I have a sheet open that I would like to have a chart like...umm...floating in front of?
First off I want the same "chart" (or block of cells) to be on all sheets of my file so if I enter information into it on one of the sheets it'll be the same on all of them. That's the most important part.
The other thing I'm looking to do with it is I would love for it to remain stationary when I scroll up and down on the sheets. So basically the left half of my screen would scroll up and down but the chart on the right would stay put in my line of vision no matter how far down I scroll.
I have received following macro from someone to delete series but the problem is that it gives error when some sheets are protected, and I want those sheets to protected. When run it will ignore/leave protected sheets but delete series only from unprotected sheets
Private Sub CommandButton1_Click() Dim Rng As Range, i As Long, r As Range, lVal, uVal Dim DeleteCount As Double Dim lRow As Long Dim dr As Long Dim dc As Long dc = Sheets("Deleted Numbers").UsedRange.Columns.Count - 1 dr = Cells(Rows.Count, Sheets("Deleted Numbers").UsedRange.Columns.Count - 1).End(xlUp).Row + 1 If dr = 60001 Then ................
I am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode() ' 'Sheets("Summary"). Select If Range("a7") = "complete" Then ' Sheets(Array("1", "0")).Select Sheets(ArrSh(1)).Activate
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
I'm currently working on a workbook that has over 50 different sheets. On each sheet there is a column K that I want to graph if desired. From the Main sheet I would like to have checkboxes or something, so that when I press on it, the data from sheet x is added in the graph. Can this be easily done? It's not a problem to hardcode the which-button-calls to-which-sheet (just takes some time), the main thing I cant work out, is how to add a series to a chart, how do delete a series from a chart and so on..
I’m would like to delete some sheets in my workbook using a macro. The problem is that I won’t know in advance the name of these sheets.
I was thinking using a code like the following one to delete the sheets but the problem is that Excel expect a sheet name at this part of the code since it is expecting the sheet name.
Sub Delete_Active_Diagram() Application.DisplayAlerts = False Dim i As Integer Dim strSheetName As String Dim blnFound As Boolean
strSheetName = "Average Sales Per Week" & "" & Sheets(i + 1).Range("C3") i = Sheets.Count
For j = 1 To i If Sheets(j).Name = strSheetName Then
blnFound = True Exit For End If Next If blnFound = False Then Exit Sub If blnFound = True Then strSheetName.Delete End Sub
Is there a way to cope this problem, or should i think about another way to do it. Like selecting each sheet I would like to delete and then delete the selected sheets.
By the way. All the sheets I try to delete a Charts Sheets. Maybe there is a way to delete all the charts in my workbook.
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I want to do is be able to take The data from one week for every store and compile it into a chart to show a summary of the company as a whole. I know that I can reference from that chart to each worksheet the values I want, but how would I give that chart the ability to update each time I add a weeks worth of data.
I have attached a file that shows what I am talking about. The sheets labeled Waterloo, Mogadore, through Green are the sheets for each store.
I want to take the last weeks data and put it into a chart as seen on Sheet1. Then when I add data for 3/21/09 I want to make a new chart without retyping the data into the chart.
1) Is it possible to write a macro that will resize fonts in a chart (axes, text boxes) to specific sizes?
2) I usually copy chart sheets and paste them into Publisher but I have to resize them because they are huge when pasted. I would like to create a toolbar command that will take the selected chart sheet (not just a chart in a worksheet) and resize it and its components (part 1) to specific dimensions, then copy it as a picture so that I can simply go to Publisher and paste the chart after pressing said button in Excel.
I want my charts to be located in a new sheet each. I also need their names to start with "GR-Chart[number here]". So they should be GR-Chart1, GR-Chart2, GR-Chart3,......
ActiveChart.Location Where:=xlLocationAsNewSheet, Name:= "GR-Chart" & [this part I got wrong]
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
I am using Reafidy nice bit of code to hide worksheets if the user disables macros. The problem, though, is that it doesn't work for Chart Worksheets. How should I adjust this to accommodate charts?
Private Sub Workbook_BeforeClose(Cancel As Boolean) bIsClosing = True End Sub Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean) Dim wsArray() As Variant Dim iCnt As Integer Application. ScreenUpdating = 0
I need drop-down combo box to change a graph based on the option selected in the drop-down
Challenge: my Combo box resides on the First sheet only, but the items that populate in the drop-down list are dynamic and change depending on how many sheets exist for this document. The options in the list are Overall, Week 1, Week 2, ... Week N. Overall needs to sum up the data (or I can pull just from the summary page if I am lazy) and the Week N corresponds to a specific sheet added.
I currently am able to get my drop down to populate items correctly, and my macros to create the sheets dynamically with templates just fine (not bad for newbie).
So what I need to figure out is how to tie my drop down to make a scatter plot/bar graph based on the selected option and action. I can't find an attachment option here but here is some code:
Sheet 1 Code:
Code: Private Sub Worksheet_Activate() Me.ComboBox1.Clear Me.ComboBox1.AddItem "Overall"
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background: -- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook -- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing. In the entire workbook, I want to add 1 (counting function) only when: R1=2 AND E1>F1 or S1=2 AND G1>H1 or T1=2 AND I1>J1 U1=2 and K1>L1 on each appropriate sheet in the workbook.
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.
This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.
The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.
Here is a working formula for only one page. =COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))
Here's 2 problems with this formula: 1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.
2. I don't know how to make it work across several sheets.
This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"), Sheets("Sheet1").Range("C7").End(xlDown)).Copy Sheets("Sheet8").Range("A5").End(xlDown) End If
I am working with a nonprofit to set up their financial ledgers. There is one workbook with 12 sheets, one for each month. The goal is to be able to set up a formula that searches through all 12 sheets for every donation that a specific individual has made. For instance, let's say that John Smith gave x amount of money on 1/1/2000, y amount of money on 1/10/2000, and z amount of money on 2/2/2000. This data will appear on 2 different worksheets. I have the following formula, which allows me to look through one sheet at a time:
Where Column A in each sheet is individual name, and column B is amount donated. Sheet "Jan" is the data for the month of January, and sheet "Smith" is the culmination of John Smith's donations for the full year. Using this array function, I am able to retrieve all data for John Smith in the month of January, but I can't find a way to make one function that searches for all of John Smith's donations in each month. Is there a way to build an array function in VBA that would accomplish this?
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
What I'm trying to do is grab data from the raw data sheet and paste it into the master sheet based off of certain criteria. I want to list any accounts that are not correct.
For example, I want to look through the Raw Data sheet, find the account that contains campaigns which are not correct, and then list the name of the account on the Master sheet. I only need the account name listed once on the Master sheet.
Index across multiple sheets returning multiple values
I am building a payroll workbook and I need to build a sheet that will allow me to choose an employee name and the formula will return all the data related to this employee. I found this forumla to do this: =IF(ROWS(...)<=...;INDEX(INDIRECT(...);SMALL(IF(...=...;ROW(...)-ROW(...)+1);ROWS(...)));"")
But in my workbook, the data is on multiple sheets . How do I adapt this formula to look into 12 sheets?
that data would be returned in order of the date of the pay.
