With Each New Entry In 2 Cells I Would Like A Running Balance In A Specific Cell
Jun 5, 2007
I have a cell B6 which I would like the amount to change with each entry I make. I have B4 which has constant amount, B8-B40 will have new entries and D8-D40 new entries. I had a function that had number 1 B8:B40 number 2 -D8:40 number 3 +B4. the function total in grey box is correct but when I press enter the cell in B6 says value and doesn't change to correct amount. Basically I have a balance in B6 that I want to change auomaticlly when I enter data in B8,D8 one day, then the next day, which B9, D9, etc..
View 5 Replies
ADVERTISEMENT
Oct 26, 2006
For the small database in my example workbook, I would like to apply credits earned at a later date to the oldest charges and create a "To Date" balance. After creating the "To Date" balance, I would like to select the smallest "To Date" balance as a way to identify the first charge that has no payment. Please see the attached for more clarity and additional information. The last column shows the desired results.
View 9 Replies
View Related
Jul 15, 2009
See attached workbook which is a stock order workbook with a summary re-order sheet -
The problem I have is that as the running balance effects the re-order column the summary re-order sheet will re-order from a the date that stock is needed onwards until someone types in stock recieved to get the balance right.
I need another condition within the summary sheet sumproduct formula so that the order will only go through once and not be repeated until a new figure is added into the number issued column on a future date.
View 10 Replies
View Related
Sep 4, 2006
Let's say I have the numbers 1-10 in A1 to A10.
I want to create a formula in A1 to automatically add each number (1+2+....)without creating a new formula every time. I want to start this operation in B1.
View 4 Replies
View Related
Aug 29, 2006
I want to zero out or blank out my running balance in the columns where I do not have an amount entered. So instead of having my running balance total run all the way down the spreadsheet, I want it to be blank at the first cell where I have not entered in a new bill. I have attached an example of what I am trying to do.
View 2 Replies
View Related
May 14, 2009
I'm creating a spreadsheet for work, which for security reasons requires certain information to be locked except to administrators. However the cells need to be open for inputing information for everyone until the administrator enters specific data.
Completed Date Time W/R No. Acc. No. Priority? Vunerable? Comments Closed Date/Time Yes 14/04/09 11:30:00 1234567890 8890976 Yes Yes N/A 14/04/2009 11:30
What I am looking to happen is once an adminstrator selects 'Yes' from the drop down menu on the Completed column, for that row of data to be locked for editing, unless unlocked later by an adminstrator.
View 9 Replies
View Related
Apr 25, 2007
I have a problem to solve
I have 2 worksheets named 'Products' and 'Order'
At the 'Order' i use 3 cells
Code
Pallets
Cases
When i entered a code to the cell 'code', it reads the code from the sheet 'Products' and then transfers to the active sheet 'Order' some items.
What i want is:
Because the user has to enter the quantity either to the cell 'Pallets' or
'Cases' i want to be locked the empty cell each time and to be used for calculations.
1st Eg.
The "45870"
Pallets to order : 50
because the user used the pallets the cell "Cases" must be locked and it must calculate the 50 pallets*100 so
Cases : 5000
2nd Eg.
The "45870"
Pallets to order : null
Cases : 5000
because the user didnt use any pallets the cell "Pallets" must be locked and it must calculate the 5000 cases/100 so
Pallets to order : 50
View 9 Replies
View Related
Apr 21, 2006
I am trying to run a macro once a particular word shows up in the combo box. now in my chase i could try to use VBA code to run the macros such that once the arrow is used in the combobox to select a certain word a particular macro labled the same name as the word chosen would run.
View 5 Replies
View Related
Jul 31, 2006
need a formula that will give me a balance at the end, needs 2 columns with charges and credits and it allways give correct balance total on last column. have not used Excel for long time and forgot.
View 5 Replies
View Related
Nov 7, 2008
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
View 9 Replies
View Related
Jan 7, 2009
I have a Sheet sheet1 and I want to run a macro when the cell D2 in Sheet1 is equal to 10,7,5,and 3. I only want this macro to run when those values are reached the macro then puts the data onto a sheet called wps. The macro is run as a module and is a sub macro.
View 9 Replies
View Related
Feb 20, 2014
I need a code to do the following:
1. Search in row 1 until it finds the header text "Balance"
2. Check every cell in that column until the last used row of the spreadsheet is reached.
For every cell.
View 3 Replies
View Related
Aug 15, 2007
I know that there is a lot on locking cells but it is confusing to me. I am able to lock a worksheet but that is not what I need. I have an Excel document that has thirty to thiry-six names on it. I do not want anyone able to edit the names. But I do want them to be able to add a name.
Example:
There are 30 students in the classroom. A new student comes in. I want the teacher to be able to add that student to the roster but not able to edit the names above. What do I need to do?
View 2 Replies
View Related
Mar 20, 2014
I have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
View 4 Replies
View Related
Feb 21, 2009
I want to be able to select a cell, for example A10, this would then run a macro that would copy and paste several cells of information along that row and paste it on another worksheet. However, if i then choose a15, a3, a79 in turn (using the control key), it would run the macro using those rows in turn.
i'm looking forward to hearing if and particuliar how this could be achieved.
View 13 Replies
View Related
May 26, 2009
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
View 6 Replies
View Related
Jun 5, 2009
I want to know if I can schedule a macro to run at specific times?
If so would 6 requests at the same time slow excel down?
View 6 Replies
View Related
Dec 4, 2009
Let's say I have 6 Worksheets in my Workbook with the following names:
Sheeta1
Sheeta2
Sheeta3
Sheetb1
Sheetb2
Sheetb3
And I have three Subs that I want to run, one Sub for two specific Worksheets.
How could I code my Subs so that the first Sub runs on Sheeta1 and Sheetb1, the second Sub runs on Sheeta2 and Sheetb2, and the last Sub runs on Sheeta3 and Sheetb3?
As you can see, the 1, 2 and 3 in the Worksheet names are what links the Subs to the Worksheet.
View 9 Replies
View Related
Jun 24, 2006
I have a module which runs behind a command button which creates a table and outputs it to an excel workbook. Is it possible to cause this module to execute at a specified time, say 9.00 pm or when the database is closed. It is not necessarily the case that the database is closed every day.
View 9 Replies
View Related
Jul 22, 2008
I have a spreadsheet with 'due date' for returns in column L and 'received date' for returns, in the adjacent column M.
I would like to get the due date to turn red when it is overdue, ie. the date in the cell has arrived and no return was submitted. By trawlling the forum, I managed to accomplish this with the following in conditional formatting:
Cell value is less than or equal to =TODAY()
All's great.....but - I would like the date to turn back to black if I enter a date in the adjacent received column, column M.
In other words, I want to flag a problem if the due date has passed, but once I receive the return and enter the date I receive it, i would like the due date entry to revert back to the original formatting ie. black. So only the outstanding returns are highlighted.
View 14 Replies
View Related
Jul 13, 2009
I have is a cell with a begining balance and a cell witha current balance.
I also have a column in which each expenditure will be placed ina cell in that column in sequential order.
What i want to do is take the value in the first cell of the expenditure column and subtract it from the begining balance and the place the result in the current balance.
But after the first cell i will need to subtract each value from its previous value to continue counting down so to speak.
I am at a loss on how to move the last value which will also be the lowest value in the column to the cueent balance cell.
View 13 Replies
View Related
Jun 1, 2006
I am trying to create a chart that will Add or Remove data entries as toggle buttons are clicked. I've fallen at the first hurdle. When I remove one series from the source data, all the SeriesCollection numbers will change down. e.g. ->
ActiveChart.SeriesCollection(2).Delete
where (2) will change to (1) when I delete a series. This then screws up subsequent Removal macros. Is there any way I can either lock the SeriesCollection number?
View 2 Replies
View Related
Apr 28, 2009
I have made a spreadhseet that track what games an official referees (sheet 1), what games they are touch judge 1 for (Sheet 2) and what games they are touch judge 2 for (sheet 3).
Sheet 4 then adds all these up for me and tells me as an good approximate estimate how much each official should get paid in way of expenses.
Simple enough so far.
I have a list of 3 letter codes on sheet 4 for each official that I put in the matrix of games. It's using these 3 letter codes that it adds it all up. This works fine
How can I get it to tell me if any 3 letter codes entered into the matrix (Sheet 1!D4:CD82) Do not match my list (Sheet 4!A5:A71). (an error detection system if you like).
To make it more interesting I would like it to ignore blank cells (games not played yet).
I'm not bad on excel formulas, but I can't get my head around how to do this.
View 6 Replies
View Related
Jul 7, 2009
i have an address that is all in one cell displayed like
101 hampton Court, Hampton heath, Hampton Town, Hamptonshire, HA01 1AS
but i need to have it split in to individual cells so
Cell A1 would be 101 hampton court
B2 Hampton Heath
C2 Hampton Town
D3 Hamptonshire
E5 HA01 1AS
each part of the address is split by a comma, so i have tried to use that as a identifier as to where that part of the address is, but failed on that, i can separate out the first part and the post code with a find and replace but not the middle.
also i need it to work backwards ie
it finds the post code first,
then the county
then the town
as those 3 are always the last 3 parts, but the address could only have 1 line of addres beofre the town or 3, and it would get messed up as all the post codes, county ans town needs to be in their respective columns
View 9 Replies
View Related
Oct 29, 2008
My workbook contains several worksheets each recording the results of equipment tests - one sheet for each piece of equipment. Rather than open each worksheet to check the date of the last test, other 'overview' worksheets pick up and display the last test date from each equipment record using the formula =MAX('sheetref'!A15:A500). Is there a better formula to do this?
Some items of equipment are tested at more than one frequency, ie Monthly, Yearly, etc. Therefore, the entry on row 15 of an equipment record may be column A 28/10/08 column D 'M' and row 16 column A 29/10/08 column D 'Y'. The above formula will only display the last test date, irrespective of frequency. There is a seperate overview sheet for each test frequency therefore, I need to modify the formula so that the date it copies from the equipment record worksheet to the overview worksheet is the date of the last test for the specified frequency.
View 9 Replies
View Related
Feb 11, 2014
In my workbook almost all of the column include a RED cell.I want to delete the cells BELOW the RED cell in a column.;And also want to migrate the whole column which has not RED cell in a to new sheet.Here is what I need:
delete-the rows below red.xlsx
View 2 Replies
View Related
Jul 18, 2013
i am trying to Put a specific value i,e "NO Deliveries" in blank Cells in the same row based on value in 1st cell of the Row which has a fixed value . note:the columns and rows are dynamic for example: I want to put the value "no Deliveries" in cell C because its blank.
A B C D
% of Availability
0.00%
80.00%
View 9 Replies
View Related
Jul 3, 2014
I am currently using this Code to search column1 for a Key Word that is entered into textbox "Kunde" on my userform.
[Code] .....
What i would really like to be Abel to do is :
Search for the cell in column1 with =Kunde.Value
Clearcontents of this cell and the 2 adjacent to the right.
i.e. Word is found in A7
Cells A7:C7 contents are cleared and fill Color returned to default colorindex 0
View 3 Replies
View Related
Apr 4, 2013
I have a list of data:
2
140
1
660
10
140
0.92
660
2
130
0.18
660
4
510
0.44
820
4
510
I want to have a formula that finds the sum of the values in Col 1 (Qty) for the rows that equal, eg: 140, in Col 2 (Product) So that I can have a list of Products of the Qty that relates to each product. (there are products in increments of 10 from 10 to 920, that is, 92 products)
View 2 Replies
View Related
Feb 3, 2014
I need to add something to the code below to have my first row of data entered into cell "Q8". As it is now the data is starting on row Q9 instead of Q8, but the rest of it is filling in correctly.
[Code] .....
View 1 Replies
View Related
