I'm trying to operate on sheets using an array. It is not placing the value found with Countif() into the correct cell in J5.
Dim lCount As Long
Dim mysheet As Worksheet
For Each mysheet In Sheets(Array("Sheet1", "Sheet2", "Sheet3"))
With mysheet
For lCount = 1 To WorksheetFunction.CountIf(Range("F4:F150"), "1")
Next lCount
Range("J5").Select
ActiveCell.FormulaR1C1 = lCount - 1
End With
Next
I have this file, I would like to create a sheet for each different supplier code (column D), and each sheet named with the supplier code.
View 3 Replies View RelatedI'm trying to union two different ranges that exist on two different sheets and then copy the unique values into a third range with just the unique values. I was going to then use the unique range as my rowsource in a listbox. This is the code I was working with so far but i'm getting a compile error (method range of object failure).
Private Sub UserForm_Initialize()
Dim range4 As Range
Dim range3 As Range
Dim range2 As Range
Dim range1 As Range
Set range1 = Worksheets(1).Range("MyRange")
Set range2 = Worksheets(2).Range("MyRange2")
Application.Union(Range("range1"), Range("range2")).Select
Selection = range3
range3.AdvancedFilter Action:=xlFilterCopy, CopyToRange:=range4, Unique:=True
Me.lstone.RowSource = range4
End Sub
I have three sheets: On sheet 1, I have a list of products ( Down ) with Bought and sold info by time period ( Across ). On sheet 2, I have the same list of products from sheet 1 ( May not be in the same order ) with " Attributes " associated to them ( e.g. male, female etc ). On Sheet 3: I would like to add the Bought and sold info by time period on sheet 1 by attribute as per sheet 2
View 2 Replies View RelatedI am relatively new to VBA macros. I am having two sheets, in one sheet I have a non-contiguous 20 rows range and in the other sheet I have a 20 row contiguous range. I need a macro which will compare data between the two ranges(one to one compare) meaning 1st row of the first range should compare with 1st row of the second range and if it matches then it should populate the adjacent column in the second sheet with true or false accordingly.
View 2 Replies View RelatedThis should be a fairly simple question, I've already got the code for copying sorted, I'm just curious about several of the named ranges within the sheet and what happens to them when I copy it all over.
I'm working from a spreadsheet made by my predecessor and they've got a template sheet with numerous named rages all scoped to the workbook, on the new template I've created, it has lots of ranges scoped to the sheet itself. The new template works just fine as it is but I just want to try and make sure that when I change over the templates it will continue to work fine and the current template's named ranges are going, so far I have actually copied everything and are running tests, but you can't test for everything, so if the named ranges on the new template being only scoped to the sheet will affect it at all?
Sub DynaSort()
Dim wsSheet As Worksheet
iRow = ActiveSheet.Columns("A").End(xlDown).Row
For Each wsSheet In Worksheets
Select Case wsSheet.CodeName
Case "Sheet2", "Sheet3", "Sheet4"
wsSheet.sort.SortFields.Clear
Range("A3:I" & iRow).Select
wsSheet.sort.SortFields.Add Key:=Range("F2:F" & iRow) _
, SortOn:=xlSortOnValues, order:=xlAscending, DataOption:=xlSortNormal
wsSheet.sort.SortFields.Add Key:=Range _
("H2:H" & iRow), SortOn:=xlSortOnValues, order:=xlDescending, DataOption:= _ ...................
The problem that I has is that I cannot put focus on a cell after the sort. Xl keeps the columns selected and then when I'm trying to put in the next data Excel selects all the rows in Sheet1 also. I know how to get rid of it and continue, the users on the other hand are not that experienced with excel. fun thing, even thou the, Range.value is inside the IF it putt "pucko" in sheet1. I have a code that copies the data and then put some several functions in each sheet, after that I call the sort routine.
Is there a way to mirror two ranges of data on different sheets - i.e. if I update one sheet, it updates on the second, without using formulas, macros.
View 3 Replies View RelatedThere are two sheets: Sheet1 and Sheet2
Columns in Sheet 1 are the following:
company PERMNO number, dates, market capitalization (no data in this one)
Columns in Sheet 2 are the following:
company PERMNO number, ticker, dates, market capitalization
In Sheet2, there is a whole range of dates (between 1990 and 2004) for every single company, whereas in Sheet2 there is one or 3-4 dates for a every single company.
I would like to match the exact date/dates in Sheet1 in the range of dates in Sheet2 and then if they match, copy the corresponding cell value from the market capitalization column in Sheet2 to the empty market capitalization column in Sheet1. I also want that the company PERNO numbers match.
In short: if PERMNO numbers match, match the date/dates in Sheet1 within the range of dates for the same company in Sheet 2 and copy the market capitalization value to Sheet1.
Example:
Sheet1:
A B C
1. PERMNO DATES MARKETCAP
2. 13123 199803
3. 13123 199904
4. 65456 200005
5. 44550 200104
6. 44550 200211......
I am having trouble with IF, ELSE and END IF statements. In Column H I am trying to copy over rows to sheets based on value according to ranges. I am trying to use the code below but everything seems to get copied in to the first sheet "0-500". d= worksheet name.
View 6 Replies View RelatedI have VBA code that copies over several sheets from a workbook, but I'd rather not have all the named ranges come through. Whenever I run the macro it gives me this notice: "A formula or sheet you want to move or copy contains the name 'rngRegion2', which already exists on the destination worksheet..." The destination sheet doesn't originally have this range already, it runs into problems because the sheets I'm copying have rngRegion2 defined on different sheets. I'd like to try and avoid this problem all together by not copying named ranges if possible.
If thats not a viable option, is there code that I can use to tell it to automatically select "Yes - To use the name as defined in the destination sheet" as opposed to prompting the user to select yes/no?
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Intersect(ActiveCell, Sheet8.Range("C16:Y1000")) Is Nothing Then Exit Sub
Dim rw As Integer
Dim arw As Integer
rw = 16
[Code] .....
As you can see, my code is located in the sheet8 worksheet object. Now, I have a few questions about this. Because I am located in the sheet8 worksheet object does that mean my code can only work in sheet8, i.e., the following won't work because I am in a Sheet8 worksheet object?
Sheet10.Range("B12) = ..... ....... .....
This is not returning a value in Sheet10? My question is how do I make my code return a value in Sheet10?
I need to clear the the text in the same cell ranges on multiple worksheets. on a regular basis.
F7:K13
Q7:Q13
Is there a simple way to do this?
I want the following script to:
1) Find and define a range ("DateRng") based on cell values. This is controlled by the first block and the script does this job correctly.
2) Find cells
Is it possible to form a single Range object from ranges on multiple sheets. So for example, would it be possible to set a Range object equal to cells A1:D146 from Sheet 1 and A1:B49 from Sheet 2 and if so, what would be the syntax? For the first I have:
Sheets("SelectData").Range("A1:D146").SpecialCells(xlCellTypeVisible)
but I wouldn't know how to proceed from there.
I am trying to write what I thought would be a simple macro to print out specific areas of my worksheets. I have shown the code below; the line causing the problem I have highlighted in RED. I am getting the following error message: "Select method of range class failed".
Reading other posts here. I think this may have something to do with the macro being assigned to a command button in one worksheet (AY114) and I am trying to get the macro to run on both the worksheet that the command button is in (AY114) as well as another worksheet (AY062).
Sub CommandButton1_Click()
Range("J2").Select
Sheets("AY114").Select
Range("A4:J53").Select
ActiveSheet.PageSetup.PrintArea = "$A$4:$J$53"
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
ActiveWindow.SmallScroll Down:=45
Range("A56:M151").Select
ActiveSheet.PageSetup.PrintArea = "$A$56:$M$151"......................
I have four sheets workbook, and i'd like to set a command button that prints scattered tables ( ranges) on my workbook but still have a pattern.
I attached a simple wokbook that explains how ranges are positioned in my workbook, i hope that it is possible to print these tables in the sequence shown in the file by a single command.
I have attached the xls. I have an input sheet with 3 columns to enter data. Each column is linked to a separate worksheet with a formula (Carrys 1000 rows long). I need to be able to pull the populated data from those 3 worksheets and paste into 1 column continuously on another worksheet so all data is on top of another without any spaces.
I made an if statement so that if there isn't data pulling from the input sheet the a blank cell is left to indicate the last row to copy data from and paste on the final sheet.
How to accomplish the goal described below.
A , Method of Range Object "_Global" Failed , error occurred upon running the code below at the emboldened statement.
Code:
Sub copytosheet2()
Dim Lastrow As Long, CopyRng As Range, DestRng As Variant, i&
Worksheets("Sheet1").Activate
Lastrow = Worksheets("Sheet1").[A65536].End(xlUp).Row
'
For i = Lastrow To 2 Step -1
[Code] ......
The goal is to loop through columns of data on sheet1 and copy values of cells B-C to the lowest rows on sheet2 column B-C.
Here are the screen shots of sheet1 and sheet2.
I'm using Excel 2010 and would like to know if it's possible to convert selected ranges in multiple sheets into one PDF file? For example, I want to select range("A1:O10) in Sheet1 and range("A1:N25") in Sheet2, then convert both Excel sheets into PDF file with two pages.
View 2 Replies View Relatedi attached link to sample and its contains employee sheets and Report sheet ,and in Report sheet there is comment
[URL]
I've found some code which works to print certain pages with value in cell A1 but I need to print dynamic ranges on some of the sheets as they will have filters on so the rows ranges will be different each time.
So far this is what I have but the dynamic range part is not working:
VB:
Sub Print_All_Worksheets_With_Value_In_A1()
Dim Sh As Worksheet
Dim Arr() As String
Dim N As Integer
[Code] ....
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI inherited a spreadsheet that had an userform where the user checked off which 'pages' he wanted to print. The Ok button routine used if statements to run a routine for each 'page.' Here's an example of the original code for one page:
Sub Button2_Click()
Sheet7.Activate
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.RightFooter = " Construction Assumptions"
.PrintArea = "CONSTRUCTION" 'the named range to print
.Zoom = False
.FitToPagesTall = 1
.FitToPagesWide = 1 'this changes depending upon the page selected
End With
ActiveSheet.PrintOut
End Sub
The problem was it printed each page as a separate print job; and if you print to adobe, you get serveral files, not one file. That and it took a long time to run.
So I tried a different tack. If the checkboxes has true, then the printarea is set to that named range. If there were more than one named range on a sheet to be printed, I consolidated them. I did this with a bunch of if statements - very cumbersome.
Sheet3.Activate
'Sheet3.ResetAllPageBreaks 'disabled due to errors
Run "HorizontalPrintStuff" 'generic landscape pagesetup
With ActiveSheet.PageSetup 'specific pageset settings
.PrintArea = "DEVBGTALL" 'the named range to print
.FitToPagesWide = 4 'this changes depending upon the
.FitToPagesTall = 1
End With
I haven't shown all the code cause it goes on for 12 sheets containing 16 different printareas.
My current muck ups are .....
1) it prints every printarea/named range on a given sheet (I took out all the if statements trying to debug everything.) Is there another conditional argument that allows for multiple 'trues'?
2) the pagebreaks in printarea/named ranges that are multiple pages (like a 48 month schedule) won't stay set. I've tried both VPageBreaks(3).Location:= and .VPageBreaks.Add Before:=
3) the Sheet1.select false argument is always adding a random sheet to the end of the print job. Don't know why.
I can do all this in a recorded macro, just not the selection userform. I've thought about copying to another sheet or hiding columns and rows then printing, but that seems just as cumbersome.
To recap, i want to print out, as one print job, multiple printareas from mulitple sheets, based upon checkbox selection on an userform.
I need to be able to track changes on selected ranges on multiple sheets, but Excel does not appear to be able to do this. It only appears to allow me to select multiple ranges on the same sheet.
is there a way to track changes on multiple selected ranges on multiple sheets
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies View Relateddefinitions for static ranges and dynamic ranges?
View 9 Replies View RelatedI have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.