Column A Column B Column C Column D Column E
WIN 2&1
WIN 6&5
TOT
0
WIN 6&5
0
Columns B and C contain no data
The above is represented only of a much deeper and wider spreadsheet, but should do for the purposes of requesting what I need to know. I want to be able to report the number of wins in column E, as a sum of the results in columns A through D all of which have alphanumeric characters in them; some may also be blank.
I have tried various functions to try and split, say WIN and 6&5, but have yet to find any solution to the problem.
i have a problem adding cells every 5th cell for example i have
=SUMPRODUCT((C10:C67)*(MOD(ROW(C10:C67),5)=0))
this adds every 5th row in this range and it does it right as long as there is no text in the cells in between
it works fine when it looks like this
1 1 1 1 1 1 1
but it does not work when it looks like this
1 1 text 1 1 1
when this happens it appears as #VALUE, meaning an error but i don't understand why if i'm just telling it to look at every 5th row and those specific rows have no text in them
i have a spreadsheet with text in between the cells that need to be added so i need a formula that only adds up the cells with numbers on it, to be specific the numbers are either ones or zeroes.....
I'm trying to find out exactly how I can use sum product on cells that have text and numeric values. Here's my sample data (6 points):
TN FX1576 20, TN FX1577 25, AZ FX1577 30, AZ FX1577 35, FW FX 1577 40, and FW 1577 45.
I wish to do the following: I want to sum all of the right numeric values based on the first two text values(TN, AZ, or FW). I want to sum these numbers to their respective total cells at the top of the page. So far I can sum the numeric values fine using the following formula: =sumproduct((right(range,2)*1) but when I try to differentiate between the respective locations (AZ, TN, or FW) I get an error message.
Attached is an example of what I'm trying to do along with the formula I'm currently using and yellow shading to represent where I want my respective sums to go.
I have one cell (B10) that will contain either "high", "medium", or "low". Based on one of these 3 values, I'd like to shade cell J15 a color with some white text. I got 1 of the 3 keywords working, not sure how to add in the other 2.
1) I am trying to find a matching value in a table. I have a 5*252 table that starts in B2. So the table goes from B2 to F253. I am trying to match a value in column D (column 3 in the table and column 4 in the spreadsheet) with a value in Column F (column 5 in the table and column 6 in the spreadsheet). The original value is in cell 222 in the table and cell 224 in the spreadsheet.
I tried the LOOKUP, VLOOKUP and HLOOKUP functions, but they return nothing but N/A. I use a reference cell or just the value for the lookup value but it does not work. I do not know if I am using the wrong formulas or what, but I have tried various permutations. (question 3 in excel workbook )
2) I am trying to calculate the standard deviation of a column D (contains both numbers and text) divided by column B (first in table). Excel does not appear to have a custom division formula. It has a remainder and a quotient formula which does not apply here. The problem is that the STDEV function does not allow for a division sign (/) in the formula. the STDEV function does ignore texts.
Is there a way for me to divide a cell ( containing both letters and numbers) by another cell just containing numbers and then taking the standard deviation of those values all in one formula?
I regularly run a report that comes out in a slightly different format each time depending on whether or not there is data for specific criteria. for instance (sample attached): criteria a, b, and c are in rows, 1, 2, and 3 in columns. a, b, and c are expected to repeat themselves several times. if there is no data in one instance of b then you may see something like abcacabc.
I'd like to loop through each row in column a, check to make sure that it is the correct value (either a, b, or c) and if not, insert a blank row so I can then copy the data to my final project without having to worry about formatting.
I am using the Find fuction to look for values in cells that contain text in both lower and upper case. I am comparing the values that I have stored in a lookup table. I am running into trouble when the lookup table doesn't match the text cells....
I have an excel file with some data in it. I have two columns with one of four words in it. For simplicity I'll call them RED, GREEN, BLUE, and Yellow. A few columns over I have columns "Same" "Good" and "Bad". I'm trying to figure out a way to get excel to put a 1 in the appropriate column, if cell A1 is Red I need excel to look at the word in cell B2 and put a 1 in the "same" column if A1 and B1 are the same word. If the word in B2 is Yellow I need excel to put a 1 in the "Good" column. If the word in B1 is GREEN or BLUE I need it to put a 1 in the bad column. The tricky part is each of the four words RED, GREEN, BLUE, and Yellow have a different set of words that will be called "good" or "bad". So if the word in cell A1 if Green for example it will have a different set of good and bad color words.
So it seems I need four different functions depending on what word is in A1. In the column next to these lists of words I have the date which I'll need to use to give me the sums of same, good, and bad for each day. But first things first. I think I need to use a combination of IF functions and MATCH function, but I can't figure out anything that works. Below is what I'm hoping it will look like when I've got the right formulas.
If this has been requested already, I apologize, please direct me to the right thread and flog me with USB cable. I've been searching the forum for an answer for a couple of hours now for the answer to this:
I have a list of words in column A on a sheet and I'm trying to write a formula on another sheet that will check all cells on a pre-populated row and return a value if any of the words from the list on are contained in any of the cells in the row. I've attached an example spreadsheet
I have 10 cells in a column. I have a drop down list in each that is the same in each. If all 10 cells have the same item selected from the drop down list, I want a separate cell to list Yes or No. I've tried a few variations with no luck.
I M trying to get the lower values between to cells and have the lower valued cell highlighted,,,i have over 43 thousand lines of data to go throughand i was wondering if there was a quicker way to do this,,,for example cellA1 is $4.25 and cellA2 is $5.25 i want cell A1 to be highlighted,,is there a way?
I am trying to find a formula that will count the number of unique entries there. I have tried the solutions posted on various websites to no avail (most recently:
Is there a macro that will allow me to create text to row from a comma separated cell, but also associate the cell to its left automatically?
The table below exemplifies what I need. The top of the spreadsheet is how my data is currently. The portion after the break is how I would like it to be.
refer to the attached workbook for reference. I am looking for a function in Sheet1, Column E that will search for the value of Sheet1, Column A within Sheet2, Column A. When a match is found, the function should look across Sheet2, Columns B - V for values of 1. When such values are found, the function should return the associated value from Sheet2, Row 2. There may be multiple values of 1, and as such, the function should separate values with a comma.
I am looking to automate a process where information is sent to someone in a text format and they in turn transfer that data to an excel file. It basically looks like this (but includes a lot more info):
Service Request #: 123456 Instrument Type: New Instrument Lot/Serial #: 123456 SR Type: Product Complaint Service Coverage: Maintenance Agreement
The info on the left (text preceding the colon) is always the same but the values following the colon can change. The excel file has all of the text before the colon and they just enter the information into the cells. I am looking to make it so that an Excel macro (or maybe a word/outlook macro) automatically scans the text document and sends this info to the exact same cells in excel every time.
The text file is actually a message from an Oracle database and I am not going to be able to make any changes to the way the data comes in.
I have two (2) different values in the same column one value is text (INV) the other is a time date stamp 05/18/2012 10:48:32. The text i want to return in a seperate column for these two is if it is INV then the result is "PENDING" if it is a date 05/18/2012 etc. then the result would be "PAID" example:
Payment Status 05/08/2012 10:30:12 INV 05/17/2012 08:27:37 INV and so on...................
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
I am trying to replace a range of cells with certain values but I can not figure it out. I'm almost there I think but don't know how to get the varying values I'm looking for. So I have a column (AJ in this instance) that has a bunch of "xx" values at different spots within the column. I want to replace those xx values with numbers 01 through 36. What I have below gets me just about there but it replaces every xx value with 01. How do I get it to go 01 on the first one, 02 on the second one, etc?
/code Dim cell As Range For Each cell In Range("AJ1", Cells(Rows.Count, "AJ").End(xlUp)) If cell.Value = "xx" Then _ cell.Value = "01" Next cell /code
I have some text in a cell, which is longer than the width that I am going to make that cell. When I don't wrap the text, it cuts it off at the end of the cell.
Since each column represents a day in a calendar, it would be incorrect to merge the two cells, but I don't want the text hidden, since I need to print the final product.
It is non-numeric text, and i've pasted --> values to remove formula issues.
I generated my urls to online photos, I referenced cells where some are only numerical (ex. 479) while others contain a numerical/text mix (ex. 3014-RACK). Here is my url code in excel...
I am trying to auto-populate text in cells in area A, based on data I enter into other cells in area B. I want the area A cells to be for display only, as all editing will be done in area B. The problem is: how do I do this such that the text I write does not get cut off if is longer than the column width? See the attached document for a clear example and description of what I am trying to do...
I try to write the function that gets some "ref" and returns appropriate item. For example: if I give to function "C3", it returns "AAA" if I give to function "R18", it returns "BBB" (cause it between R15 to R26) if I give to function "R9", it returns "BBB" also.
