I have succesfully created a userform to populate rows of data into a spreadsheet.
How would i go about re-inserting the data into the userform? I have a column A with a unique ref for each row. I intend to try and use it to edit a row.....
Any formula to repopulate the data back to userform for editing. I need the data to populate when a record is selected from a combo box [named URN for unique reference number]
View 5 Replies View RelatedI want to do is to use a listbox userform control to navigate between sheets. Each listbox item is the name of a location, which can be dynamically created/added (by other means). Clicking the listbox item activates the corresponding sheet.
however, depending on the user-mode of the application, if the user navigates to another location, then they must return to the location from which they navigated. here's an example to make it clearer
0) user form initializes, populates Listbox = ( Loc1, Loc2, **Loc3** ) {asterix means 'selected/highlighted'}
1) user clicks 'Loc1': sheet for loc1 is activated; repopulate Listbox= (Loc3) {as must go back to from where user came}
2) user clicks 'Loc3' to return to last location: sheet for loc3 is activated; repopulate Listbox = (Loc1, Loc2, **Loc3**)
i have gotten it all working fine, except that for some reason in Step #2 (the return to initial sheet & items) neither.......
I have a workbook that has 2 worksheets (Sheet1 and Sheet2). Each sheet has 2 checkboxes and a listbox that has 6 columns. Everything works great until I save and close the workbook. When I reopen, all the selections for the listboxes are gone, however the checkboxes are checked as expected. Why aren't the listbox selections being saved? How do I get them to save? I found something similar in a previous post but it referred to a userform which I am not using.
View 6 Replies View RelatedAs usual, I think this might be a really simple one but I can’t seem to find the answer. I want to create a userform that has text at the top (not the title bar) that looks at the value in the ActiveCell.
e.g. "Please enter information for " & ActiveCell
I have tried to place this in a text box and the code for the text box but nothing seems to work I am pretty new to userforms so could well be going about this completely the wrong way.
Depending on the result of a formula in R67, one of three things will occur. If the result is a 1, UserForm1 is displayed. If the result is a 2, UserForm2 is displayed. If it is nothing, nothing happens. Ok, I can do that.
However, with the code below, whenever I select any cell, and there is a 1 or a 2 in R67, the userform pops up. I only want it to pop up if I change a value in C6 which in turn changes the result of the formula in R67.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("R67").Value = 1 Then
Run "UserForm1"
End If
If Range("R67").Value = 2 Then
Run "Userform2"
[Code] .......
I've tried setting a monitored range. I've tried the code below in one form or another and it didn't work.
Code:
If Not Intersect(Target, Range("C6, R67")) Is Nothing Then Macro
I have a very vast code with several subroutines based on selections from a userform.
I believe I have identified a loop that might be slowing down the process in the below:
Code:
Dim n As LongFor n = 23 To 65
If ThisWorkbook.Worksheets("record").Cells(ComboBox2.ListIndex + 3, n).Value = "INT" Then
UserForm2.ListBox2.AddItem ThisWorkbook.Worksheets("record").Cells(2, n).Value
End If
If ThisWorkbook.Worksheets("record").Cells(ComboBox2.ListIndex + 3, n).Value = "EXT" Then
[Code] ......
Basically the code will go through each value (that can be only of those four instances) and put the title inside a different listbox.
This works, but it seems to be maybe too "step by step" and direct? Is there a way for it to skip after it found the corresponding value to the next N without checking for a match with the other items?
I have created a User Form that has been tested and is working properly. Now my last step is to do the following:
I would like to Display the User Form (coded as CommRM) if in Column C (can be any cell as it is a large worksheet) someone selects "Retail News" from the drop down option.
The code that I have been able to create so far is below. The problem is that when I select Retail News from a drop down in Column C the user form does not appear.
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range (C14, C3333).Text = "Retail News" Then Call UserForm_Initialize
End Sub
Private Sub UserForm_Initialize()
Load CommRM
CommRM.Show
End Sub
I'm working on an excel table in which I have the following information:
Product
Date
Defect
Defect Picture
N65-P0421
09/15/2013
Broken tab
D:folderpicture.jpg
N65-P0322
09/16/2013
scratches
D:folderpicture1.jpg
I need a userform in which I choose the field "product" and it loads the picture from the path at "Defect Picture". Is it possible?
how can I build a userform to display all values from a row? in order to select a row, i was thinking to use a combobox to display values from one column and based on that selection, display all values in that row? the reason i want to use a userform is because i would also like to be able to edit that data.
View 3 Replies View Related I have a userform I attached here with 3 combo boxes where a user can pick districts and schools, etc. When they click ok, the various tabs in this macro enabled workbook will "refresh" with the metrics for that entity)combination of picks from form) across the board. Each tab will have multiple pivot charts/tables so the filters will need to be addressed. I've been looking for code to kind of match this scenario. I've seen some that kind of in the ballpark, but due to the size and complexity, I suspect this will be extensive, right?
Parameter Selection.jpg
I am trying to put together a userform based time card calculator. User inputs the time in the time out and how long of a lunch. Then the program will display total hours worked for the day. Ive attached what I have so far. The only thing that is not very clear is that I have one hidden textbox for the lunch. It is there only for calculating and the visible one is going to inc by :15 min.
View 10 Replies View Relatedi am attach an sample excel file here.
1st sheet "sample",
first, the marco look for column c "F No."
if it search the content start with "F" and follow by 8 digit numberic,
2nd sheet "pop up",
then pop up userform to ask user to key in the textbox there. if it search for as many as "F" with 8 digit numberic, it will show at the userform and ask user to key in the data in the textbox there..
3rd sheet "key in",
user can key in any data they want
4th sheet "output",
after the user click the "OK" button
all the data put in the textbox there can automatic go to the column "a"
can refer by the sheet output..
Is there any way to change a label in a user form based on the value of a cell?
I'm trying to link a series of labels to a small range of cells that change based on a data-validation drop box.
I've tried finding info, but I can't seem to find the right place.
The code I've tried so far without result is:
Code:
Private Sub Label3_Click()
Me.Label13.Caption = ActiveSheet.Range("BQ15")
End Sub
Every thread I see on Google search for creating check boxes on a user form based on worksheet data says to use a list box, but I really want check boxes. Any code that will create, on initialize of the user form, a check box for each item in Import!B2:B (last row), regardless of the number of items? I am only worried about having about 20 max. Usually, it will only be 5 to 10.
I did try the list box, but it doesn't populate the list box.
Code:
Private Sub UserForm2_Initialize()
Dim lbtarget As MSForms.ListBox
Dim rngSource As Range
'Set reference to the range of data to be filled
[Code] ..........
I have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
View 4 Replies View RelatedI have a userform that I use to enter fault calls and it saves in to a spreadsheet.
I want to develop the capability to be able to have a form that Will search a pre-existing call and then when it finds it to bring up the main userform and populate it with existing details so that the user can amend them if reqd and save back to the database.
So what i want.
Userform - New Call
Userform - search existing call
I want to open 'search existing call' userform, be able to search based on one of the following: callrefnum, fault_type, Call_logged_by
Once the call is found - it should be displayed and then on double click it shd open up in the main userform 'New Call' with all existing details populated.
OK,I have a spreadsheet that prints receiving labels based on received purchase orders that pulls information from an SQL server. The problem is that it is pulling almost 40,000 lines of data to sort and pull at most 30 lines. One of steps is that the purchase order receipt register has a barcode that is scanned into a text box on a userform. Can I use this information to filter the SQL data pull to only grab that PO number? I'm at a loss on where to begin with this. Below is my SQL statement from the Query builder with an example of a PO number input(PO-rma100613).
[Code] ....
I have created a userform and it works fine.Following code is assigned to commandbutton to transfer data to sheet "FT".
[Code].....
I want to add that : If value in combobox2 is “ KT” then all entries are copied to sheet3
Otherwise copy everything in sheet”FT”
Other parameters remain same.
I have a userform that has a "payment type" combo box
This box consists of:
So I'm creating a UserForm that takes user input to create a worksheet based on the values input. My question is: How to select a range of cells based on a variable input value? For example, it asks how many competitors there are, and the user can input 5, 8, 10, etc. So I want that many cells in Row 1 selected, whatever the value input is.
View 9 Replies View RelatedI have a userform with 10 textboxes which will all contain a time in HH:MM format. Could I have the userform to fill the textboxes with a default value once a time has been entered into textbox1. I would like the default value to be the time from the previous textbox plus 30 mins.
eg. So if I enter 14:00 into textbox1 I would like textbox2 to display 14:30, textbox3 to display 15:00.
If this is possible, could I add a Listbox with the options 1 to 10. Then would I be able to only uses the textboxes based on the number selected in the listbox. So if I selected 2 then just Textbox1 and Textbox2 would have values in them. For 8 being selected then Textboxes 1 through to 8 would be filled.
I have created a spreadsheet that is a roster to track mutliple crews and shifts.
I have a userform which is used to select a person on shift and assign them as being on either, Annual Leave, Personal Leave, Training.... on particular days.
I would like to have the shift combobox auto populate what shift the person is on based on the person and dates entered. All the information is there I just can't get the code to do this.
I was also thinking about blocks where the shift goes from DS to NS and if people are on leave over this time. I would need the combobox to know this also.
I have attached my workbook : New Annual Leave Spreadsheet.xlsm
I am working with DatePicker calendar. I have two userform with date entries. In one userform I will have 2 textbox to enter dates. In the other one I will have 4 dates to enter. I used to have Excel 2007 with Calendar Control and used to work fine but had to make multiple calendar to control individual Textbox in multiple Userforms.
I am looking for a way to, If a userform is selected to trigger only the textbox name that is within that userform. If I add more entries the code adds automatically the date from the previous userform in the next one.
[Code].....
I was thinking that this would work but it still adds the date to my frmdashboard userform if I am in my frmdata userform.
Is there a way to trigger only the userform that I am currently in?
Using Excel 2013.
Note: I also have a "Clear All" VB Code that will delete every entry in my userform on Initiate but I am looking to not go this path.
I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.
Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long
[Code]....
Basically, I have a Userform and am trying to have a user enter 1 datapoint into a Textbox. Based upon that datapoint (it's 9 digits), I am trying to see if I can therefore reference a linked Access Table to fill in other textboxes with information tied to that record (so if they enter a unqiue ID, I want to automatically return Name of Person, Location, etc.) . I liken it to a vlookup in regular Excel but am just not sure how to go about it in VBA.
View 2 Replies View RelatedI am looking to modify my combobox from a userform to Filter the list based on the first entry on what the user will add.
I have a code that will search for all entries in my "Control" sheet and passed this on to my combobox:
[Code] ......
I have, within a module, the following function code that the user find the entry by adding the first 3 letters of the search they need:
[Code] .....
I would like to know what to change in the function to filter the list, once the user adds a first letter and then press the dropdown from the combobox, to filter the list based on all entries from the first letter to only show entries with that letter.
If A is entered, then, show only the entries strating with the starting letter A, but at the same time if the user adds more letter to filter to the first then second letter:
If AB is inserted, then, show entries with AB only.
Where do I add this code also, is this another function or this could be inserted within my function?
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc
Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example
John Red
Julie Red
Bob Blue
John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
I have a frame (Frame1) on a userform added using Microsoft Forms 2.0 Frame. I have added option buttons to the frame named OptionButton1 thru OptionButton4. I am trying to add code where certain cells are copied and pasted depending on which optbutton is selected. I tried the following code but because the option button is a frame object it doesn't seem to trigger the event.
Private Sub OptionButton1_Click()
'copy level 1
If Me.OptionButton1 = True Then
Worksheets("Sheet1").Range("G10:G32").Copy
Worksheets("Sheet1").Select
Worksheets("Sheet1").Range("C10:C32").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
End If
End Sub