Search Using Combobox

Sep 23, 2009

I have a worksheet with List from sharepoint,I need to populate the data in another worksheet using combo box and using the same column that are in the list.

View 12 Replies


ADVERTISEMENT

Combobox Displayed Search

Jun 11, 2009

I like the way the names auto fill. Though would ilke to have it so say when roc is entered it shows as a dropdown so you can see that there are more than one ROCHESTER.

Like a search i guess, That would be valid to the first to letters. so if you had name donald, david & daffy when D is entered it showes all three then when DA is showes only David & daffy.

The project that i will 1st use this on is a contact address ph book.

View 14 Replies View Related

Filter Listbox With Combobox And Search Button

Aug 4, 2014

Attached small application. Open the application and click on the LISTBOX button. Code for the Filter by Item button or the Filter by Representative button. I would like to select an item from either of those dropdowns in the search box, click on the relevant button and the list box will populate to show the results.

For example, if I were to select Chocolate Bars from the dropdown and click filter by item, I want to see only the three lines [i.e. line 2, 6 and 7] present in the listbox, and I want to be able to doubleclick on any of those lines to go to the record if I wish.

Similarly, if I select Robert from the other dropdown and click Filter by Representative, I want to see the relevant three lines [i.e. 4, 5 and 8] relating to Robert, present in the listbox, where I can again double click to go to the record [i.e. the data entry userform related to particular record selected.

I have attached a file : Form.xlsm‎

View 3 Replies View Related

UserForm Combobox Wild Search Filter Based On First Letter Entry

Jun 18, 2014

I am looking to modify my combobox from a userform to Filter the list based on the first entry on what the user will add.

I have a code that will search for all entries in my "Control" sheet and passed this on to my combobox:

[Code] ......

I have, within a module, the following function code that the user find the entry by adding the first 3 letters of the search they need:

[Code] .....

I would like to know what to change in the function to filter the list, once the user adds a first letter and then press the dropdown from the combobox, to filter the list based on all entries from the first letter to only show entries with that letter.

If A is entered, then, show only the entries strating with the starting letter A, but at the same time if the user adds more letter to filter to the first then second letter:

If AB is inserted, then, show entries with AB only.

Where do I add this code also, is this another function or this could be inserted within my function?

View 7 Replies View Related

Userform To Search For Exact And Partial Values From Combobox In Database Worksheet

Jan 15, 2014

Below is my current code. The strFind1 searches for a name within the database and then I need strFind2 to do a exact for a Subproject search and a partial search for everything containing the Subproject selected and other Subprojects. Currently, when the database entry in the worksheet includes Subproject 1 the search function works but when I have an entry that contains Subproject 1/Subproject 4 it does not find the entry. How can I expand the strFind2 to equal what is selected in the Combobox2 and find entries that have what is selected plus more text. I have set the line where I think everything is going wrong to a bold format.

[Code] .....

View 2 Replies View Related

String Search - To Create A Combobox To Filter A Set Of Data By The Month That Is Entered

Jun 7, 2009

I am trying to create a combobox to filter a set of data by the month that is entered.

The below code worked fine when there was just the month entered, but now all the entries in the sheet are in the format 01 January 2009. So I need a section of code which will search for the combobox value as part of a string in my range.

The cbodate values are Jan, Feb, March etc ....

View 9 Replies View Related

Lookup Part Of Text String In Userform ComboBox And Search For Value In Sheet Range

Feb 12, 2014

I have a worksheet with following values:

A
B
C
1
Shorts
75

[Code]...

Also I have a Userform with 2 ComboBoxes named "ComboBox1" and "ComboBox2". Values in ComboBox1 is "Pull my pants", "Eat my shorts", "Socks for everyone".

What I would like to do is to search though column A and look for any of these textstrings in my selection in ComboBox1 and return the value from column B in column C.

Example: "Pull my pants" is selected in ComboBox1 then the value "pants" should be found in column A and value in column B (25) should be entered in cell C2.

I am fairly new to VBA and have spend hours searching Google and found some formulas like InStr and VLookup. My problem is that I am not sure if these statements will do the job and how to combine them.

View 1 Replies View Related

Populating Combobox 2 With Items That Match Criteria From Combobox 1

Mar 30, 2009

Am trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.

if column a = bears and column b = colours of bears then

when I select bears in combobox one, combobox 2 would populate with colors of bear.

I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.

I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.

View 9 Replies View Related

Auto Populate 2nd Combobox Based On 1st Combobox Data

Mar 30, 2014

I need to populate two combo boxes from excel sheet, the data will be like below:

Column A Column B
A 1
A 2
A 3
A 4
A 5
B 100
B 101
B 102

So from the above data, one combo box should hold unique values A & B.

On selecting a value from the 1st combo box A or B, respective values should be populated in 2nd combo box.

So the data should be like below:

If A is selected in the 1st combo box, then 2nd combo box should only show the values 1,2,3,4 & 5.
If B is selected in the 1st combo box, then 2nd combo box should only show the values 100,101 & 102.

Friends I need it in a macro and one important point is, this is dynamic and it is not static and the data can be more.

View 1 Replies View Related

Dismiss ComboBox Dropdown While ComboBox Code Is Still Running

Dec 8, 2009

When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?

View 9 Replies View Related

Filling Combobox Based On Another Combobox.text Value.

Jun 20, 2009

try and achive is when a user selects a item from the 1st Combobox the 2nd Combobox is the populated with the cell that is to the right of the selected item.

for Example if a user selects AAB from combobox1,, Combobox2 should populate with Belly.

Maby using combobox1_Exit for the excercise.

View 14 Replies View Related

ComboBox Selection That Fills A TextBox And Other ComboBox

Sep 28, 2013

I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.

Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range

[Code].....

View 2 Replies View Related

Populate Combobox Based On Selection Of Other Combobox

Jun 12, 2006

I have a table, headers "FirstName" and "SurName".

Further a Userform with 2 Comboboxes "FirstName" and "SurName"

I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.

Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.

View 9 Replies View Related

Set ComboBox Value Based On Text If In The ComboBox List

Feb 8, 2008

How can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?

View 5 Replies View Related

Set ComboBox RowSource To Result Value Of Another ComboBox

Nov 27, 2012

I have created a userform in which there are numerous Text and Combo boxes. In ComboBox 1 I have, in effect, a list of named ranges in a spreadsheet.

I want the RowSource for ComboBox 2 to equal the item selected (named range) in ComboBox 1.

VB:
Private Sub UserFormcriteria_Click()
Set ComboBox2.RowSource = ComboBox1.Value
End Sub

View 8 Replies View Related

Filling Two ComboBox Depending On Another ComboBox And ...

Jan 23, 2009

I want to fill two Combobox (cmb 2 and 3) dependent on what the user has chosen in a first ComboBox (cmb1).

The first combobox ist based on on the first sheet, and the second and third combobox shall be filled with values from other worksheet corresponding on combobox 1 selection.

I attached a xls to this post to explain better.

View 14 Replies View Related

Userform Combobox Value Selects Next Combobox To Appear

Dec 2, 2009

I have a userform with a combobox that has three items to choose from: Blue, Red, and Yellow. When a user selects one of those options, I would like another combobox to appear on my userform with a specific list for that option.

View 2 Replies View Related

Userform - Second Combobox Based On First Combobox

Apr 9, 2012

I'm trying to make a userform that has 2 combo boxes. I have just 3 columns right now.

Procedure GrpADA-QSI DescProcedure GrpAnesthesia And
Drugs9210-LOCAL ANESTH/NO SURGAnesthesia And DrugsAnesthesia And
Drugs9212-TRIGEM BLOCK ANESTHCrowns And BridgeAnesthesia And
Drugs9215-LOCAL ANESTHESIADenturesAnesthesia And

[Code] ........

I copied and pasted Column A into Column C and then removed duplicates. I named Column C 'ValList' and placed it in the RowSource for ComboBox1. What I now want is for ComboBox2 to populate based on my selection in ComboBox1. There are no duplicates in Column B. Duplicates are in Column A.

I also named Column A 'Proc_Grp' and Column B 'ADA_QSI_Desc'

For the properties in Combobox2, I left the RowSource empty. (that's correct right?) Because there's going to be a code that links Combobox2 to Combobox1... I think...

View 6 Replies View Related

Sum 2 Combobox's Values Into 3rd Combobox/label

Apr 8, 2007


is it possible to perform calculation such as sum,multiply value of 2 combobox and get it shown at 3rd combobox/label at userform initialize stage?

View 9 Replies View Related

Vlook Up: Combobox Shows The The First Column (only 1 Of Each) And The Second ComboBox Shows Me The Secondary List

Jun 9, 2006

I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.

View 4 Replies View Related

How To Create Search Macro Button That Allows To Search In Multiple Worksheets In One Workbook

Oct 11, 2011

Im am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do

Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then

[Code]....

View 1 Replies View Related

Search Multiple Worksheets Against List Of Non-Exact Search Criteria?

Nov 2, 2009

I have a workbook with many many sheets in it. The first sheet contains a single column with about 10,000 different values. I'd like to use each of these as search criteria against ALL data in the other sheets (of which there are a good 50 or so). If matches are found (they don't have to be exact case), then I'd like two things to happen:

1. The rows containing the matched search criteria in the first sheet are highlighted.

2. In the cells adjacent to the search criteria in the first sheet, hyperlinks to the matched data are created and named after the sheet upon which this matched data appears.

I've attached a sample file to this post with ideal sample 'answers' to queries made of the first 2 terms.

View 3 Replies View Related

Search Function (locate Data) Search All Sheets Within The Workbook

Sep 14, 2009

Using the search macro code below, could someone please help to add in more codes what I'm currently using, and also where to insert it. The Search function works well for what I need and it helps me to locate data. When using the search function somehow it search all sheets within the workbook but I only want it to search an array of sheets when using this macro that is needed to complete the task for what I'm after.

Macro
Public Sub FindText()
'Run from standard module, like: Module1.

Dim ws As Worksheet, Found As Range, rngNm As String
Dim myText As String, FirstAddress As String, thisLoc As String
Dim AddressStr As String, foundNum As Integer

myText = InputBox("Enter the text that you want to search for:", "Start Search!")

If myText = "" Then Exit Sub...................

View 9 Replies View Related

VBA: Search Function: Which Shows An Input Box Where You Can Enter A Word To Search For

Sep 9, 2003

I'm from Bavaria, Germany. Right now, I am doing an internship for my studies. my problem: I need a search procedure which shows an Input Box where you can enter a word to search for. It should work like the original Excel search (Ctrl-F), but with a simpler design, like with my own Text "Enter your Query" and a Button "Submit Query" / "Quit search". Is there the possibility to Highlight the Search Target? The problem hereby is that this highlighting should not be permanent. That means the user sees the target for which he searched for, the cell highlighted in a different color, etc. But as soon as the user clicks onto another cell, etc., the highlighting vanishes. If there is no fitting match, there should be a MessageBox like "Sorry the Target xyz cannot be found"

View 9 Replies View Related

Link Search Box With VLookup To Provide Search Result

Jul 15, 2012

What i have so far is:
-3 Sheets (Sheet1 - Search, Sheet2 - Data, Sheet3 - Result)
-Sheet1 has a userform ready to link up - this opens up when workbook and worksheet is activated.
-Sheet2 has some example data to search - the search is for column 1 (see attachment)
-Sheet3 has a template ready for the data to be pasted to.

I would like the search result is column 1 to copy the data from columns 1 to 7 to sheet3.

I want the template/layout to remain after the pasting of results. (everything protected from editing, if possible).

Once finished (ie go back to sheet1, i want the data from sheet3 to be cleared.)

View 9 Replies View Related

Using The =IF(ISNUMBER(SEARCH Function To Search Multiple Cells)

Aug 21, 2009

I' having trouble using the =IF(ISNUMBER(SEARCH formula to search multiple cells.

I can get it to work to search one cell (as below):

=IF(ISNUMBER(SEARCH("Same",G10)),"No Change",'Aug 09 Matrix'!F10)

(In this case the respone is No Change as Cell G10 contains "Same")

However cannot get it to work for several cells. I have pasted below and highlighted the function I would like it to perform:

=IF(ISNUMBER(SEARCH("Same",G10:R10)),"No Change",'Aug 09 Matrix'!F10)

Essentially the other cells in that row (G10:R10) all contain "Same", however for some reason it is identifying this as FALSE and putting in the data from the 'Aug 09 Matrix' sheet.

View 9 Replies View Related

Fill ComboBox With Cell Range And Link ComboBox To Cell?

Oct 15, 2006

I have two questions.

1). I have dates listed in excel (01/01/2006 to 12/31/2006) say from range B12:B376.

How do I get these values to a ComboBox.

2). If the above is possible and if I select a value in ComboBox say 08/07/2006, it should get updated in a particular cell say A1

So selection of 08/07/2006 in ComboBox, should reflect 08/07/2006 in cell A1.

Note: This ComboBox is on the UserForm and not on the Excel Sheet.

View 7 Replies View Related

How To Ask Formula To Search For Multiple Values Within One Search

Mar 4, 2014

I need one formula to copy and paste the checkcard data changing it from this "CHECKCARD XXXXXX5623" to "CHECKCARD 5623", but I need one formula to look for multiple known checkcard numbers. I will have more then one typically in the bank download so I need to search and copy at least two known numbers as shown below.

I am providing the formula that I am using right now, "=IF(ISNUMBER(SEARCH("5623",B3)),RIGHT(B3,41),"")" but it only works for one checkcard number? Also I don't really need to capture the DEBIT or CREDIT that will always be at the end, it would be redundant. If it's easier to write the formula including that data that is no problem. What I want to copy and move into an adjacent cell is in red.

Here is the source data:
Row 2 - SONIC DRIVE IN#1531 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX5623 DEBIT
Row 3 - JASON'S DELI # 125 Q64 AUSTIN TXDEBIT FOR CHECKCARD XXXXXX9718 DEBIT

View 4 Replies View Related

Combobox Linked With Other Combobox

Mar 18, 2014

I have one userform with combobox1 and combobox2.

Combobox1 have 5 names to choose from ( Alice, Matt, Carlos, Jennie and Lisa)

Also i have one sheet for each name with personal info on each row.

And every time I choose one name from combobox1, I wanted combobox2 to get that info from the related sheet.

View 4 Replies View Related

Populating Combobox From Value In Another Combobox

Dec 30, 2011

I am trying to populate a combobox (CboMilestones) based on the project number that appears in CboProjNum. I need the values of certain columns to be added to CboMilestones. My spreadsheet is laid out in a paticular order based on a SQL upload that I will have to perform (1st column = project number, 2nd column = milestone 1, 3rd column = must be blank, 4th column = forecasted date, 5th column = actual date, 6th column = Milestone 2, 7th column = blank, 8th = forecasted date, 9th column = actual date....this repeats all the way to milestone 160) I need CboMilestone to populate with all the milestones on the row of selected project number, and then I need TxtADate and TxtFDate to display the dates of the selected milestone for the selected milestone.

Below is a pic of my spreadsheet and a pic of the code i have so far.

[IMG]

[URL]....; base64,
iVBORw0KGgoAAAANSUhEUgAABLMAAALMCAIAAACQRGcbAAAgAElEQVR4n
Oy9W3TcxoHnDdmxdXmi33TO98KTp9nZmbN9xp+
/1cwoy86MM0PvjGc7m3jNxLkgjpzh2DMxkmhsbsaJkChKuFnHgmM7pmzJhmXKbut
iQTIlU9dGJFmkJEaCKImiRFEERV0oiZ
FAXWzqWt9DNUEQKBSARjcbTf5/53d40NWFQgFEs+
vPAroF4SvHha8cF77eJ3y9T/jWOeHJ88KT56c9ddFW+Oc/

[Code]...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved