I wanted to make a macro that saved my worksheet, then printed all the different tabs. The save is, of course, easy. Printing all tabs is being more difficult.
I tried to use the macro recorder, but all it did was select range, and then name each tab.
My tab names change though, so I need something that will just select all tabs.
Sheets.PrintOut. I have a button which uses:
View 4 Replies View RelatedI have 120 sheets in my workbook and I only need 5 of them to save when there are changes, the other 115 are were data is pulled from. Is it possible to tell excel not to look at a sheet when it saves? I'm just after making it save faster.
This is going to be a workbook that " moves" a round a lot, so I want to the 115 sheets in the same workbook.
I have a workbook on a web site. That workbook has the following
sFileName = sPath & ThisWorkbook.Worksheets("Retailer Lists"). Range("A" & c).Value & "/Fact+ Sheet.xls"
Workbooks.Open Filename:=sFileName
ActiveWorkbook.PrintOut
ActiveWorkbook.Close
When I run the code, the active workbook is the "sFileName" file. There are a couple of problems that I can't seem to get around. First of all, when I run the code, I get a Method 'Open' of object 'Workbooks' failed error. If I debug, it is on the Workbooks.Open statement shown above. If I do nothing but hit F8, the file opens. The second issue is nothing prints. The file is available to me and I can access things on the sheet, but it will not print. By the way, the CLOSE command works perfectly. Is there a different way that I should be accomplishing the printing?
I have a letter and numbers in the A column. example: (A001_C108_1231Xb)
This kind of numbers go from Column A1 : A1800.
I need to print them out, therefore I would like to fill every page which has 50 rows and 3 columns : A, D and G to write in the data.
I tried to do it manually, which is quite some work.
Sub print_recap()
PrintOut Copies:=1
End Sub
this returns a "sub or function not defined" on the printout line
Sub print_All_recaps()
Set ws = Worksheets("Employees")
If UCase(InputBox("Enter y to print ALL the records")) <> "Y" Then Exit Sub
For n = 2 To ws. Range("A65536").End(xlUp).Row
Cells(2, 2) = ws.Cells(n, 1)
PrintOut Copies:=1
Next
End Sub
If I remove the PrintOut line I do not get an error.
I suffered a very annoying HDD failure and lost loads of music. The only record I have is the winamp media library which I could only export to .xml. From there, I've been unable to do anything remotely useful with it (access would have been best, I suppose) so have resorted to trusty Excel. Even then I've underestimated the task at hand: I've now got 9 excel files, each 65536 rows long, with the xml data streaming down them. Can anyone think how I could get a macro to
1. run through the list(s), line by line, deleting any line that had (e.g.)
Track ID OR Genre OR etc...
In order to remove all but the 5 categories I have in bold below, i.e. name, artist, album, date, folder....
I have a vba to do page set-up:
*Left, Top, Right, Bootom as 0.5
*Header and Footer as 0.2
Once vba is run page set-up is ok ie margins but when printed Left and right margins are not 0.5cm.
solve this mystery?
Code:
Sub Print_Format()
Dim myRange As String
myRange = Selection.Address
ActiveSheet.PageSetup.PrintArea = myRange
With ActiveSheet.PageSetup
[Code]...
Need Macro to automatically printout my worksheets daily at a specifi time?
View 9 Replies View RelatedI have two sheets,one called pattern of about 25000 rows and one called rp1,
which is a fresh sheet downloaded each night from the web. What I want to do is select the names in column 3 of rp1 and printout in the same or a new sheet every row containing this name from the pattern spreadsheet.So for every horse named in col c,I want its complete record,could be 1 row or maybe up to 20 rows output,from the pattern worksheet(for each). They will all be underneath each other. I simply want excel to extract all the data belong to these names in rp 1 from the pattern large sheet. The names are in col r of the pattern sheet.
I have plenty of sheets in my spreadsheet but I need some of the sheets to be deleted before it can be sent to client due to sensitive data. Just to be proactive, some time I may not delete the sheet/s before I send it to client...and that means I am fired from my job.
How is it possible that before I save as my master spreadsheet, excel deletes some of the sheets (Names: "Cost", "Contacts","Vendor"), etc.
I have a workbook with several Sheets. I wish to automatically protect all sheets with specific user permissions, i.e. Select Unlocked Cells, Insert Rows, Use Auto Filter and Edit Objects, as I would have available when using the manual approach. Also, I wish to invoke a Password in the process.
Additionally, I need this code to operate when the file is Saved or Closed... transparent to the user.
I have a script that opens the workbook Excel, and save him as PDF format. But my script saves all sheets in a book. I need to save only sheets with name "Cnt1", "Cnt2" .... "CntX".
Code:
Dim xlObj, objArgs, xlWB, xlSH
Set xlObj = CreateObject("Excel.Application")
Set objArgs = WScript.Arguments
file = objArgs.item(0)
fileToSave = objArgs.item(1)
set xlWB = xlObj.Workbooks.Open(file)
xlWB.ExportAsFixedFormat 0, fileToSave , 0, 1, 0,,,0
xlWB.close False
xlObj.quit
Our company has designed a Excel Document for quoting purposes. The problem we are having is that certain sheets that are needed to do the quote do not need to be used after the quote is finished and saved. These extra worksheets are taking up a lot of room on our server. In the document I have already disabled the save feature so that the saveas has to be used. Is there code that can delete sheets 3, 5, 6, 7, 8 upon doing a save as?
View 4 Replies View RelatedI will have about 20 excel spreadsheets that will need to be run through some data cleansing and validation than each one exported to a csv file (without the column headings on them), and saved as the same file name as the spreadsheet was. If there are errors in the validation process then the one that fails (row) will be copied to an error log spreadsheet. There will be multiple worksheets in the error log workbook (one for each of the spreadsheets – which I hope VBA can create). What I am doing so far is creating a loop that will run on all of the spreadsheets located within a folder.
'Procucedure that will run all validation processes and error checking on extracteds spreadsheets
Sub RunCodeOnAllXLSFiles()
Dim i As Integer
Dim wbResults As Workbook
Dim wbCodeBook As Workbook
Application. ScreenUpdating = False
Application.DisplayAlerts = False
Application.EnableEvents = False
On Error Resume Next
Set wbCodeBook = ThisWorkbook
With Application.FileSearch
.NewSearch..............................
I'm not sure if this is possible but I want to be able to click print and after it has printed, transferred and cleared I would like it to save the purchase order and continuation sheet.
If this is being done on different computers is it possible for it to simply bring up the dialog box and the user save it where they would like?
Libby
I have a macro in a workbook that starts with one sheet (called Home Page), the macro opens other workbooks and copies sheets to add to the original workbook. When the macro has finished, I would like for a new macro to include all sheets into one PDF file. My problem the finished workbook will have a different number of sheets in it every time.
View 5 Replies View RelatedI have managed to pull together code that does the required task - save two sheets from a work book in to a new workbook on to a dorectory each day. However I woul;d liek to paste special the values and cannot figure our how to reference that on the below:
'saves text file in day on day folder
Dim WS As Worksheet, CheminDest As String, fNAME As String
'create directories as needed
On Error Resume Next
CheminDest = "T:DMRatesReportsChecks" & Year(Date) & ""
[Code] ..........
I have a workbook with roughly 28 tabs(sheets) and i need to be able to run a macro that will create a new sheet for each tab and name it based on the tab name.
View 9 Replies View RelatedI am moving some sheets into a new workbook and from the new workbook I want to prompt the user to save the workbook where they see fit. For some reason I cannot seem to save the new workbook only the old with the below code.
Sub Moving
Dim wb As Workbook
Set wb = ThisWorkbook
Sheets( Array("Hk", "Li", _
"SAM")).Select
Sheets("SAM").Activate
Sheets(Array("Hk", "Li", _
"SAM")).Copy
If wb.Saved = False Then
Select Case MsgBox("Do you want to save your changes?", vbYesNo Or vbExclamation Or vbDefaultButton1, "J & R Solutions")
Case vbYes
wb.Close True
Case vbNo
wb.Close False
End Select
End If
I have a multi-sheet workbook with a some raw data that I import into Excel from another system. I then perform calculations & summaries in one of 10 other sheets. In order to make it more readable, I world like put the company logo on the top of each sheet.
Is there a way to create a Input type of sheet that I put the logo in and then on each of reporting sheets do an ='Input'!location_of_logo_cell type of formula, in a similar way that I would pull data from that same sheet, like ='input'A1?. It becomes very labor intensive if I want to make changes to the logo and then copy it to every sheet.
I borrowed the macro below from this forum. My formulas in the sheets I'm copying refer to other sheets that I'm not saving. can someone tell me how to change it so that it copies values only to the new workbook as I'm only saving it for records purposes and some cells are saved with #REF errors.
I'm guessing there's a spot where I should type .Value ? Copy.Value doesn't work.
I want to copy 4 sheets and paste it in a new workbook and save it.
I have this code recorded
VB:
Sheets(Array("PIV", "Report")).Select
Sheets(Array("PIV", "Report")).Copy
But it don't work?
I have the below code that saves selected sheets of my workbook as pdfs in the current file location. What I would like this code to be able to do is to create a new folder (named with todays date), and then save each of the pdfs into this folder.
Code:
Sub SaveWorksheetsAsPDFs()
Dim sFile As String
Dim sPath As String
Dim fPath As String
Dim wks As Worksheet
[Code] ........
I have a workbook which consists of 28 worksheets, all of which are protected, and are running on a code which automatically keeps all sheets at "unlocked cells" in the selection field. The sheet is also password protected for write-access…
I would like a Macro, or some sort of code, that when activated… it unprotects ALL sheets (which use same password), creates a folder on the users desktop, and saves a copy of the document in there… entitled "copy of {filename}" It must also remove the "write access" password…
I have a fairly elaborate close-down routine for my workbook.
1) Quit out of fullscreen (restore initial state of excel before saving)
2) Hide all sheets but one (enforces cant do anything unless macros enabled)
3) Automatically save without a prompt
4) Close the workbook
I've researched it well and implemented it to the point where it works, but only if the user clicks the excel application close button -- the "X" in the titlebar (hence not in fullscreen).
However, if I launch the process via a userform button click, then for some reason the
DisplayFullscreen = False, Sheets hiding, and save codes have no effect (fullscreen persists, sheets are not hidden, no file is saved) in the Workbook_BeforeClose() subroutine....
I repeat: all the above works fine if process was launched by "native" excel button, but does not have any effect if launched from a userform commandbutton. (?!?!) any ideas what's going on?
I'm including my code so you can get an idea how it's structured.... by it's pretty "by the forum" as far as I can tell...
Private Sub CloseButton_Click()
If(1) Then
'Method 1 - close directly from userform command button
With ThisWorkbook
'.RunAutoMacros (xlAutoClose)
.Close
End With
Else
'Method 2 - set a timer to call a function to perform
' "ThisWorkbook.close" in a function outside of the userform
CustMenuCloseTimer = Now + TimeSerial(0, 0, 2)
Application .OnTime CustMenuCloseTimer, "CustMenu_CloseAction"
End If
End Sub
I am in the process of re-building a major project due to bugs. In the process, I plan to re-organize my sub-routine grouping within modules. In the source file, I have 18 standard modules, with 10-30 routines in each one.
What I would like is a printout of each routine name and which module it resides in, so I can check off each one as I copy it and paste it into the new file. I see that I can get a psuedo tree-view of my project in th eObject Browser, but can't figure out how to print that.
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
I am trying to make a save&close workbook macro.
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible.
If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
I have a workbook with say 20 sheets. Users enter all information via sheet1. All other sheets in workbook are populated with information from sheet1. The workbook is a template, so "save as" is used obviously. The example is this..
In one instance, user may require sheets 1,2,4,6,8,11,15 to be saved as new workbook, depending on what sheets they require. In another instance, user may require sheets 1,5,9,18,19,20 to be saved as new workbook, again depending on the sheets they need. Sheet 1 is to be saved with all new workbooks, so when user opens the new workbook some time in the future, they can edit data via sheet 1.
I'm trying to stear clear of the move/copy sheet way and make it as simple as possible, so even a hamster could do it (with training of course), i.e. click a button and a menu where you select what sheets you want to save, etc.