Copy Images From One Worksheet To Another Depending On Matching Cell Value In Row?
Jul 22, 2014
I am trying to copy images from one worksheet (master worksheet with all data and images) if a cell value matches and place onto a separate worksheet with select rows on it. I've watched this tutorial: [URL], but it only shows how to do it in one cell rather than a whole column.
Essentially if the figure in column A matches in the second worksheet, I want the row data to be duplicated including the image.
For the copied data from the master worksheet to another, I used VLOOKUP and it works great but obviously that won't work with images.
View 3 Replies
ADVERTISEMENT
Feb 10, 2014
I have 2 worksheets, 1 with a table sorted like this (in a row):
component | start date | end date | assigned to
Second worksheet with a table like a calendar with dates and people (dates in the columns and people in the rows), every component is assigned to each person by dates.
............ | 01/01 | 02/01 | 03/01
---------|----- --|-------|-------
person 1 | comp1 | comp1 | comp2
-------- |--------|-------|-------
person 2 | comp1 | comp1 | comp3
I want the assignment from worksheet 1 to worksheet 2 to be automatically. i will set the start and end date next to the component in the first table and assign it to a person/s and it will be automatically get filled in the second worksheet (the calendar) under the person/s and under the same dates as set in the first worksheet.
You can see a template here: [URL] ........
View 9 Replies
View Related
Feb 20, 2014
I have two worksheet "ABX" and "ACX" from which I want to find the matching data for specific columns B, D and E only.
Matching data will be in sheet "Match" and vice versa.
Data are present dynamically.
View 1 Replies
View Related
Jul 25, 2009
I want to add borders to a range depending on the value in the "a" column. Normally I want a left border in cell "a", a right border in cell "h" and bottom border in cells "a" to "h". However if the value in cell "a" is the same as the cell below I do not want the bottom border.
Cell "a" contains the names of customers using our facilities each day. Some customers use several facilities on the same day. I want the borders to encompass all facilities used by each customer per day e.g. range "a1:h8" might need bottom borders on all rows, because they are single customers using only one facility that day but ranges "a9:h11" would require bottom borders only on row 11, because that customer is using three of our facilities that day.
Set Rng = ActiveSheet.Range("a:h").SpecialCells(xlCellTypeConstants)
change the Range to "a:h"
and:-
With .Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
With .Borders(xlEdgeRight)..........
View 5 Replies
View Related
Aug 11, 2013
I use the following codes to copy a cell which contains a picture and paste it to another worksheet. I think these codes copy more than just the picture.
Since pictures in Excel are not associated with cells, how do I copy just the picture in a particular cell and how to determine the size of the picture?
These codes are in a for loop.
Code:
tempCell.Offset(0, -1).Copy
Workbooks(fileName & ".xlsx").Activate
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).Select
Sheets(1).Pictures.Paste
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).RowHeight = tempCell.RowHeight
View 3 Replies
View Related
Nov 12, 2006
I have 2 worksheets in excel.
1. No. Description Code Req Unit Amount
1 Description 591032 1 pc ?
2 Despription 614804 25 pcs ?
etc.
2. No. Code Description Unit Qty Items Amount
1 591032 Description pc 1 84.30 84.30
2 614804 Description pcs 25 0.89 25.25
etc.
I would like to copy the amount in worksheet 2 to paste it to worksheet 1, by searching using code value. Advice: the codes are in different places in worksheet 1 & 2
View 3 Replies
View Related
Sep 15, 2007
I have used marcos to create two worksheets and need to compare each row of the first three columns in each worksheet to find any rows which non-matching data. I am comparing retrieved data (Worksheet1) against a master list (Worksheet2) to ensure the retrieved data was entered correctly. The three columns of data include Manufacturer, Lot number and Date.
The row in which the matches will occur is random. The three values from the retrieved data only have to find a match somewhere in the master list. I can place both the retrieved data and the master list side-by-side on the same worksheet if that would make things more efficient for running the comparison.
The non-matching rows, if found, will be copied over to another worksheet along with its corresponding row in columns "D" and "E" found in Worksheet1. The additional data alerts me to the location where the data was entered incorrectly. The master list does not have any location data in it.
View 5 Replies
View Related
Apr 18, 2008
I have found the following code on this forum that has really worked well. This code matches the first two columns of two worksheets and inputs them into a third worksheet. But I need to be able to copy up to five more columns, a total of seven columns and have it input into the third worksheet. I am not sure what it means "For Each c In Sht1Rng". look at the code and advise me of what I need to do.
Sub FindMatches()
Dim Sht1Rng As Range
Dim Sht2Rng As Range
Set Sht1Rng = Worksheets("Data1").Range("A1", Worksheets("Data1").Range("A65536").End(xlUp))
Set Sht2Rng = Worksheets("Data2").Range("A1", Worksheets("Data2").Range("A65536").End(xlUp))
For Each c In Sht1Rng
Set d = Sht2Rng. Find(c.Value, LookIn:=xlValues)
If Not d Is Nothing Then
Worksheets("Results").Range("A65536").End(xlUp).Offset(1, 0).Value = c.Value
Worksheets("Results").Range("A65536").End(xlUp).Offset(0, 1).Value = c.Offset(0, 1).Value
Set d = Nothing
End If
Next c
End Sub
View 2 Replies
View Related
May 21, 2008
I have some specific requirement and it would be great if I could do it through macro. Also attached a sample excel file for the requirement. I have raw data in a worksheet (WS1) that I receive daily from factory. There is another sheet in a different workbook (WS2) that has format specified on how to display this raw data. The order of raw data on WS1 remains same. The question is that how do I replace the format titles with raw data?
For example, in the attached excel sheet, sheet "data" has list of values. Sheet "format" says how to display data. Sheet "output" is output that I finally want to generate. The sheet "data" will always have data in the same order. I need to read values and replace the format title ( name, age etc) with corresponding values on "data" sheet.
View 5 Replies
View Related
Jan 7, 2009
I have a list of names in column B and either a 1 or 0 in column A as below:
0 A B
1 1 Bob
2 0 Chan
3 0 Lucy
4 1 Billy
On another worksheet I want to be able to list only the names with a 1 in column A. This must be done in another worksheet so I have something like below.
0 A
1 Bob
2 Billy
3
4
View 3 Replies
View Related
Jul 7, 2009
One of the worksheets contains all of the data and the rest are empty. I need to do is move entire rows of from the main worksheet in to worksheets named the same as the value in column C of the row.
for example one row may have TEST in column C so i want to move it to the worksheet called TEST. The next row might have TESTING in column C so that would go to the worksheet called TESTING. and so on.
View 3 Replies
View Related
Mar 10, 2008
Trying to find a code which will insert all images into specified cells.
[url]
All of the images are in a single folder C:/My Documents/Pictures
All are .jpg images which contain the prefix EV_
ie: image1 is called EV_10020003.jpg
image2 is called EV_40B00001.jpg
image3 is called EV_C003001.jpg
etc.
Throughout my worksheet I have cells containing text of an image
ie: in F23 contains the text EV_40B00001
in G50 the text EV_C003001
etc...
My aim would be to use a command button to search through my worksheet (Sheet1) and load up each image to their corresponding cell.
View 10 Replies
View Related
Mar 1, 2008
Using excel and Crystal Ball I generated a workbook that calculates via VBA Value at Risk and diverse financial charts and ratios.
I have a second workbook, the template, where this values are pasted generating a report.
Up to this point the macro works correctly, the problem is that some of the Crystal Ball charts are pasted as images and I dont know how to "handle" this images.
I reached the point where I can paste the image in the template.
I want the macro to:
1) Detect the images in the template worksheet
2) Determine a position and size for each image
View 4 Replies
View Related
Jul 28, 2006
This is the code I have:
Sub Auto_Open()
Sheets("Data").Select
Range("A2:E32").Select
Selection.Copy
Sheets("May").Select
ActiveWindow.SmallScroll Down:=-9
Range("A2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Sheets("Data").Select
Range("A1").Select
ActiveSheet.Paste
Range("A1").Select
Sheets("Sheet1").Select
Range("A2:E32").Select
Selection.ClearContents
Range("A1").Select
End Sub
1) How do I set this up so that if the cell Z1 reads 1, it will paste the data to the "January" Sheet, if Z1 reads 2, it will paste to "February" Sheet, if Z1 is 3 it will paste to "March"......
View 9 Replies
View Related
Dec 10, 2012
As seen from my attached file,
The colour of the percentage cell changes according to its percentage. I would like the S/N cells to have the same colour as the total percentage cells automatically. (Even when the percentage updates)
Secondly, for the cells under "Target", if the target dates are 1 day before today(the current date on a particular day) and the actual date is not filled, the cell fill will turn amber.
If today is on or after the target date and the actual date is not filled, the cell will turn red.
However, if the actual date is filled, the target date cell will be filled green, overwriting the above two condition.
FormattingHelpExample.xls‎
View 2 Replies
View Related
Feb 22, 2009
The rows will differ depending on the Active Cell that's selected and I don't know how to specify this.
The range I want to copy is from Column B to DA on the worksheet ("Staff") which I want to paste to another worksheet ("Leavers"). This is as far as I got
'FindRemove = lstRemove.Value
'If FindRemove = "" Then End
' Goes to the start of the Data column
'Sheets("Staff").Select
'Range("B4").Select
' Tests current cell against FindRemove
'Do
'If ActiveCell.Value = FindRemove Then
'Call CopyPerson
'Exit Sub
'Else: ActiveCell.Offset(1, 0).Select
'End If
'Loop Until ActiveCell.Value = ""
'End Sub
View 9 Replies
View Related
Jun 16, 2009
formula below.
Crude and does not work.
I hope what I have said makes sense and can be written correctly.
'If WorksheetFunction.CountIf(Range("A:A"), Cells(i, 1).Value) > 1 Then
copy.Range("U:U"), Cells(i, 1).Value)=1
Cells(i, 21).Paste.Value.Count > 1
Basically, For Each Value in A that's identical. I need the value in "U" in the row for the first value in A to be copied down to the last row for the specific value in A.
View 12 Replies
View Related
Feb 15, 2007
I have two ranges AA:DD and F:G, I have to find matching pair in AA:DD and in F:G and copy H and add as a comment to D, its hard to explain. see my attached workbook.
View 5 Replies
View Related
Jun 24, 2008
I had a quick look around and couldn't find exactly what I was after my apologies if it already exists. I have attached a sample worksheet and I would like it the entire row A from sheet 1 to sheet 3 if the cells A2 OR D2 contain what is in cell Sheet2!A1.
View 3 Replies
View Related
Feb 1, 2014
I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
View 8 Replies
View Related
Sep 4, 2013
I have two excel sheets with order details.
Sheet1:A1:Order ID, B1:City, C1:State
Sheet2:A1:Order ID, B1:Rate
Sheet 1 only contains successful order ID's In Sheet 2 there are many order ids with pending, failed, successful transactions.
I want to compare Sheet1:A1 with Sheet2 full range Order ID's. If there is a match it should copy B1:rate to Sheet1 D1 and so on. I tried some VLOOKUP formulas but they did not work.
View 4 Replies
View Related
Jan 28, 2010
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
View 9 Replies
View Related
Nov 19, 2009
programming 2 macros in a bank reconciliation sheet I am trying to create.
Basically the data consists of two sets: the ledger side and bank side. Both sides consists of multiple columns that include date, description and amount.
The following two situations can occur and which need to be covered with a macro.
Many to one matching
When we make payments to say 100 different suppliers at once, the ledger side will show 100 lines with the different amounts. However on the bank side it will only show one line with a total amount for the transaction. As the description on the ledger side is the same for all transactions done at the same time, it should be possible to have a macro add these lines and compare the total with entries on the bank side. Once a matching amount has been found, the macro should place an ‘x’ next to all entries on the ledger and bank side, in order to show that these transactions have been reconciled.
Partial cell matching
In this case we are only dealing with one line on both the ledger and bank side. The issue is that the description does not always perfectly match with one another. The ledger side might say ‘Brown Corp.’ and the bank side might say ‘Brown Corporation’. I want to come up with a macro that can recognize this partial match and still reconcile the lines by placing a ‘x’ to both the ledger and bank entry. The match however should be done with a combination of description, date and amount as several different bookings might be done for the same supplier in the same month.
View 12 Replies
View Related
Jun 19, 2008
I am trying to make an inventory table. And I would like to have a column that has the photo of that item inserted into that cell so that I have:
Something like:
Photo --> Description --> Price
Image --> Text --> Text
My aim is to be able to sort the items by price or other criteria. The photos are quite large 600x800 but all i need is a small thumbnail. If it is even possible, is there a way of dragging and dropping or selecting multiple in explorer because there are lots of items.
View 2 Replies
View Related
Jul 17, 2006
Is it possible to have an Image Box which opens different images based on the value of a cell. Say when A1 = 1, the picture of one thing comes up....when A1=2 and different picture and so on?
View 6 Replies
View Related
Aug 28, 2009
I have a bunch of images which I want to be able to display in different cells depending on certain values or conditions. Say for example you have a drop down box with a list of fruits. When you pick a fruit, it displays its picture. Is this possible? If all of the pictures exist somewhere on the sheet, can you reference the pictures to have them appear in a cell rather than having images always "floating" over the sheet?
View 3 Replies
View Related
Jan 4, 2012
I have some arrays to loop through some code which generates some graphs:
Code:
Sub demo()
Dim aServer
Dim aType
Dim i
aServer = Array("a", "b", "c")
aType = Array("1", "2", "3")
[code]....
I am now trying to populate the arrays dynamically and thought I could work that out myself, but this is my first ever time with VBA and it's not as easy as I thought (Or maybe I'm not as clever as I thought!)
I have a table in a worksheet with column headings and row headings which are the values to be added to the array.
Lets say I have the following:
Column headings = "x", "y", "z" (these are the potential aType values)
Row headings= "1", "2", "3" (these are the potential aServer values)
_,x, y, z
1
2
3
The values in the table are either TRUE or FALSE (Or blank which should be interpreted as FALSE). Where there is a TRUE the column heading should be added to the aServer array and the Row heading should be added to the aType array.
In this 9 cell example (Not counting the row and column headings), if the first 2 rows had all the values as TRUE (See example table below) it would therefore result in the following arrays:
_,x, y, z
1,TRUE,TRUE,TRUE
2,TRUE,TRUE,TRUE
3,FALSE,FALSE,FALSE
Code:
aServer = Array("1", "1", "1", "2", "2", "2")
aType = Array("x", "y", "z", "x", "y", "z")
If the table was as follows:
_,x, y, z
1,TRUE,FALSE,FALSE
2,FALSE,FALSE,FALSE
3,FALSE,TRUE,TRUE
It should result in the following arrays:
Code:
aServer = Array("1", "3", "3")
aType = Array("x", "y", "z")
this would work out how many rows and columns there were based on how many column headings and row headings there were (So I wouldn't have to change the hardcoded VBA when the table grows, therefore making it easier to share the spreadsheet with others)
View 3 Replies
View Related
Apr 13, 2009
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click()
Dim r As Long, LastRow As Long, Status As Integer
Dim Message As String, Title As String, Default As String, MyValue As String
Application.ScreenUpdating = False
MyValue = Range("A4").Value
Workbooks("invoice.xls").Worksheets("A").Activate
LastRow = Range("C65536").End(xlUp).Row
For r = LastRow To 1 Step -1
If Cells(r, 1).Value = MyValue Then
Rows(r).EntireRow.Copy
Workbooks("invoice.xls").Worksheets("B").Activate
Rows("8").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Status = 1
Workbooks("invoice.xls").Worksheets("A").Activate
Rows(r).EntireRow.Delete
Exit For
End If
Next r
Application.ScreenUpdating = True
View 2 Replies
View Related
Dec 6, 2007
I have attached a spreadsheet.
I have a dump of about 4000 calls (I have minimised the attachment for size sake) that I need to do certain reports on.
The second sheet (dump) has the data in its raw form from our call reporting tool. The 1st sheet (Report) is a broken down version the powers that be wish to see.
My formula needs to meet certain criteria, as you can see I only have 6 columns on the (Report) sheet where as the dump has lots !
The (report) sheet needs to list the Parent Case ID only if the Summary column has BSR at the beginning, if it meets this criteria then it lists the other relevant columns in the (report) sheet.
View 5 Replies
View Related
Jan 30, 2014
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
View 2 Replies
View Related
