I have the following workbook that has potential to display large amounts of text, particularly in the NOTIFICATIONS section. Despite the cells having Wrap Text selected, only a single line of the text is visible while the rest is only displayed when the cell is clicked.
View 7 RepliesI have to edit text cells (lots of them) containing approximatley 40 lines of text (screen width) - generally the edit will be done on lines 1-5
When I click on a cell, Excel is opening approximately half-way thru the text
I have to Ctrl Home to get to first line on each cell.
Is there a way I can set Excel 7 so that it opens the cell on the first line, first character of the text?
I have a database of address which have been inputted into text wrapped cells like this:
Line1
Line2
Line3
Line 4
Can I turn these lines into columns?
I have everything else like it is supposed to be, but in one cell a word is broken. I have tried everything and gone back through the tutorials. Excel 2007.
View 6 Replies View RelatedMy cells have wrap around text enables. However when I double-click the row, it does not automatically adjust the row height to accommodate all of the text. It shrinks to a small row height. How do I fix this?
View 1 Replies View RelatedNeed to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedI'm trying to use index match with IF statment. I understand how this works just not quite sure how to get a 'True' return based on 'logical_test' portion of the IF function. I want a TRUE return when column H starts with 'hbap.adroot.hsbc/gsc' or alternativly just contains the letters 'GSC'. If column H contain 'GSC' Column A will output 'GR' not HBAP'
View 2 Replies View RelatedI tried too much to split one cell Containing more than one lineI need to put every line in different cell.
My small example can describe better ..
Here's the details:
Same file shared by many users in the office. File is maybe 2200 rows long and 20 columns wide. Last column is a text field where users can explain variances. Cells in the last column are wrapped and the rows auto-fit on the height. Zoom is set at 100%.
One person opens the file and it looks fine on the screen. Print preview also looks fine. File prints out perfectly.
Another user opens the file and it looks fine on the screen. BUT, print preview shows that the bottom line or lines of text is cut off. File prints exactly like the preview showed with clipped text.
Both users can point the file to the same printer, but that doesn't seem to change anything. Still prints with text clipped for one person and perfectly for another...
I created a spreadsheet a while ago filled with data. It's password protected so nobody but me can edit it. But when I open it, I see only gridlines and no data. If I click on a cell I can see the contents up in the Formula Bar, but the sheet itself is blank. I've sent it via attachment to other people and they are able to view it, so it seems my Excel settings are doing something to me. I've tried so many things, but can't seem to work it out.
The text color is NOT white, the background is not the same color as text, etc. I dont know what else to try!!
I am trying to count all devices by model on sheet1 (FY13 4th QTR Meter Reads) into cell B524. The range is D2:D519.
Where I run into trouble is when I filter the data by Campus, I only want excel to count the number of devices for the model listed (A524) and place it into B524 for the visible rows.
The current formula I'm using is:
=SUMPRODUCT(SUBTOTAL(3,OFFSET(D2:D519,ROW(D2:D519)-MIN(ROW(D2:D519)),,1))*D2:D519=A524)
I have a column of cells (say N7:N149) for which I would like to count the number of times text is visible, as some are blank. Normally I would go =COUNTA(N7:N149), but in this instance the cells are only blank because I have related them to adjacent cells and nominated "" if those adjacent cells are blank, therefore when I use my =COUNTA(N7:N149) formula it gives me a total of 143 (149-7).
View 7 Replies View RelatedI have a text field at the bottom of a user form that remains hidden (i.e. visible = false) until the user clicks the "Ok" button. At that point, I want the text field to appear as the macro is running (it's a large macro, so the text field just says "processing, please wait...").
The first line of my macro is:
I currently have the formula =Countif(E5:E158,"YES"). This formula works great if when I dont filter, however, I need to filter through the data and I only want it to count the cells that have "Yes" when it is filtered, not just all the cells. I searched to forums and people keep referencing Subtotal() however that is counting all the cells and not pulling out the "Yes" inputs only.
View 2 Replies View RelatedI would like to count all of the cells in a filtered range which contain specific text. These cells will also contain numbers.
The cells either contain one of the following
EXA 130
130
EXB 130
The number could be any number (not just 130) the text will only be EXA or EXB
So I am looking for the number of cells in a filtered range (visible cells) which contain EXA (plus any number)
SUMPRODUCT(SUBTOTAL(102,OFFSET(X8:X3000,ROW(X8:X3000)-MIN(ROW(X8:X3000)),,1--(X8:X3000,"*EXA*")
The above doesn't work and I have attempted lots of variations of this with no luck.
I know you can select all cells with a formula.
I know you can select all cells with constants
What about selecting all visible text (and results of a formula) on a page?
I need a macro that can change the text in Field 46 from Criteria1 to something else, ie from "To be capped" to "Capitalised". This is my current
Selection. AutoFilter Field:=39, Criteria1:="OPEN" 'STATUS
Selection.AutoFilter Field:=46, Criteria1:="To be capped" 'TYPE
Range("AT1").Select
how to change the text only on the selection found by AutoFilter?
Need macro that changes the text in a particular field. Previously, the column to change was column 46 (AT), but now the column is column 1 (A). If I adjust the last line and run the macro, I get this error message: "Compile error: Invalid or unqualified reference".
. AutoFilter Field:=1, Criteria1:="To be capped" 'TYPE
. AutoFilter Field:=29, Criteria1:="OPEN" 'STATUS
.columns(1).Offset(1,0).Resize(rng.Rows.Count - 1,1).SpecialCells(xlCellTypeVisible).Value = "Capitalised"
I am trying to write the contents of a worksheet to a notepad file. Also, the worksheet has some hidden columns.
I have many checkboxes (1 to 26) that I want visible or not, based on whether the cell states "n/a" (are in a column in a different worksheet). Rather than writing this code multiple times, I'm looking to condense the code.
[Code] .....
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
Every time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.
I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.
Table below so i filter out the "a" so i just have numbers then want to past into vible cells.
CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44
I have a table of data with a filter on the top and a sum total at the bottom. Whenever i filter the list the total at the bottom doesnt change. how do i change it so the sum only calculates the visible cells?
View 3 Replies View RelatedI have a workbook that is set to show a form on startup and then the code tells excel to be visible = false. How ever i have disabled the close button on my form therefore i have stuffed my program up and cant edit it at all.
View 3 Replies View RelatedI have an autofiltered sheet, on which I need to find the last visible row (all columns have the same # of rows in use). I am trying to use:
View 4 Replies View RelatedI have a large spreadsheet that I am using multiple drop downs in to sort for
different scenarios. I do not want to use the general data subtotal command
but each time I sort I want to get a total for the visible cells -
I have finished a huge project. The final step is sending emails.
I have a filtered range. The email .HTMLBody is formed using the visiblecells, and forms an object called 'rng'
Only problem is - now I want to add my attachments. Within the visible range, the URL of the attachment is available (column 5).
So need a loop to do for each cel in rng.Column(5)
.Attachments.Add rng.Cells(cel.row?,5)
Can't get the row number of the visible cell to work. Once this is solved I can click the button and let the beast send out 1000+ emails. But at the moment cannot Was also thinking instead of For each cel, could use i = 1 to (last row in visible rng) ?
I have a table with autofilter enabled
I also have a cell that is supposed to show the sum of values in column C, cell C1
But the things is, the sum formula gets the sum of everything in column C.
I only want the formula to add items when it's visible in the table.
If I want to know the total expenses on bond paper, I select bond paper in column D's filter Then the expenses will show up with bond paper but I till get the sum of everything in Cell C1.
I have a need to sum only the visible cells in a row. Certain columns are collapsed depending on the month and there is a YTD colum that I only want to pick up the expanded or visible cells. I found a custom function listed below at Microsoft's website but it only allows for a single range to be entered and I need to pick 12 individual cells, for example A1, C1, E1, etc. There is other information in the cells between and that is why the range won't work. Is there a better way to do this or can this function be modified to allow me to do this?
Function Sum_Visible_Cells(Cells_To_Sum As Object)
Application.Volatile
For Each cell In Cells_To_Sum
If cell.Rows.Hidden = False Then
If cell.Columns.Hidden = False Then
total = total + cell.Value
End If
End If
Next
Sum_Visible_Cells = total
End Function
I'm looking for the row and column number, or number of rows and columns, that are visible in activewindow. Activewindow.visiblerange.row, .column (and .Scrollrow, .Scrollcolumn) are nice but
I prefer not to perform division on pixel height; I'm looking for some count or rowcount but I haven't been able to locate the object.