Filtering Ranges And Copying Results To New Sheets?
Jul 5, 2014
I want the following script to:
1) Find and define a range ("DateRng") based on cell values. This is controlled by the first block and the script does this job correctly.
2) Find cells
View 1 Replies
ADVERTISEMENT
Jun 3, 2009
I have a work sheet with about 35,000 lines of data. Every day I have to sort the list by product category (I use auto filter to separate) and then copy the results into a new worksheet, there are about 300 product catagories. I'm new to macros but I'm wondering if there is a macro that can automate this process.
View 6 Replies
View Related
Apr 9, 2014
This should be a fairly simple question, I've already got the code for copying sorted, I'm just curious about several of the named ranges within the sheet and what happens to them when I copy it all over.
I'm working from a spreadsheet made by my predecessor and they've got a template sheet with numerous named rages all scoped to the workbook, on the new template I've created, it has lots of ranges scoped to the sheet itself. The new template works just fine as it is but I just want to try and make sure that when I change over the templates it will continue to work fine and the current template's named ranges are going, so far I have actually copied everything and are running tests, but you can't test for everything, so if the named ranges on the new template being only scoped to the sheet will affect it at all?
View 2 Replies
View Related
Apr 25, 2009
There are two sheets: Sheet1 and Sheet2
Columns in Sheet 1 are the following:
company PERMNO number, dates, market capitalization (no data in this one)
Columns in Sheet 2 are the following:
company PERMNO number, ticker, dates, market capitalization
In Sheet2, there is a whole range of dates (between 1990 and 2004) for every single company, whereas in Sheet2 there is one or 3-4 dates for a every single company.
I would like to match the exact date/dates in Sheet1 in the range of dates in Sheet2 and then if they match, copy the corresponding cell value from the market capitalization column in Sheet2 to the empty market capitalization column in Sheet1. I also want that the company PERNO numbers match.
In short: if PERMNO numbers match, match the date/dates in Sheet1 within the range of dates for the same company in Sheet 2 and copy the market capitalization value to Sheet1.
Example:
Sheet1:
A B C
1. PERMNO DATES MARKETCAP
2. 13123 199803
3. 13123 199904
4. 65456 200005
5. 44550 200104
6. 44550 200211......
View 9 Replies
View Related
Oct 2, 2009
I have two worksheets in worksheet 1 I have a bunch of data and I want to be able to filter out to only include relevant results.
Eg. If I search for 'Dog' I want search column A in another sheet and find all full and partial matches then display the entire row of each of these matches.
View 6 Replies
View Related
Sep 30, 2012
I am trying to set up a simple sports picking list using Excel 2010. I would like to be able to carry out several filers and then extract results to a new sheet to allow printing.
For example, there are four available terms and I would like to be able to filter by term/sport and student. Ideally I would like to be able to add a command button once this is working.
View 5 Replies
View Related
Jun 16, 2014
How to filter a table according to a value and show a particular column in the combobox?
For example i have a table like this:
[Code] .....
And i want to filter "A" and insert the column 3 values into the combobox list.
Combobox must show Smone2 and Smone4
View 4 Replies
View Related
Aug 19, 2009
I have two Spreadsheets, lets call it Spreadsheet 1 and Spreadsheet 2.
Spreadsheet 1 has a list of partial employee names in column A.
Spreadsheet 2 has a list of 500,0000 full employee names in column A and their phone number in column B and address in column C through E.
Basically what I want to do is do a wildcard search for the partial employee name, so like lookup Spreadsheet 1' Column A's *name* in column A of Spreadsheet 2. Based on the number of matches. I want to insert that many blank rows underneath the partial employee name, and paste those matched rows there, then continue to the second partial employee name lookup and repeat the process.
This loop has to repeat 1000 times.
View 14 Replies
View Related
Feb 4, 2014
I have a spreadsheet of raw data that has been downloaded in Excel. In Column N there are different site numbers.
I want to use a new Sheet for each site. Using a formulae I want to filter the data for each site and then copy the entire row to the relevant site`s page.
So I should end up with a sheet for each page and allthe data sorted correctly?
View 3 Replies
View Related
Apr 25, 2014
I have a file where I have few sheets (link to file below). Sheet zrzut is dropdown from other system - updated daily. Sheet Productivity is filled with data supporting to group data and add conditions (for example column "I" in "zrzut" sheet). Sheet "Vena" has data from "zrzut" based on condition in column "I". Sheet "VENA_PLAN" has the same data as "Vena" but only values - I need only values for other actions. The thing is my current code replaces old data with new, but what I would like to achieve is to have new data stored below old. For now code looks like
Code:
Sub PlanVENA()
Application.ScreenUpdating = False
Worksheets("VENA_PLAN").Range("A3:H300").Value =
[Code]....
View 4 Replies
View Related
Jul 31, 2013
I work with project data.... I have attached a small sample. I will have data across 8 - 10 tabs with respect to costs associated with different projects.
What I do now is go through each tab and set filters based on what project and date range I am looking for ... if I am not careful, there may be other filters previously set that I do not notice and my data isn't accurate and I may spend quite a bit of time reviewing all the filters and resetting as needed.
But, the filtering will be the same across all tabs (i.e. I may want to see all project data for a single month, or I may want to see all project data for a single project across all date ranges.)
is there a way to create another tab which I can identify the desired filtering than can populate across all the tabs? not all the tabs contain the same number of columns of data, but they do all contain some similar columns that represent the typical filtering range.
View 1 Replies
View Related
Jan 23, 2007
I have a workbook that has a sheet for each day of the month. The data on all of these sheets is formatted the same. I have a sheet that is an "overview" sheet. I want to be able to use a filter function (like autofilter does) but have it filter across all of the sheets and display the results on my Overview sheet.
View 3 Replies
View Related
May 27, 2008
what i have is a workbook with 4 worksheets. each is a list of tapes that i use for back ups.
each worksheet has a auto filter so that i can filter by the day i need to use the tape. i.e. when i select monday it displays mondays tapes only.
what i want to do is take the result from this and copy it into another sheet so when i select tuesday it copys onto a 5th sheet in a specific area.
i would also like it to change the day on all sheets filters from a single drop down. i cant put everything on one sheet as there are duplicate tapes and days.
View 10 Replies
View Related
Aug 27, 2009
I'm working on a quote template that has 600+ products with descriptions and prices that gets autofiltered down to one product. After it has been filtered down to that one product how do I link that to a new worksheet?
View 9 Replies
View Related
Feb 27, 2007
In my attached example you can see I have Sheet "Computer" & Sheet "RHN" both have a number of columns, but all I want is to compare Column A of "Computer" with Column A of "RHN" and copy all entires found in A "Computer" and not found in A "RHN" to a new sheet!
View 4 Replies
View Related
Apr 26, 2013
I am doing a project with these instructions:
The state, capital and population of all states with a population greater than 10 million or less than 1 million. (population)
The state, tree and bird of all states with a bird or tree that starts with Eastern or Western (symbols)
The state, population and area of all states with area between 100,000 and 200,000 (area)
I am having troubles with selecting just the three criteria (state, capital, and population) on my Population worksheet. Attached is my work. The copied filter keeps copying all of the data in the data set, and not those three.
View 4 Replies
View Related
Feb 22, 2013
I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.
What VBA functions to use???
View 4 Replies
View Related
Nov 27, 2007
In column C i have dates. I have formula that count all the dates that are older than 20 days. The formula works perfectly. Now i made a Dynamic Named Range of the column A and now the formula results in #VALUE.
View 11 Replies
View Related
Feb 14, 2009
I am trying to copy columns from one workbook to another workbook as follows:
Source workbook column Destination workbook column
c2:c14 e2:e14
d2:d14 c2:c14
e2:e14 d2:d14
f2:f14 f2:f14
g2:g14 g2:g14
The data columns in both the workbooks are of same length,I just want to copy the corresponding columns from source to destination as per above referenced cells.
How do I write a macro for this?
View 9 Replies
View Related
May 25, 2014
i wanna copy C and D columns in Sheet1 and insert these 2 columns (copy + insert copy cells function, not copy + paste) to all other sheets except Infopage sheet
View 14 Replies
View Related
Aug 19, 2014
Is there a way to copy multiple ranges and paste the format in the cells below? I tried to use the Union function in the code below:
[Code]....
I was only getting the first column to paste and I don't like all of the select commands. My work around is a lot of lines for a simple command.
[Code] .........
Attached File : Stringing Chart.xlsm
View 1 Replies
View Related
Mar 24, 2009
I am using Excel 2003. I have a worksheet called "RawData" which has a continuous list of invoices, I need to separate off the first invoice from the rest of the invoices into a new worksheet and call it "sheet1". The number of rows from cell A1 at the top left corner varies and is never constant from invoice to invoice however the last row of the invoice I need to move always includes the text string "NET PAYABLE TO".
So I need to copy all rows from "A1" to the row that has the text to a new worksheet called "sheet1", I then need to delete those rows only from the original "RawData" worksheet, leaving the remaining invoices in "RawData" intact. If it is helpful to you, the first row on every invoice has the text string "TAX INVOICE".
There are no empty rows between the "NET PAYABLE TO" row at the end of an invoice and the "TAX INVOICE" row at the start of the next invoice, so it is literally a continuous list.
Can this routine then be continued on all the other invoices in "RawData", copying them to new worksheets in the same workbook "sheet2","sheet3" etc until there is no data left in RawData, bearing in mind that there may be 10 invoices or 100 invoices in the "RawData" sheet.
View 9 Replies
View Related
May 31, 2009
I have a file with four worksheets. The first is the master sheet. The other three sheets we can call "SheetB" "SheetC" and "SheetD." The actual names are quite long. Column T of the master sheet (except for the header row) contains dates formatted as text in YYYYMM format. I need a macro that will copy the rows to the other three sheets based on these criteria:
SheetB - dates April 2010 or before
SheetC - dates May 2010 to April 2011
SheetD - dates May 2011 and beyond
View 9 Replies
View Related
Jun 4, 2009
I am trying to copy and paste between workbooks that are defined in an array. However, I get an out of range error when the code first reaches the line Workbooks(Wkbk(WkbkNum)).Activate.
Sub Gather_Risks()
Dim MasterRow As Integer ' Declares row number in Master Worksheet
Dim RowNum As Integer ' Declares row number in active array worksheet
Dim Wkbk(13) As String
MasterRow = 3
WkbkNum = 0
' Declare Wkbk array
Wkbk(0) = "G:Catering-RiskRegister-0409.xls"
Wkbk(1) = "G:CFO-RiskRegister-0409.xls"
Wkbk(2) = "G:Freight-RiskRegister-0409.xls"
Wkbk(3) = "G:GCA-RiskRegister-0409.xls"
Wkbk(4) = "G:IT-RiskRegister-0409.xls"
Wkbk(5) = "G:People-RiskRegister-0409.xls"
Wkbk(6) = "G:Regional-RiskRegister-0409.xls"
StartAgain:
Workbooks.Open (Wkbk(WkbkNum))
RowNum = 3
Do Until WorksheetFunction.CountIf(Rows(RowNum), "") = 0
View 9 Replies
View Related
May 4, 2014
I began to ponder a way to copy down cells so that the copying of the formulas results in references as shifting horizontally instead of vertically. One particular reason that this occurred to me had to do with my attempting to use Excel to make more orderly text copied from Adobe.
So, for example, if I copied text from Adobe, I would paste it in Excel. Thirty lines of text would past vertically into a column, from Row A1 to Row A30, with each line of text in its own row. I wanted to figure out a way so that in adjacent columns, I could put it so that I would have a set of formulas reading in =A1 in Column C cell/row 1, =A2 in Column D cell 1, =A3 in Column E cell/row 1, =A4 in Column F cell/row 1, =A5 in Column G cell/row 1, and so forth. I realized that if I copied this down, in the second row, the result would entail references to A2, A3, A4, A5, A6. I would prefer that the references update to A6, A7, A8, A9, and A10.
View 5 Replies
View Related
Apr 22, 2014
Why the following doesn't work?
Sheets("Sheet1").Range(Cells(1,1), Cells(20,1)).Copy Sheets("Sheet2").Range("A1:A20")
If I can get his to work, I will be able to use variables for the Cells arguments to give the functionality I want.
View 3 Replies
View Related
Jun 11, 2007
While copy/pasting large data ranges in Excel, I get the message "Not Enough Memory". I am clearing the clipboard using the command:
Application.CutCopyMode = False
View 4 Replies
View Related
Dec 1, 2011
I have two workbooks I am using. Essentially I am copying values out of one workbook, opening a second workbook, manipulating data and pasting it. Everything is working great but one issue! The first workbook has named ranges in it that I don't want in the second workbook (just values). I don't want them because when I try this operation the second time it asks if I want to use the same name or choose a different name. For some reason it is still copying over all the named ranges (all 343 of them!). Is there a way to not allow it to do that or simply just delete the names before I close the second workbook?
Win 7 64, Office 2010
Sub CopytoDB()
Application.ScreenUpdating = False
Worksheets("Setup").Select
Range("A2:A766").Select
Selection.Copy
Workbooks.Open Filename:="D:Server MirrorDatabaseSetup Database.xlsm"
Worksheets("Database").Select
Columns("E:E").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
[code].....
View 1 Replies
View Related
Nov 9, 2009
I have a workbook with multiple worksheets. Each worksheet corresponds to a certain store fixture estimate. Ont these sheets I have a specific cell where you can input how many fixtures of that type are to be used.
On that sheet also, is a range of cells (ex. Range("A65:F3340")) that needs to be copied to a new summations sheet of total hours to build the project.
If sheet 1 has 1 fixture - the macro should copy the range of cells only once.
Sheet 2 has 4 fixtures - tha macro should copy the same range four times appending each set of data tot eh end of the previous, And so on for each fixture sheet.
View 3 Replies
View Related
Jan 20, 2014
I am trying to do form consolidation. I have multiple forms to fill out for work so I have combined them into one work book and have all the cells of my paperwork linked back to a master page in the work book where i can fill out everything and it populates in rest of the workbook. From there, I export each page to its own workbook, save the file name and upload to server. But even after they are in their own workbook and uploaded viewers still get an error saying that it is linked to another sheet and asks if it wants to try to update. So far the only way I know how to fix this is after I export to its own workbook I have to copy everything, then Paste Special- Values to stop this. Is there any way I can have the sheets display only the values from those cells and not be linked in that manner?
View 1 Replies
View Related