below is my formula in one of my worksheets called "SS" which references several rows and columns in another worksheet called "CCA":
PHP
=OFFSET(CCA!$C$2,MATCH(SS!$A126,CCA!$C$3:$C$16,0),MATCH(SS!$A$4,CCA!$D$2:$AM$2,0)
I am trying to work out how to nest offset in a code using search replace. The goal is to find a value from cell A1 (example) and replace the values in the cells next to the cell containing samuel and the cell containing samuel.
A sort of search and remove data tool if you like So for example:
[QUOTE]A1: "samuel" (the search criteria)
Search range is: B1:D400
(for example)
Cell B40 = samuel
C40 = Driver
D40 = year
So, the macro is activated and finds "samuel" in B40 and I would like C40 & D40 replaced with "" The code I'm using is below: (this is just replacing the cell containing the search criteria with "test". I would like to nest offset(0,2) & offset(0,3).Value = ""
Sub Macro1()
Range("B1:D400").Select
Selection.Replace What:=Sheets("Sheet1").Range("A1").Value, Replacement:="test", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End Sub
I'm having trying to set up a new
workbook to pull selected results from an existing one. I am trying to figure
out the formula/function for cells B2:D3 on workbook2:
EXISTING WORKBOOK1:
(Col A is dynamic range 'name', Col B is dynamic range 'product', Col D is
dynamic range 'mtd')
A B C D
Joe P1 7
P2 1
P3 2
Total 10
Jill P1 3
P2 4
P3 1
Total 8
NEW WORKBOOK2
A B C D
P1 P2 P3
Joe 7 1 2
Jill 3 4 1
I entered the following as an array formula in cell B2 and it works fine to
return the proper result of 7:
=INDEX('workbook1.xls'!mtd,MATCH("Joe"&"P1",'workbook1.xls'!name&'workbook1.xls'!product,0))
This does not work to return the results for P2 or P3, I am assuming because
I need some sort of an offset for the different rows in workbook1.
I am hoping someone can point me in the right direction here. First I want
to locate the proper name in workbook 1 and then the proper product under
that name and finally pull the mtd col D result for that product and name.
I just want to replace the offset with find function. I have attached the sample file with the code. Just need a little change.
View 5 Replies View Related=INDEX('Data Dump'!$C:$C,MATCH('YTD Detailed'!B$2&A40,'Data Dump'!$G:$G&'Data Dump'!$D:$D,0))
I have to above array formula, i am looking to nest an offset within it. That looks up two columns to the right, but im having trouble.
Can an offset be added to an index?
I am having a heck of a time coming up with the proper combination of functions to return data to my worksheet.
Attached, you will find a screen shot of the pages I am dealing with.
Here is what I am trying to do:
On the page named Update Master, I am trying to put formulae into the highlighted cells C2:C11. Each cell will contain a formula to MATCH the team name in UpdateMaster!A:A with a team name in the chart found on worksheet WEEK ONE. Then, I want to return the value found 8 cells down, and 1 cell to the right of that MATCH. Here is a specific example:
In cell Update Master!C2, I need a formula that will MATCH the value in Update Master!A2, , with a value on the WEEK ONE! worksheet. (In this case, 2EZ. After locating the match, I want to return the value found in the bottom right of that players weekly score box. (WEEK ONE!C9...in this example).
I can't make a direct reference to the data...because the value in Update Master!A:A will change after each week. The team names will be sorted in alphabetical order after being sorted by the value found in Update Master!AE:AE...(each player's accumulated score).
I have tried so many combinations of MATCH, LOOKUP, OFFSET, INDEX, ROW...etc., and I keep getting VALUE# or NA# errors at some point in the computation. Maybe one of you can point me in the right direction.
I have attached an example s/sheet. Basically this is an excerpt of the data that sits in a pivot table. What I want to do is from another sheet query this data. I don't want to use another pivot table as they are quite hungry in terms of memory and the data source we have is quite large. In essence what I want to achieve is in cell G2 the user enters a code. A function (vlookup?) will then scan column A to find that code.
The function then needs to look across and sum the total of Requests and Responses for all the dates. Whilst the dates may change, the number of dates will remain the same. Once it has summed them it needs to return the totals to cells G4 and G5. Additionally it needs to fill in the relevant total (offset?) for the corresponding week as detailed in columns H-AH. It seems quite a simple lookup issue but I am not very versed in nested lookups. I have looked around and it seems INDEX woudl do the job but I am at a loss on how to construct this type of function.
I want to extend a formula like so- =Sheet2!M3
=Sheet2!M60
=Sheet2!M117
Basically I want it to go up in increments of 57 when I copy the formula down. Is there an easier way to do this rather than typing it over and over again? I looked on an older post and saw some information about OFFSET and INDEX but couldn't figure out exactly how that worked.
i'm running out an option, i must use offset or index function but there are problem found: 1.Offset function cannot use a dynamic height or number of columns and the result are #NAME?, here is the code
VB:
Private Sub CommandButton1_Click()Dim k As Variant
Dim b As Variant
Range(Me.RefEdit1).Name = "item"
[Code]......
I have the following formula in a cell:
=SUM(OFFSET(INDEX(J:J,MATCH(9.99999999999999E+307,J:J)),0,0,-M9))/M9
When the workbook with this formula is open it slows down other workbooks quite a bit.
If I run code in another workbook without the workbook with the formula open, calculation takes 0.099 seconds. If the workbook with the formula is open, the same code takes 2.24 seconds.
How could I change/replace above formula to average the last n (cell M9 value) cells in an ever changing column.
How can I modify the following formula to find the contents of reference cell, for example if the cell reference (G$3) is equal to 9 I want it to use 8 instead.
Code:
IF(ISERROR(INDEX(tra!$E$2:$E$1100,MATCH(G$3,tra!$C$2:$C$1100,0))),"",
INDEX(tra!$E$2:$E$1100,MATCH(G$3,tra!$C$2:$C$1100,0)))
I tried using G$3-1 but this doesn't appear to work.
I am working on a spreadsheet which contains a number of reference data sheets (named “Reference data 2009”, “Reference data 2010” etc). As their names suggest, these sheets contain reference data applicable to the particular year. This reference data is used to perform various calculations in a “Calculations” sheet.
On the “Calculations” sheet, the user specifies the year for which they wish to perform calculations. At present, I am using the volatile INDIRECT function to perform various HLOOKUP calculations along the following lines:
=IF(D15>=HLOOKUP('Detailed net pay calculations'!D16, INDIRECT("'Reference data" & 'Detailed method'!$C$2 & 'Detailed net pay calculations'!D1 & "'!$B$43:$Y$52"), 4, FALSE), “Do something”, “Do something else”)
The reason I'm using the INDIRECT function is to identify the sheet with the appropriate year (hence "Reference data"&'Detailed method'!$C$2&'Detailed net pay calculations'!D1 which could be interpreted by Excel as "'Reference data 2009NEW" or "'Reference data 2010", depending on whether there's text in cell D1).
My query
The function I'm using is working perfectly fine but I am wondering if it is possible to replace the INDIRECT function (in red) with INDEX or another non-volatile function in order to reduce the performance impact (I have a fairly large number of these types of functions).
Trying to grasp the concept of using these 3 functions to search for and return values from a data sheet.
The attached spread sheet has performance data for a group of employees.
What I need to do is find a particular employee then return a value for one of the category's.
For instance, I need to find "10TE03 ANGIE HOLLIS" Parts Usage on color or cell C10 in the attached sample.
Sometimes new category's are added to column A adding to the number of rows so a simple offset is not reliable.
Once I get that working, I then need to use a named range to total and average different data points for groups of employees by teams.
Maybe Offset-Index-Match is not even the way to go here?
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
- Find a value on a sheet “ORM” in Column G5:G33
-Get the corresponding value of B5:B33 of that cell
-Place that corresponding value in a canned remark: “You have the number 2 in Block, 12, 14, 25 22.
-Place this canned remark in TextBox31
This problem has come up fairly frequently lately, and I'm not sure how to fix it, or if this is by design...but in Excel 2003 I can't seem to do a "Find and Replace" based on the value of a cell. I can do a find, based on cell value, but the moment I change to the replace tab, the "values" and "comments" are missing from the "look in" dropdown.
I've only noticed this when I'm trying to replace on a filtered list, so I'm not sure if that is part of the issue.
Perhaps an alternative way of arriving at the same goal. Basically I have a worksheet with a number of filtered columns. They are filtered just right, using custom filtering, and so I do not want to undo the filters. In some columns I have formulas that are returning #VALUE! errors. I'd like to replace all of these cells with NA.
I recently became owner of a spreadsheet with some issues, and I am trying to make it useful. Each row has a URL of a blog post, and I want to extract the date from it (which is present in each URL) while getting rid of the rest of the URL. I was able to get rid of everything up to the year (which comes first), but then the URL continues, for example, 2013/05/16/the-rest-of-the-url/ and I would like to just have 2013/05/16 remain.
I am trying to use find and replace with the find box reading 2013/??/??/*/ and replacing it with 2013/??/?? which effectively erases everything else in the url, but leaves ?? instead of the numbers. Is there any way to have it so that it keeps whatever was in the original box?
[Code] .....
Trying to repeat a 550 or so character statement with a find/replace however I am getting type mismatch errors. When I use a smaller message in the "replace" it works.
I need it to post a message exactly as long as what I have in there. How do I get it to work?
Need assistance with the code for catching errors when using the find / replace function in excel? In particular, I am trying to write code to break to an error message when the value or string searched for isn't found in the find / replace. At the minute I have just copied the standard code using a macro and all this does is return a message box saying X entries replaced.
View 3 Replies View RelatedI have values in row A and I have values in row C. I want to create a loop to look up xxx and replace it with the values consecutively in row C. Look at example for a better Idea. I found a way to find and replace, but I not sure how to use it with qoutes. I was thinking maybe I dont even need row A and just supply a list and excel could have the chunk of data in the code itself.
View 2 Replies View RelatedI am trying to create a macro where it finds a a certain word in a column for example C. What i want it to do is find anything that says FWD_EUR and then replace that cell (e.g C2) with CASH_EUR_FWD and after it has done that it replaces the adjacent cell (e.g. D2) with EUR_FWD. I then want this to do the same with FWD_USD to CASH_USD_FWD and adjacent cell to USD_FWD.
View 2 Replies View RelatedI have attached the .xls file.
The basic setup is as follows:
(1) the user inputs a number into cells B2:B6 (arbitrarily shown as 3,4,3 and 2)
(2) the user then inputs a series of values into the respective columns E, G, I or K (corresponding to examples A-D, respectively) with SPACING between each value corresponding to the value entered in B2:B6.
For example, the value "4" is chosen in B3, so values are entered in column G at time = 0,4,8,12,16,20....etc
As another example, the value "3" is chosen in B4, so values are entered into column I at time = 8,11,14,17,20,23...etc, ie. the starting point is not necessarily t = 0.
(3) once the values have been entered as described in point (2) above, a series of results are automatically calculated in columns F,H,J and L.
NOTE: I have omitted the formulae for the calculation and have just entered arbitrary (color coded for clarity only-i don't need color coding!) numbers alongside each inputted value for the 4 examples A-D.
OK, so what I want to extract from the table for each example is the paired time AND result values, and then show them in a new table.
I have used an OFFSET formula (originally suggested by "daddylonglegs") to do this, and the results i GET are shown in columns O-V.
HOWEVER, what i WANT is the output as shown in columns Y-AF.
So as you will notice, there are 2 problems:
(1) Example C in columns S/T: value in cell B4 = 3, but the first value entered in column I does not start at a multiple of 3, so no values are returned in columns S/T because the offset function only uses row 6 as a reference point. What i want is the result shown in columns AC/AD.
How do i write a formula which says, "look down a column, find the first cell that has a value in it, and then offset from that cell/row" ?
(2) Example D in columns U/V: since the first input in column K starts a t = 12 (ie, cell K18), then i have 5 rows of empty space in columns U/V. What i want is the result shown in columns AE/AF.
Lastly, i should add that i am not necessarily stuck on using OFFSET function, since i keep reading that it is quite volatile.
I'm wanting to use Excel's built in replace function to replace ANY date with "Call:"
I'm not going to go into details about why, but I cannot use a code, as I only want to change them at specific times.
The dates are currently formatted as 12/09/2009. So I need to change the 12/09/2009 and any other date there may be to "call:" without having to go through every possible date.
I have over 16000 cells with different information in them, each cell is unique. There are parts of these cells that have similar information.
I am looking to search part of the cell, and replace the whole cell with my new description, so I can run pivot tables on it.
I have this table
.......A.....B.....C....D
1.....I......a.....d.....g
2.....II.....b.....e.....h
3.....III....c.....f......i
As you can see, the number I has a,d,and g, II has b,e,and h, and III has c, f, and i
I want to make formula that if I make the input g it would return I, f would return III, and c would return III, and so on
I want to make four formulas by using VLOOKUP, INDEX, MATCH, INDEX&MATCH separately.
I used the following code to replace " characters to !%. Then I copy the selected cells, and replace the !% back to "-es. The copied cells contain the "-es. When I comment the second replace, the function is working correctly, the copied cells contain the !%. What's the problem of my code?
Selection.Replace _
What:="""", Replacement:="!%"
Selection.Copy
'Selection.Replace _
' What:="!%", Replacement:=""""
Range B3:B1000 is text strings. Column C2:C50 is a list of words that I would like to "Find" in Column B and replace with it's lowercase values unless they start off the string.
Example
Find all occurences of And or AND and replace with and
Find all occurences of With or WITH and replace with with.
Find all occurences of Or or OR and replace with or
Using Offset
My
Private Sub OptionButton1_Click()
Set primary = Worksheets("Monitor Testing").Cells(20, 4)
For Counter = 1 To 3
If primary.Offset(0, 4)
Any way I could SUM a YTD using VLOOKUP and OFFSET? In another worksheet, I need to reference Account Income #, go to the worksheet shown below, find the Account Income number, Offset and sum of the columns in that row to the YTD figure.
Attached is a sample : EXAMPLE.xlsx
Account
Income
9/30/2012
8/31/2012
7/31/2012
6/30/2012
5/31/2012
[Code] ......
EXAMPLE.xlsx