Assuming the below performance report:
Day 1
Actual 1
Target 1
Achieve 1/1 = 100%
Day 2
Actual 1
Target 1
Achieve 1/1 = 100%
Day 3
Actual 9
Target 10
Achieve 9/10 = 90%
Which method do you use to report the Achievement for the 3 days?
1. Do you take the average of 100%,100%,90% to give 97%
OR
2. Do you sum Actual (Day1+Day2+Day3 = 11) / Target (Day1+Day2+Day3 =12) to give 92%
First, ignore the colored portions. This is how I kept track of what I had completed in the form as I created it. Clients attend class once a week and pay once a week for their classes. I'm taking this one step at a time. At the initial interview of a particular client we will determine the payment per session due, and we will enter this amount in the column labeled "payment per session. We also need to keep track of how many sessions they have paid for. So in short, I'm looking for the following:
When "amount paid" equals "payment per session" set "minimum payment due" to $0 and increase "classes paid" by +1
I figured out how to enter the payment and return the minimum payment due to "0" but how can I make the "classes paid" increase by 1 every time the minimum payment equals "0"?
I have 143 macros, but I put 8 of them here b/c the post would not go through with all of them. I couldn't fit all of them on an attachment either b/c the file size was too big. However, I have this goal I have been working on for the last three months on the weekends and the last part.
I would like help with a macro that I can add onto the ones I have. I would like the macro to activate and cause a message box to appear when I open the excel doc. I would like also to be able to activate the message box and its associated macros after the document has been opened.
I would like the message box to have
- Message “The Current Time is (Macro puts current computer time here)”
- Question “How much time do you have?” then beneath this question
- Blank field labeled Hour to give answer
- Blank field labeled Minute to give answer
Depending on the current time on the computer as well as the hour and minute entered, a macro with a matching title from the list below will be selected that fits that criterion. For example, let’s say it is 5:30am and I entered 1 hr and 15 min in the empty fields of the message box. As a result the macro named “Sub Hour1Min15time530am” will be activated. Also due to the fact that the macros I have are in 15 min intervals the code would need to round to the nearest time, so if it was 5:33am when I ran the code the macro would default to 5:30am whereas if it was 5:39am when I ran the code the macro would default to 5:45am.
I am working on a Property Management spreadsheet to track the availability of vacant units (and upcoming vacant units). I'm trying to write a formula to count the number of current units that are listed as vacant, so that I can ultimately report on the overall unit availability as of any given period (today, 15, 30, 60, 90-days out). All of the data in this spreadsheet is dynamic and each field can change at any time. There are also a lot of blank fields as well. I am using Excel 2003.
Here are the fields/data that I am using for my analysis:
Column A - (Reporting Period Dates): A2 = 5/20/08, A3 = 6/5/08, A4 = 6/20/08, etc.
Column B - (Unit Status: V=Vacant, O=Occupied): B2 = V, B3 = V, B4 = V, B5 = V, B6 = V, B7 = V, B8 = O, B9 = O, B10 = O, B11 = O, B12 = O, B13 = O
Column C - (M/O Date. These dates represent when the current resident will move out) - Cells C2:C13 contain dates for when each tenant will move out
Column D - (M/I Date. These dates represent when the future resident will move in) - Cells D2:D13 contain dates when the future tenant will move in
If my reporting period is 5/20/08 (cell A2), then I need to calculate how many Vacant units (B2:B13) I will have as of 5/20. The formula will need to count all of the current Vacant units (B2:B13), plus it will also have to take into account any Move Outs (C2:C13) during the reporting period. For example, let's say we have an Occupied unit that is scheduled to move out on 5/15/08. The cell will show this as "O" but the formula will need to determine if the M/O date is <= the Reporting Date of 5/20/08 (A2). If so, then Excel would count this unit as a Vacant for the period.
In addition to this, I also need the formula to look at upcoming Move IN dates (D2:D13). The formula will also have to determine if the MI date is <= the Reporting date (A2). If the MI date falls prior to the Reporting Date, then this unit should be considered as Occupied and should NOT be added to the total available units. NOTE - there are quite a few cells in column D that are blank and don't have MI dates. If there isn't a MI date, then the formula should assume that those units are Vacant if it is past the prior tenants MO date.
I'm assuming that Excel can handle multiple conditions like this, however, I am not smart enough to figure it out.
My goal is to learn how to universally add specific codes to all clients in one shot.
Here's an example of the data I'm working with......
In column A - I currently have a list of 200 unique clients listed multiple times (1000 rows).
In column B - I have several different types of codes, but that are the same for each client.
Example:
A B
Client 1 Code A
Client 1 Code B
Client 1 Code C
Client 2 Code A
Client 2 Code B
Client 2 Code C
Etc. Etc. for 200 clients
So the question is: When adding a new code, How do I add a codes to all clients in one shot?
I'm using Excel to connect to an Oracle database using an HTTP connection.
I'm new to VBA and was wondering if it is possible to use cookies to keep the above sessions active?
I am required to fill up a sheet and provide to our Work force management team every week and it takes a lot of time from my day. I know this can be done easily with a code but I don't have enough experience with vb so can't write a good one myself
So here it goes -
I have a roster for my team (e.g. - sheet 2 "Roster") team members are required to work for 8 hours each day in their designated shift.
The codes in roster correspond to specific shift start time (e.g. - sheet 1 "codes")
Sheet - [URL]
I am required to fill up the sheet 3 "Staffing" each week for each half hour interval of a day that an advisor would be present for. So that means, I have to fill up 20 "P" for each member who is working on day from the time he would be starting his shift.
I have been trying to create a report that involves three conditions, but so far I have had no luck using SUM and IF conditions to do this.
I have attached a file with an example of what I would need. Basically, I would need the "Resolved" and "In-Progress" quantities filled in below the "Country Report" for each respective country.
On a daily basis we have to manually fill in a time sheet, and I was trying to think of a way where I could just copy and paste it into excel and it would show me on another sheet the total amount of hours I have worked over the month. This gets slightly more difficult, as different clients have different campaigns, and you can work on any variety during the day (however, not all of them do).
Typical raw data looks like this:
Client
Hours
Campaign
Rubber gloves
4.1
SEO
[Code] ....
Therefore I would like to combine the data and then send it off to another report that looks like this:
Rubber gloves - SEO
Rubber Gloves - PR
Bottled Water
1/12/12
4.1
2.3
2.8
[Code] .......
This would allow me to keep a check of how many hours I am working on each campaign over the month, and ensure that I don't run over on time. I have the boxes prepared for the 2/12/12, 3/12/12, etc. where I paste the raw data, and let excel break it down and put it in the report automatically.
I have been entering the data manually so far and I'd quite like to avoid a pivot table or chart (but i am open to it).
Is it possible to modify the windows power settings in excel vba. I have this example, but it doesn't do anything.
Sub testPOWERCFG()
CreateObject("WScript.Shell").Run "POWERCFG /CREATE Custom1", 0, False
CreateObject("WScript.Shell").Run "POWERCFG /CHANGE Custom1 /monitor-timeout-ac 15", 0, False
CreateObject("WScript.Shell").Run "POWERCFG /CHANGE Custom1 /monitor-timeout-dc 10", 0, False
CreateObject("WScript.Shell").Run "POWERCFG /SETACTIVE Custom1", 0, False
End Sub
I need some code to create and activate a scheme whereby everything is on and also some code to revert back to the default settings on the machine.
So I've got a workbook with three main sheets: Pipe, Fittings, Report. In the pipe sheet I've got 8 charts that are all the same but they're for pricing different types of pipe. I want to assign each line in all charts a category and then in the reports tab have a chart that will add all the prices from all charts in each category. I've tried using the VLOOKUP function but I can't seem to get it to work. I can attach the spreadsheet here if that would make things easier.
View 5 Replies View RelatedI have a 2-column employee file. Column A has the employee id and column B has the manager's employee ID. The reporting layers can get pretty deep. In this example, there are 6 layers of reporting. For example, Employee id 1200 (which is not in column A) has 2 employees. One of them (1712) has several employees, one of whom (1680) has employees reporting to them and so on for several levels.
Is there a way in Excel (2003 or 2007) to summarize the reporting structure? For instance, I need to know all of the employees that report up through emp id 1712 - not just that report directly to 1712, but all those under 1712's tree.
I'm trying to figure out how to get Excel 2003 to report a value from a
separate column where the value reported by a MIN or MAX function
occurs. For example, say this is my setup:
Column A: time
Column B: value 1
Column C: value 2
I want to create a function using the MIN and MAX functions for cell
ranges in either column B or column C plus I want the value that
corresponds to the MIN or MAX value from column A. Basically, I have
data in columns B and C that occurs at times listed in column A. I not
only need to know the MIN and MAX values for certain ranges in columns B
and C but also the times at which these values occur (across hundreds
and hundreds of values with multiple MINs and MAXs, so this is not
something I want to do manually across multiple workbooks).......
I have a 2- column data as shown below
column A
Column B
aaaa
3
aaaa
8]
I have a data validation list in a different cell that reports the texts in Column A without repetition. The task for me is to write a formular in another column, which will report all the numbers that correponds to the text i select from my data validation list. For instance if i select bbbb i want the following numbers to appeear in a given column:
9
25
34
4
21
I run a store, and currently we handwrite all of our reciepts - and then implement them into a "Sales Sheet" on Microsoft Excel. From there we can monitor monthly sales and targets - coincide what we are selling, and figure sellthroughs etc etc.
To make life easier I am looking at typing out reciepts in Excel - within the same workbook as the "Sales Sheet". I would save each reciept as a separate sheet, and would like to know if it is possible to somehow copy data from the "Reciept" worksheet to the "Sales Sheet" worksheet??
I am trying to create a life-cycle management sheet that is simple for the user but gives specific data.
The user would input "Date", "Machine type", "Component Set No.", and "Component". This would happen over a period of time and build up a picture of how often each component was lasting and it's average life in days.
I am fine from the user input side but am struggling to figure out how to extract ONLY the data I need to display in a graph.
For example: If I want to see the average no. of days "component X" is lasting before being replaced I've not been able to extract just that data. I have tried using a pivot chart but this won't do exactly what I'm after.
See the attached for a clear explanation : Component LifeCycle Example.xlsx
I really need a comprehensive excel file which can manage my bank account id, savings, transactions, withdrawals, transfers etc etc. could be better if it can show any graphical interface with charts as well. I am willing to have a file so that i can manage more than one bank accounts. ( Excel 2003 is my version)
View 3 Replies View RelatedI have a 2 page excel book, 2003, that runs a vlookup off a list from the 2nd page of the workbook. It is a long listing of information. It returns successful info in most of the cases, but in some instances it returns #n/a in one instance where it returned the correct info in others as in:
12345 = dog
12346 = cat
12345 = #n/a
Some instances don't report the corerct info at all while others only report the correct info some of the time like above where 12345 = dog and in some cases it doesn't turn out dog as the anser to the vlookup.
I operate a small music management company and I run my accounts using relatively complex Excel Workbooks with different sheets for purchase and sales ledgers, cash in and cash out etc etc. Each financial year has its own workbook. My problem is creating financial reports. For example, if I need to create a report for outgoings and incomings relating to a particular project (a concert tour for example), and if that project was split over several financial years, I find myself spending hours creating pivot tables, and then pivot tables based on other pivot tables etc etc, to just get a clean report on that particular project. What I would love to have is a single report generating system, where I can just enter the name of the project, and get a financial report at the click of a button, based on all the raw data I have painstakingly entered in the individual workbooks and sheets. I reckon I'm too busy to sit down and tackle VBA programming myself, so I wondered if anyone knew of any third party software that might help me realise my dream simply and easily. Someone has already mentioned Crystal Reports, but I don't know whether this will be overkill.
View 3 Replies View RelatedI have a list of all my products in the "Price Listing" sheet organised by a 3 level tree structure (small range of products shown in excel file attached).
I am trying to create a way of getting this list into an organised way (via macro) so that I can print this off and give to my customers. Sheet 1 shows an example of how it might look after the macro is run using the tree structure. I have tried to use pivot tables with no success.I am currently creating this manually each month and updating all new products, then running the prices for each customer but it is taking far to lonng to create the master sheet.
Different customers have different prices and I want to create a price list so I can get someone in the office to output the file to excel, run this macro and create the file without me having to put alot of work into each one, or even be in the office while they are creating this.
Is it possible to create a table of contents for the completed result using either seperare sheets, text formatting
I'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
I have a pretty big worksheet (230 columns x over a thousand rows). Any given column might have 3-4 nonblank cells; the rest are blank. What I want to do for each column is obtain the address of each nonblank cell, then grab the contents of the corresponding cell in the B column and concatenate the results. In the attached example, I want to put the function in d2, and the expected result would be ar 001, fc 001, hw 003.
View 4 Replies View RelatedUsers copy and paste source data from a report into worksheet 1 each month. Data from last month is deleted and data for the current month copied into worksheet 1.
I am trying to write a formula within worksheet 1 to check that data for the current reporting period only is in worksheet 1. For example all data from last month's reporting period has been removed and the only data in worksheet 1 is the current reporting period.
Reporting period is shown in two columns Year and Period number (1 to 12).
I have linked Combo Box to Pivot Reporting Filter through VBA. When I Select Combo Box Value, same will be filtered in Pivot table. Combo Box values are constant where as Pivot report filter may not contain all the values which are in Combo Box. If Combo Box value is not available in Reporting filter of Pivot it should throw up msgbox and should select first value of Combo box.
View 3 Replies View Relatedsee attached image. Chart is recognizing the 20 dates but not using the real dates listed in the column. Changed settings multiple ways to try to get it to use the actuals - no luck. I realize 'month's is checked in the image - but I tried 'days' and still no luck. What needs to be changed to make it report actuals listed in the 2 columns?
View 3 Replies View RelatedI'm having trouble to get VLOOKUP to work. Basically I need to look up Management Teir information from Sheet1 onto Main sheet as per the file attached. Both RecordID columns are Text so they should work right? But VLOOKUP returns #NA error.
View 4 Replies View RelatedI am looking for a formula or VBA code that will allow me to Select a Team leaders name and all the agents reporting to that team leaders would populate. I have the first part of that problem solved but its getting the agents names to generate uniquely that I find problematic.
Below is a step by step example of how i intend it to work
Step 1
I select the Teamleaders name
Shelaine
Once that has populated the Team Names automatically appear
Shelaine
Score
Andrew
20%
John
30%
Mark
40%
Sarah
50%
June
60%
The scores will populate on its own as I will include a Vlookup formula to generate the scores, Its just the Agents names. I am using Excel 2007
I need 2 different formulas to generate commission reporting information on the Summary tab of the attached sample Excel file. The first is highlighted in green. For these cells, I need a sum formula that reports the total commissions (column H of the "Data" worksheet) for items Ordered in the month listed in column B of the "Summary" worksheet, but not invoiced until the month listed in the column D, E & F headers of the same worksheet. Date of item order can be found in column A of the "Data" worksheet. Date of invoice can be found in column E of the "Data" worksheet.
Now, the problem that I think I am going into is the way Excel handles dates and times. All columns and data highlighted in orange on the data sheet need to be maintained without being changed, as eventually I am going to have a report setup by our operating program drop in there so that it automates the information without any additional labor by our employees who have varying levels of Excel proficiency. Unfortunately, the report from our operating program cannot simply list a date without a time. Feel free to create any column or field to the right of the orange columns in order to complete formulas based on those orange columns. I will just lock those cells when finished so that coworkers don't accidentally blow the shizel up.
The second sum formula that I need is highlighted in yellow on the "Summary" worksheet. Basically, I need a formula that sums all commissions in column H of the "Data" worksheet for those items that are cancelled AFTER invoicing. Column D of the "Data" worksheet lists the cancellation date. There are explanations for each of these on the worksheets for quick referral.
I am a Microsoft Excel 2010 user and am trying to create a usage report for a website that I work on. I have been compiling the usage reports into one spreadsheet. The columns I use are Month, Device, Language, Title 1, and Title 2. I can filter each of these rows and it shows me the number of records found. Each row on this spread sheet refers to a time that someone selected something on the site. For example the row may say;
Month (filtered)
Device (Filtered)
Lan (filtered)
[Code].....
How do I automatically populate a table on a separate sheet with the number of records found for a certain combination of filters applied. So if I'm looking at monthly trending I want to know how many times the stress test was started in May, June, or July, but automatically using info from the multiple filters.
What is a formula I can use to compile the filtered data from above.
Jan
Feb
Mar
Aprl
May
Start
=formula?
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View Related