Repeat Values Into A Column
Feb 3, 2007I am looking for a formula to repeat a given set of values, a certain number of times ...
See attached for visual explanation ...
ADVERTISEMENT
Repeat Values In Another Column After Every N Rows
Jan 30, 2014I have data in rows like this
A B C
1 x y z
2 x y z
3 x y z
4 x y z
5 x y z
6 x y z
7 x y z
8 x y z
9 x y z
10 x y z
11 x y z
12 x y z
What I am looking for is that I want to repeat the rows after every third row in another column. For eg
A B C D E F G H I
1 x y z x y z x y z
2 x y z x y z x y z
3 x y z x y z x y z
Prevent Repeat Values In Column Across Worksheets
Nov 23, 2013I know how to use data validation to prevent repeat values entered into a column on one worksheet using data validation. I don't understand how to do this across 12 worksheets (months of the year) in a file.
To be more clear: When I enter an ID in a column cell, I want that to be compared to all the other ID's in all the past worksheets and rejected if it has already been entered
All are column D The values entered are identification numbers and have both letters and numbers.
Transpose / Repeat Values In Column Based On Count?
Aug 27, 2010I was wondering if there was an array formula or some VBA code which can transpose/repeat values based on a count. Below is an example of what I mean:
Name Count Output Tod 4 Tod Bill 3 Tod Sue 5 Tod
Tod
Bill
Bill
Bill
Sue
Sue
Sue
Sue
Sue
Counting Repeat Values
Dec 10, 2013I'm putting a presentation together for work regarding false alarms and I'd like to count how many alarms have gone off at certain locations and I'm wondering if there is a formula that will accomplish this. I've attached a pic of a spreadsheet containing the data to be used. On the left side, there is a table labeled "Alarms" with columns displaying the dates, street numbers and street names. On the right side of the spreadsheet, there is a table labeled "Activations", which will be used to display the amount of single, double, triple, etc. activations.
For example, using the data, the alarm at "2 Red Oak Row" has gone off 3 times and since there are no other addresses where this has happened, a "1" would be displayed under the box labeled "3" in "Activations". Since the alarm at "4 Winding Way" and the one at "23 Blackberry Lane" have both gone off twice, a "2" would be displayed under the box labeled "2" in "Activations". The same would hold for addresses where the alarm has gone off 3 times, 4 times, 5 times, so on and so forth. In addition, if an alarm has gone off 10 or more times at any residence, the first 10 activations and any subsequent activations would be counted as a "1".
For example, if there is one case where an alarm at a certain residence has gone off 10 times (or more), a "1" would be displayed under box 10. If another residence's alarm also went off 10 times (or more), a "2" would be displayed under box "10".
Autofill Column To Repeat Set Of Data From Another Column
Aug 10, 2013I want to Autofill a Column C to repeat a set of data in Column A, if Column B contains an integer, as shown below. Being able to Autofill this data allows me to have a dynamic table for use on multiple projects that may have a different amount of rows in Column B.
Outflow % Table
25
50
[Code]......
Copy Cell Values While Id Value Is Same To New Location Then Repeat For New Id Value
Jul 14, 2006what I need to do is , while an id value is constant copy 2 adjacent cells to a new location on the same row as the first occourance of the id value, then if the id is the same on the next row repeat the copy and add these 2 values to the cells next to the ones previously copied.
Once the Id value changes then the copy restarts on a new row which is the same as the first occourance as the new id value and repeats the same sequence as described in the first statement.
I have attached a sample spreadsheet showing an example of the source and how I would like it to end up, the colour is only there to seperate the outcome from the source and is not required in the code.
Insert Rows & Repeat Values Based On Corresponding Cell Value
Jul 7, 2009I have a list of 130 names in column A. I have a number value between 0-10 in column B (next to the name). I need to insert the number of rows defined by the value in column B, below each row that I already have (if the value is 0, then the row needs to be deleted). The inserted rows have to be filled with the name value from the row above.
For example - before macro:
Joe Bloggs 2
Adam Wilson 10
Peter Andrews 0
Claire Burrows 6
After macro:
Joe Bloggs
Joe Bloggs
Adam Wilson
Adam Wilson
Adam Wilson
Adam Wilson....................................
Repeat Column Of Data Down A Row Using A Formula?
Jun 9, 2014I'm trying to create a formula (if possible) that will repeat column headers down a row and repeat every nth time. I have text values in cells E6:AL6 and would like to use a formula that will make it so that E6 will show up B2, F6 will show up in B3, G6 will show up in B4, etc. And then when it gets to B35 (AL6), B36 will then revert back to E6, and the loop will continue - B37 will be F6, B38 will be G6, etc.
My thought is to create an offset/address of some sort that will read as OFFSET(E6,0,x+1) and if x>35, start back at 0. However, I don't think you can create such a formula using an offset?
Repeat Column Value Five Times Of Each Cell
Mar 23, 2014I have values
2
8
9
As so on in my cells a1,a2,a3 as so on
And I want value of column a repeating five times of each cell value in column b
like result
2
2
2
2
2
8
8
8
8
8
9
9
9
9
9
and so on
Repeat Macro In Adjacent Column
Jan 15, 2010Sub For_Adam()
For x = 1 To Range("G7")
Calculate
Range("G11").Select
Selection.Copy
Range("B15").Select
ActiveCell.Offset(x, 0).Range("A1").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Next x
Application.CutCopyMode = False
End Sub
Now all I want is for this to be repeated in the next column, so everything is exactly the same but it doesn't start in B15, but starts in C15, then D15 etc.
Scroll Causes Column Headings To Repeat
Aug 23, 2007I have a rather large workbook with a lot of VBA behind it (about 1MB with no data, just formatting and VBA code). It all seems to work perfectly, except one sheet. It is a list of about 35 options with checkboxes beside each option. When the sheet is made visible through VBA code, the user has problems when scrolling the sheet.
It's hard to describe, but it all looks perfect until either the scroll-wheel or the scroll-bar is used to move around the sheet. The display then goes completely screwy. The heading row (which is actually a frozen pane anyway) ends up repeated all down the sheet, as do the column headers (A|B|C|D|E...). If i select another sheet and then back to this one, it's fine, it appears to be only when it is un-hidden through VBA.
I have attached two screenshots as an example... the only thing I have done between the un-scrolled one and the scrolled one is scroll the mouse wheel down and back up once.
Reformat Table Layout To Repeat Rows Based On Cell Values
Jun 11, 2008I can export inventory data from my Point of Sale system that looks like this:
I need to manipulate it to look like this:
To do so I think I need a macro(?) to:
Copy and insert as many rows as the quantity in Column C. In case of >1 the row is deleted.
This would allow me to print labels for every item in my inventory.
Column Copy From Another Column Without Repeat
Jan 5, 2014I have 2 column in Excel sheet A and B .
What i need that when i enter values in the first column A the column B copy this values , but when i repeat value in first column A .
The column B would not copy it that all I need .
Repeat Cells In Column Depending On Change In Another Columns
Jan 23, 2013Here is an example list:
Networks
Hardware
Networks
Software
Networks
Resources
Apps
Hardware
Apps
Software
Apps
Resources
Domain
Hardware
Domain
Software
Domain
Resources
Print
Hardware
Print
Print
All I'm trying to do in the second column is something that can say if there is a change in column A, then restart the order, or not..
Repeat The Following Rows And Formula With Column A Starting At 9150
Oct 28, 2008I need to repeat the following rows and formula with column a starting at 9150 and going through 15,000 in 50 point increments. Need formula I can copy and paste easly. see the attached example.
View 4 Replies View RelatedHighlight Repeat Cells In One Column If Cells In The Adjacent Column Contain Specific Text?
Apr 14, 2014I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies View RelatedFind Text In Column Then Select Non Blank Cells To Right And Repeat
Jul 13, 2012I would like to search Column C for an instance of the text "Std. Residual", then cycle through the non blank cells to the right and run some formatting code:
VB:
'this line will be modified so that i cycle through the non blank cells that i have found
For row_cycle = 1 To 7
'not signifcant
If Abs(ActiveCell) < 1.96 Then
Selection.Interior.Color = 255
[Code] .....
I then want to search for the next instance of "Std. Residual" in Column C, do the same again, and so on for the entire Worksheet.
Copy Column Data From Multiple Tabs Onto Specified Tab / Transpose / Repeat
Mar 25, 20141. The idea is that the macro will start on sheet1, look at column "Jon", copy the values down to the last active cell as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B8 and B9. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
2. The macro will then go to sheet2, look at column "Jon", copy the values to the last active as well as the dates and paste special values and transpose them onto the "Jon" tab starting in B18 and B19. Each day all of the dates and values on the "Jon" tab should be overwritten with the data on sheets1 and 2, instead of it being cumulative.
3. The macro would then save the "Jon" tab as a separate pdf in a specified location.
4. The process would then repeat for "Mike" and "Paul". Each day the number of columns can fluctuate, so it may be 3 one day (Jon, Mike, Paul) and 8 the next. The number of rows also may vary from day to day, and column to column.
I have attached a workbook that contains the data for the scenario above as well as the output (Jon, Mike, Paul tabs). Ideally there will not be new tabs that remain for Jon, Mike, Paul, just a default tab (e.g. "output" tab) that would receive the transposed data from the columns for Jon, Mike, Paul. I put all 3 in the workbook so you could see how each of them would output.
Copy A Column Cell If V Column Cell = YES Then Repeat
Jan 26, 2010Sub Printstuff()
Application.ScreenUpdating = False
For Each cell In Range("V168:V246")
If cell.Value = "YES" Then
'enter the name that is in The A (of the row with Yes) column in A2
'Run Sub Individual
'Print
'Run Sub View All
End If
'Next "Yes"
End Sub
Excel 2010 :: Repeat Cell Data Based On Another Cell Column Dragging Down
Apr 24, 2014Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
Find Last Cell In Column And Paste Formula In Next Blank Cell Then Repeat On Remaining Columns
Jan 14, 2013I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.
VBA - Generate Random Column Values From Existing Column Values?
Aug 22, 2013[URL]
I have Column C and D filled with numeric temperature and humidity data. I need next 16 rows (8 more set) to be filled with randomly generated dummy data by the values exist in C and D. Same numbers but randomly distributed.
Extract Largest Values From Column B And Corresponding Text Values In Column A?
Oct 1, 2013There should be a formula to extract the largest values and its corresponding values. For example, if column
Products Costs
A1 Pen 200
A2 Pencil 125
A3 Radio 670
A4 Apple 1500
A5 Xbox 222
A6 TV 100
The desired outcome
Products Cost
Apple 1500
Radio 670
Xbox 222
Pen 200
Pencil 125
TV 100
The second goal is extracting the top 3 largest values using a formula.
Sample file is attached for your convenience. Desired outcome is in GREEN.
Calculate Mean Of Column B Values Based On Date Values In Column A?
Dec 5, 2013Below the two columns represent Column A (date and time) and Column B is temperature.
How can I take the mean of all temperature values for May 1, then take the mean of all temperature values for May 2, etc.?
5/1/2013 0:0012.4
5/1/2013 1:0012.4
5/1/2013 2:0012.5
5/1/2013 3:0012.5
5/1/2013 4:0012.5
5/1/2013 5:0012.4
5/1/2013 6:0012.4
Summing Up Values In Column Corresponding To Unique Distinct Values In Another Column?
Dec 24, 2013I have two columns in excel, col A and col B.What I would want to achieve is following:
Col A Col B
A 2
A 2
A 2
B 3
B 3
B 3
B 3
C 3
C 3
C 3
Now I want a total of values in column B pertaining to unique (or say 1st occurences) of values in Col A. So in this case the output should be 8 ,Achieved as follows(2 +3+3).
[URL]
Counting Values Of One Column Based On The Uniqueness Of Values In Another Column
Jun 11, 2014Here is a table
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail
9266321m34:13.0E__uMail
92677165m23:43.0E__uMail
9309415m07:24.0E__uMail
[Code] .....
Here is some context
Each one of these rows represents an entry into a ticket in our incident management system. Col4 represents the method by which the incident was reported to us (Email, Voicemail, Walk In, Ask IT). A ticket can be open and closed with a single entry if the issue is easily solved or it can have many entries if the issue is complex and requires more troubleshooting or escalation to a higher tier of support. I need to determine the number of unique tickets submitted by each reporting avenue (Email, Voicemail, Walk In, Ask IT).
In this table the number of tickets that were:
submitted via Email is 14
submitted via Voicemail is 1
submitted via Walk In is 2
submitted via Ask IT is 1
Col1 Col2 Col3 Col4
8821015m14:44.0E__uMail = 1
9266321m34:13.0E__uMail = 2
92677165m23:43.0E__uMail = 3
9309415m07:24.0E__uMail = 4
[Code] ....
What I need is a formula that will produce this result.
Lookup/Match: Compare A1 For The Values In Column B, Then Return The Corresponding Cell (column C) In Column D
Jan 31, 2008I've been searching the forums for this problem but I can't seem to find any answers. Anyway, this is the problem. See screenshot.
I want to compare A1 for the values in column B, then return the corresponding cell (column C) in column D.
e.g. D1 = 2, D2 = 1, D3 = 4, D4 = 5 and D5 = 3.
Summing Values Of One Column Based On Values Of Another Column?
Feb 21, 2013I am trying to sum certain values in one column based on the values of another column. I made a few tables, generated some random numbers, and then I started writing up an if-then statement to see if I could get what I am trying to do to work. However, I was having difficulty getting the program to run, because I was declaring more than one variable (I think).
So for instance, I want cells in column G to sum forces in column C when a joint in column E matches a joint in column A. Similarly, I am trying to do the same thing for columns F and B.
I have attached a picture, which shows what I would like for the program to do automatically (rather than me doing it all manually)! I didn't include the code I wrote, because it was so minimal
Attachment 51660
Find High And Low Values Of Column According To Values Of Another Column?
Jul 23, 2014Ccheck the attached sheet for the explanation.
Book1.xlsx