet I have 5 columns as such , A1 previous balance, B1 Qty received, C1 qty on hand, D1 last cost, E1 current avg cost What I want, is to be able to enter my weekly received items in the B1 Qty received and the new cost in D1 Last cost cells and have them calculate my current average E1 and update my qty on hand C1 total. This in itself is not the biggest challenge. I was asking if there is a way that after the E1 current average cost and C1 qty on hand are updated by that formula, that the next time I enter a new B1 qty received and new cost in D1 Last cost cell they will update again basically without changing the earlier calculations achieved .
Example: Today I have item X with a A1 previous balance of 10 , with a D1 last cost of $1, and E1 current avg cost $1
I want to receive B1 10 more today at $.50 D1 last cost, which ideally would end up showing
A1 previous 10 (or 20 if adding) , C1 Qty on hand 20, D1 Last cost .5, E1 current avg $.75
Next week I want to receive B1 10 more at $.25 D1 last cost , which then would update showing
A1 previous balance 10 (or 30 if adding), Qty on hand 30, Last cost $.25 and E1 current avg $.58
View 4 Replies
View Related
May 18, 2007
how could i clear repeated cells contents of one column with code suposing that there are some blank cells between the first empty cell and the last?
View 8 Replies
View Related
Feb 9, 2009
In my excel sheet i have few results displayed in range (same row different column with few banks cells in between). No i wish to display the most repeated value / result from that range into another cell on a different sheet of the same workbook. Can somebody help please.
Please note that the data (that is displayed in the cell rage from where i wish to get the most repeated one) is a the result of a nested IF statement.
16 minutes ago
View 14 Replies
View Related
Jan 17, 2008
Is it possible to associate a range of cells containing different information based on like values in other cells?
Example:
How it currently appears in spreadsheet
Name Acct#
John Q. Public 12345
John Q. Public 23456
John Q. Public 34567
John Q. Public 45678
Jane Example 11111
Jane Example 22222
Wanted Result
John Q. Public 12345 23456 34567 45678
John Q. Public 12345 23456 34567 45678
John Q. Public 12345 23456 34567 45678
John Q. Public 12345 23456 34567 45678
Jane Example 11111 22222
Jane Example 11111 22222
I know how to remove the duplicates afterwords to get one unique record.
View 4 Replies
View Related
Jan 16, 2008
I have a spreadsheet (>10,000 rows) with data referring to a grid cell map. Each grid cell on the map has an ID and associated data. About 10% of the grid cells have duplicate records, but with different data. I need to produce a spreadsheet with a single record for each grid cell that contains the data from each of the duplicate grid cells. Some occurrences may be >2. Example below.
Current
[TABLE]Grid#;Data
1;a
1;c
2;b
3;a
4;b
4;c
5;d
5;d
5;f
[/TABLE]
Needed
[TABLE]
Grid#;Data1;Data2;Data3
1;a;c
2;b
3;a
4;b;c
5;d;d;f
[/TABLE]
View 6 Replies
View Related
Oct 27, 2009
I have excel data containing in column A "Plot number" which is repeated and other four column is land area and the next column is "Land Owner Name". Now I want to merge same plot no if the land area is same if differ then I want to leave as it is. And another thing I want to do that the all land owner name is merge in a row.
View 8 Replies
View Related
Nov 10, 2006
In the sample file attached, I want to do a lookup with the employee id in the master sheet and find the multiple results in the "open_text" sheet. From there, I want to display the open text results in one row per employee on the master sheet. If there are multiple comments, then the results will be displayed in separate cells to the right of each other (filling comment1 through comment5 if needed).
My main goal at the end of this is to be able to do a mail merge out of the master file. This is why I want the results in one row per employee.
View 9 Replies
View Related
Mar 12, 2014
I have a column of values, and I want a column next to it that shows the value in every second cell in the first column, but right underneath. See below for an example of what I am trying to achieve. The actual column is 17000 cells so I cant do it manually.
12
24
36
48
510
612
7
8
9
10
View 5 Replies
View Related
Jun 20, 2014
Suppose I have the following data in column A from A1 to A12
Pass
Pass
Pass
Pass
Exceed
Fail
Fail
Exceed
Pass
Pass
Fail
Exceed
I want two formulas one to count the how many times the following pattern of data have been repeated in the range:
1- Exceed after Pass
2- Exceed before pass
View 3 Replies
View Related
Mar 31, 2014
I have simplified this spreadsheet from the original to get to the core of what I want it to do. There are three tabs: 1) tab:"query fields" is an area that places data that is retrieved from the web, in this case it retrieves tables from yahoo finance given a ticker input. The ticker input cell is currently on the "score card" tab. 2) tab:"score card" in this tab you can input a ticker symbol in the indicated box and it will populate the "query fields" with corresponding data. This tab also extracts certain fields from the retrieved tables and performs a pass/fail test then produces a score %
This is great if I'm doing one symbol at a time, however I eventually would like to 'loop' this process such that a score field is populated for a list of tickers, hence tab 3) "list". Ideally I'd create a control button to initiate the web retrieval process and it would go down my list, retrieve the table data, perform the pass/fail tests, then populate the corresponding score % in the cell next to the ticker symbols. I know I can keep running separate web queries for specific symbols, but I guess my secondary goal is to have this be as dynamic as possible, since the ticker list will change and the list could be sizable at times.
CSH- web query.xlsx
View 3 Replies
View Related
Jan 3, 2008
I have a list that I want to show in a drop down box. The list is like this;
MPK4
MPK4
MPK4
MPK4
MPK4
SPC600
SPC600
SPC600
SPC600
SPC600
SPC600
SPC600
WK-7
WK-7
WK-7
WK-7
WK-7
WK-7
Can a drop down box be made to only show each item 1 time?
View 9 Replies
View Related
Sep 7, 2006
Rows 1 to 12 of the attached .jpg file shows the format that I receive from a University. However, in order to check enrolments, etc., I would prefer it to be in the format as shown on rows 15 to 19, that is, one complete student record per row.
As you can see, not all students are studying the same number of subjects and the subject mix is also different.
View 4 Replies
View Related
Jun 27, 2008
formula using if's and vlookup's to populate a calendar with x's for day a person is gone. however the last couple of people that are gone are not being marked on the calendar even though i use the exact same formula (except for cell numbers and such) for previous, working entries. Here is my formula
View 9 Replies
View Related
Sep 3, 2013
I want the user of my excel sheet to define a certain area For example range 1:
In cell A1 he enters = 5
In cell B1 he enters 10
Beginning with C1 excel should colour the cells C1, D1,...,H1, because the area has the lenght of 6. Colour could be yellow.
For range 2:
The same in the cells A2, B2, ...
View 9 Replies
View Related
Jun 25, 2014
I am finding it very difficult to extract the Project reference data for each employee, I have attached sample working file for reference.
For Example
I have a project names in Rows and Employee names in Columns and each employee fill the working efforts in multiple projects and i would like to extract which all project they have worked for each month. Since the data is very huge i am not able to progress fast in collecting the data
Project NameEmp1Emp2Emp3
A
B 1015
C
D 2012010
Working.xlsx
View 5 Replies
View Related
Jul 10, 2014
I have a VBA code that pulls a value from a single cell on a separate tab. Instead of just pulling the value (ex. 3.44589348) is there a way to have it pull the value as a link to the other tab? It still would display the number but if you click on the cell it would display =Sheet2!A1 (for example).
View 4 Replies
View Related
Feb 10, 2009
My goal is to create a pair of validation lists. The first will allow you to select what craft you are using (i.e. Alchemy). That will bring up the second list which will allow you select what recipe you are using (i.e. Black Ink). From here, I want the spreadsheet to automatically fill out what ingredients are in the recipe, the skill levels needed to complete the recipe at 100% success, and what the yield is each time successfully complete the craft.
The first part is easy, using the INDIRECT function to pull up a second list from the first. I have no idea how to make the other cells fill out, or even how to structure the data to make it accessible.
View 5 Replies
View Related
Jan 29, 2010
I am adding a sheet with a graph I made. There are two sheets, the first with the graph, the second with tables. What I would like to do is populate the graph based off what is entered into the tables. My main goal is to get the cells in the cells in the graph for each day to fill in color between the given time frame entered in on the table. Obviously I would be rounding up or down to make the time end in ":00."
The color I would like to fill the graph with is shown on the graph sheet. Also, if anyone can actually get this to work (I honestly wouldn't know where to start) Is there a way to have multiple colors and a possible overlay of colors?
Lets say on tuesday I have 10:00-15:00, and 12:00-18:00. Can I have two colors populate the cells and a thirs color populate the cells in the overlay which would be 12:00-15:00?
View 4 Replies
View Related
Nov 19, 2007
the code of how do stop saving a report if the spefic cells are not filled.
For ex: In a excel sheet in we have A1,A2,A3 there should be some values else its should not save and should show an alert stating that this cell is empty....
View 9 Replies
View Related
Apr 23, 2008
I have an excel sheet which has a macro which captures the current time in a cell with the formula =now(). What I am looking for is that once a user runs a macro and the time is inserted into that cell then that cell should be locked and cannot be changed then. If this can be done by any formula / function or VBA.
View 2 Replies
View Related
