Reporting Corresponding Cells In A Column?
Mar 4, 2013
I have a 2- column data as shown below
column A
Column B
aaaa
3
aaaa
8]
I have a data validation list in a different cell that reports the texts in Column A without repetition. The task for me is to write a formular in another column, which will report all the numbers that correponds to the text i select from my data validation list. For instance if i select bbbb i want the following numbers to appeear in a given column:
9
25
34
4
21
View 2 Replies
ADVERTISEMENT
Oct 1, 2005
I'm trying to figure out how to get Excel 2003 to report a value from a
separate column where the value reported by a MIN or MAX function
occurs. For example, say this is my setup:
Column A: time
Column B: value 1
Column C: value 2
I want to create a function using the MIN and MAX functions for cell
ranges in either column B or column C plus I want the value that
corresponds to the MIN or MAX value from column A. Basically, I have
data in columns B and C that occurs at times listed in column A. I not
only need to know the MIN and MAX values for certain ranges in columns B
and C but also the times at which these values occur (across hundreds
and hundreds of values with multiple MINs and MAXs, so this is not
something I want to do manually across multiple workbooks).......
View 11 Replies
View Related
Nov 17, 2009
I have a pretty big worksheet (230 columns x over a thousand rows). Any given column might have 3-4 nonblank cells; the rest are blank. What I want to do for each column is obtain the address of each nonblank cell, then grab the contents of the corresponding cell in the B column and concatenate the results. In the attached example, I want to put the function in d2, and the expected result would be ar 001, fc 001, hw 003.
View 4 Replies
View Related
Feb 2, 2009
I have been trying to create a report that involves three conditions, but so far I have had no luck using SUM and IF conditions to do this.
I have attached a file with an example of what I would need. Basically, I would need the "Resolved" and "In-Progress" quantities filled in below the "Country Report" for each respective country.
View 3 Replies
View Related
Jan 17, 2014
So I've got a workbook with three main sheets: Pipe, Fittings, Report. In the pipe sheet I've got 8 charts that are all the same but they're for pricing different types of pipe. I want to assign each line in all charts a category and then in the reports tab have a chart that will add all the prices from all charts in each category. I've tried using the VLOOKUP function but I can't seem to get it to work. I can attach the spreadsheet here if that would make things easier.
View 5 Replies
View Related
May 15, 2008
I have a 2-column employee file. Column A has the employee id and column B has the manager's employee ID. The reporting layers can get pretty deep. In this example, there are 6 layers of reporting. For example, Employee id 1200 (which is not in column A) has 2 employees. One of them (1712) has several employees, one of whom (1680) has employees reporting to them and so on for several levels.
Is there a way in Excel (2003 or 2007) to summarize the reporting structure? For instance, I need to know all of the employees that report up through emp id 1712 - not just that report directly to 1712, but all those under 1712's tree.
View 9 Replies
View Related
Aug 19, 2008
I run a store, and currently we handwrite all of our reciepts - and then implement them into a "Sales Sheet" on Microsoft Excel. From there we can monitor monthly sales and targets - coincide what we are selling, and figure sellthroughs etc etc.
To make life easier I am looking at typing out reciepts in Excel - within the same workbook as the "Sales Sheet". I would save each reciept as a separate sheet, and would like to know if it is possible to somehow copy data from the "Reciept" worksheet to the "Sales Sheet" worksheet??
View 2 Replies
View Related
Dec 31, 2009
I have a 2 page excel book, 2003, that runs a vlookup off a list from the 2nd page of the workbook. It is a long listing of information. It returns successful info in most of the cases, but in some instances it returns #n/a in one instance where it returned the correct info in others as in:
12345 = dog
12346 = cat
12345 = #n/a
Some instances don't report the corerct info at all while others only report the correct info some of the time like above where 12345 = dog and in some cases it doesn't turn out dog as the anser to the vlookup.
View 9 Replies
View Related
Feb 22, 2010
Assuming the below performance report:
Day 1
Actual 1
Target 1
Achieve 1/1 = 100%
Day 2
Actual 1
Target 1
Achieve 1/1 = 100%
Day 3
Actual 9
Target 10
Achieve 9/10 = 90%
Which method do you use to report the Achievement for the 3 days?
1. Do you take the average of 100%,100%,90% to give 97%
OR
2. Do you sum Actual (Day1+Day2+Day3 = 11) / Target (Day1+Day2+Day3 =12) to give 92%
View 4 Replies
View Related
Jun 19, 2007
I operate a small music management company and I run my accounts using relatively complex Excel Workbooks with different sheets for purchase and sales ledgers, cash in and cash out etc etc. Each financial year has its own workbook. My problem is creating financial reports. For example, if I need to create a report for outgoings and incomings relating to a particular project (a concert tour for example), and if that project was split over several financial years, I find myself spending hours creating pivot tables, and then pivot tables based on other pivot tables etc etc, to just get a clean report on that particular project. What I would love to have is a single report generating system, where I can just enter the name of the project, and get a financial report at the click of a button, based on all the raw data I have painstakingly entered in the individual workbooks and sheets. I reckon I'm too busy to sit down and tackle VBA programming myself, so I wondered if anyone knew of any third party software that might help me realise my dream simply and easily. Someone has already mentioned Crystal Reports, but I don't know whether this will be overkill.
View 3 Replies
View Related
Sep 11, 2007
I have a list of all my products in the "Price Listing" sheet organised by a 3 level tree structure (small range of products shown in excel file attached).
I am trying to create a way of getting this list into an organised way (via macro) so that I can print this off and give to my customers. Sheet 1 shows an example of how it might look after the macro is run using the tree structure. I have tried to use pivot tables with no success.I am currently creating this manually each month and updating all new products, then running the prices for each customer but it is taking far to lonng to create the master sheet.
Different customers have different prices and I want to create a price list so I can get someone in the office to output the file to excel, run this macro and create the file without me having to put alot of work into each one, or even be in the office while they are creating this.
Is it possible to create a table of contents for the completed result using either seperare sheets, text formatting
View 9 Replies
View Related
May 18, 2012
Users copy and paste source data from a report into worksheet 1 each month. Data from last month is deleted and data for the current month copied into worksheet 1.
I am trying to write a formula within worksheet 1 to check that data for the current reporting period only is in worksheet 1. For example all data from last month's reporting period has been removed and the only data in worksheet 1 is the current reporting period.
Reporting period is shown in two columns Year and Period number (1 to 12).
View 4 Replies
View Related
Oct 27, 2012
I have linked Combo Box to Pivot Reporting Filter through VBA. When I Select Combo Box Value, same will be filtered in Pivot table. Combo Box values are constant where as Pivot report filter may not contain all the values which are in Combo Box. If Combo Box value is not available in Reporting filter of Pivot it should throw up msgbox and should select first value of Combo box.
View 3 Replies
View Related
Apr 14, 2007
see attached image. Chart is recognizing the 20 dates but not using the real dates listed in the column. Changed settings multiple ways to try to get it to use the actuals - no luck. I realize 'month's is checked in the image - but I tried 'days' and still no luck. What needs to be changed to make it report actuals listed in the 2 columns?
View 3 Replies
View Related
May 17, 2013
I am looking for a formula or VBA code that will allow me to Select a Team leaders name and all the agents reporting to that team leaders would populate. I have the first part of that problem solved but its getting the agents names to generate uniquely that I find problematic.
Below is a step by step example of how i intend it to work
Step 1
I select the Teamleaders name
Shelaine
Once that has populated the Team Names automatically appear
Shelaine
Score
Andrew
20%
John
30%
Mark
40%
Sarah
50%
June
60%
The scores will populate on its own as I will include a Vlookup formula to generate the scores, Its just the Agents names. I am using Excel 2007
View 2 Replies
View Related
Feb 27, 2009
I need 2 different formulas to generate commission reporting information on the Summary tab of the attached sample Excel file. The first is highlighted in green. For these cells, I need a sum formula that reports the total commissions (column H of the "Data" worksheet) for items Ordered in the month listed in column B of the "Summary" worksheet, but not invoiced until the month listed in the column D, E & F headers of the same worksheet. Date of item order can be found in column A of the "Data" worksheet. Date of invoice can be found in column E of the "Data" worksheet.
Now, the problem that I think I am going into is the way Excel handles dates and times. All columns and data highlighted in orange on the data sheet need to be maintained without being changed, as eventually I am going to have a report setup by our operating program drop in there so that it automates the information without any additional labor by our employees who have varying levels of Excel proficiency. Unfortunately, the report from our operating program cannot simply list a date without a time. Feel free to create any column or field to the right of the orange columns in order to complete formulas based on those orange columns. I will just lock those cells when finished so that coworkers don't accidentally blow the shizel up.
The second sum formula that I need is highlighted in yellow on the "Summary" worksheet. Basically, I need a formula that sums all commissions in column H of the "Data" worksheet for those items that are cancelled AFTER invoicing. Column D of the "Data" worksheet lists the cancellation date. There are explanations for each of these on the worksheets for quick referral.
View 2 Replies
View Related
Nov 6, 2012
I am a Microsoft Excel 2010 user and am trying to create a usage report for a website that I work on. I have been compiling the usage reports into one spreadsheet. The columns I use are Month, Device, Language, Title 1, and Title 2. I can filter each of these rows and it shows me the number of records found. Each row on this spread sheet refers to a time that someone selected something on the site. For example the row may say;
Month (filtered)
Device (Filtered)
Lan (filtered)
[Code].....
How do I automatically populate a table on a separate sheet with the number of records found for a certain combination of filters applied. So if I'm looking at monthly trending I want to know how many times the stress test was started in May, June, or July, but automatically using info from the multiple filters.
What is a formula I can use to compile the filtered data from above.
Jan
Feb
Mar
Aprl
May
Start
=formula?
View 4 Replies
View Related
Apr 14, 2014
I am trying to find a solution for highlighting cells in a column that are repeats, ie. >3. I also need these cells to only be highlighted if the adjacent cell in the next column contains specific text. I have tried using conditional formatting with a countifs formula to no avail.
View 2 Replies
View Related
Jun 10, 2008
I would like to write a macro to add cells in columns C,D,E,F,G & H based on the text (employee) entered in column B. For example I need it to add all the cells for "John S" found within column "C" and then total it at the bottom with a code JSSS (John S straight shop time) or JSOS (John S overtime shop) as per my example. The attatchment is a spreadsheet I use to total billable hours for our employees.
View 3 Replies
View Related
Aug 6, 2009
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".
In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.
If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
View 8 Replies
View Related
Jul 25, 2014
I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
View 7 Replies
View Related
Oct 2, 2008
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
View 2 Replies
View Related
Mar 10, 2014
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies
View Related
Mar 31, 2014
Is there a way to filter column A but ensure it includes multiple lines of data in a different column.
I have attached an example of what I am looking for:
I need to filter by community but keep all the information listed in columns, B, C, & D.
So when I filter to Thunder Bay I would still see the 5 members listed in column D.
I realize the easy solution is to fill all the empty cells in column A to pick up the data in the other columns, but I do not want to Fill all the empty cells to include the name "Thunder Bay" (not the look I want for this spreadsheet).
View 2 Replies
View Related
Apr 24, 2009
I think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
AB
1-May
1-May777
1-May
1-May
1-May
2-May999
3-May
2-May
1-May
2-May111
1-May
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
View 2 Replies
View Related
Mar 18, 2009
I'd like a macro that does 3 things..
1. Find the last row (cell) of data in the "Customer Number" column. This search should be by the name "Customer Number" rather than by column letter because the column that "Customer Number" will be in can change.
2. Find the column named "Purple" (also by name for same reason)
3. If the "Purple" column has no blank cells in those same number of rows as the "Customer Number" column, delete the whole "Purple" column.
View 11 Replies
View Related
Jan 22, 2014
I am trying to Count (or counta?) cells in one column if they have data but only if within a date range in another column.
So, in the example below, I would want to count how many cells in column E have data in them, but only if the date in column A falls between Jan 1 2014 and Jan 5 2014. (In this case, result should be 4).
A
B
C
D
E
01/01/2014
[Code].....
View 4 Replies
View Related
May 22, 2008
I have been working with a few people on here to setup a macro to copy text from a column of cells to another column and then print this in to a text document but it seams to have got stuck in a loop ....
View 9 Replies
View Related
May 20, 2008
I have a worksheet on which the data is already grouped. At the top of each group is a row that contains only the group name. Since the rest of that row is blank, I want to use a blank cell on that row as a reference, then copy the group name to a newly created column, then fill that column down to the next group.
The goal is to create a column that contains the group name, rather than just having the group name as a " header" at the top of each group.
View 5 Replies
View Related
Apr 5, 2013
I have a problem which requires a vba routine that is currently outside of my level of expertise...
Here is an example of the data:
TESCO GARAGE 3729
59
REF 177 1092098207 BCC
59
CO-OP GROUP LTD
60
[Code]......
View 3 Replies
View Related