This has to be easier than I am making it out to be!
I have column C as my selection column...so basically if they would like to see any items in rows 7-60, they can put an X in Column C and see an aggregate of those items.
What formula would I use to do the aggregate that is determined by input into column c?
I have a table of data which I would like to filter based on a manual cell input instead of the autofilter option.
The table has tickers in column B and has information from column B to U. I would like to filter the data based on a manual ticker that I enter.
In my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
Basic code I can embed in a user form?
I have 02 separate excel workbooks
01 = source file
02 = data list
The workbook "source file" contains all the data
The workbook "data list" contains data for work with Drop-down list. And i can easily select my required description by just dropping down the list.
In case, i have new description i add it in the source file and it is updated in the working "data list" sheet.
This applies to Field device column also. But i want to improve the selection criteria by creating such script or formula which could check the input of the description and automatically selects the field device and its relevant signal (output type).
Screen shot is attached : Automatic Selection.jpg
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
This macro is extreemly basic but i have no skills in excel with macros. Basically i have 'Column A' with stats that i need input into 'Column B', however i need then to be input inside a field that is already there.....
View 4 Replies View RelatedI want to create an input box that will allow you to input the column number it should start in... so instead of it being fixed at A, you can choose column B, C, D all the way to the end if you like.
Sub SplitSheetsNoDelete1()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
Dim Lmainsheet As String
Dim Lrow As Integer
Dim lcontinue As Boolean
Dim LColamaster As String
Dim lcolatest As String
'Retrieve name of sheet that contains the data
Lmainsheet = ActiveSheet.Name
'Initialize variables
lcontinue = True
Lrow = 2.....................................
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
If I have a table as noted below with the following assumptions:
- this table will likely grow
- the 'Include' column data will change based on external criteria/formulas, so the 'Include' column will not be sorted.
- Macros aren't an option as this sheet needs to be macro free.
A
B
C
1
Item
Calories
Include
[Code]...
How do I build a formula that I can place in a data validation drop down to only include 'Item's that have Yes indicated in the 'Include' column?
I've been researching this and found answers if the 'Include' column was sorted via offset, but I haven't found any to sift through when unsorted. I feel like there is a simple answer to this that I am missing. Here is the sheet --> ExampleSheet.xlsx
I'm trying to write a code that calculates 2nd column based on 3rd column's number or vice versa based on the condition set on the 1st column. Below, there are two procedures. "SimpleCalc" and "SimpleCalc2". I first wrote SimpleCalc2, but it isn't working, so I worked around the error by writing SimpleCalc, which selects a cell and moves around by offset. I personally find it hard to read and error prone as I develop more logic around it.
I'm trying to develop more function based on this code, so I need to make it neat and flexible. what I'm doing wrong in SimpleCalc2? Or do you have any suggestion to improve the code "SimpleCalc"? I'm using Excel 2003.
Sub SimpleCalc()
Dim SimpleMethodRng, SimpleMethod As String, i As Integer
ActiveWorkbook.Worksheets("Dashboard").Range("P5").Select
SimpleMethodRng = ActiveWorkbook.Worksheets("Dashboard").Range("N5:P12")
For i = 1 To 8
SimpleMethod = SimpleMethodRng(i, 1).........
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
Autofill column B with sequential values based on whether value in column A changes its value.
I would like to autofill column 'B' with sequential values (i.e. GenoMap1, Genomap2, Genomap3,... GenoMap10, GenoMap11, GenoMap12,... GenoMap104, GenoMap105, etc...), but changing to the sequential GenoMap# only when the value in column A changes.
This is what I imagine.
A1 "Alfiero", B1 "GenoMap1"
A2 "Alfiero", B2 "GenoMap1"
A3 "Alfiero", B3 "GenoMap1"
A4 "Allocati", B4 "GenoMap2"
A5 "Amaranto", B5 "GenoMap3"
A6 "Amaranto", B6 "GenoMap3"
A7 "Amaranto", B7 "GenoMap3"
A8 "Ambrosiano", B8 "GenoMap4"
A9 "Ambrosiano", B9 "GenoMap4"
A10 "Ambrosiano", B10 "GenoMap4"
A11 "Ambrosiano", B11 "GenoMap4"
I listed examples above of GenoMaps higher than 10 and 100 to show how I need them numbered.
I'm using MS Excel 2007 in Windows 7.
How would I count unique dates associated with another specific value on a worksheet?
For instance, Lets say I want to count each day a particular person makes a sale.
Example:
Sales PersonSale IDSales Date
Don 1001/6/2014
Don 1401/7/2014
Don 1601/8/2014
Jack 1011/6/2014
Jack 1021/6/2014
Mike 901/5/2014
Mike 1031/6/2014
So on another worksheet, I'd have:
Sales Person Days with Sale
Don 3
Jack 1
Mike 2
The Formula would go into the "Days with Sale" Column.
I have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
AB
1-May
1-May777
1-May
1-May
1-May
2-May999
3-May
2-May
1-May
2-May111
1-May
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
I have a worksheet (Sheet1) that is constantly growing with information. I have several categories under the "Category" column and then the various amounts under "Amount" column. I would like to have Sheet2 be able to keep a running total of the "Amount" column for each category as it increases in entries. I've attached an example sheet.
Example.xlsx
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I have a pivot that includes customer data and I need to create an average for each row based on the first populated column for each customer. After one month of units appears for the customer, I need to calculate the average going forward, and if there are blanks after that they should be treated as 0 in the average. Below is an example of my description of the pivot.
Jan Feb Mar Apr
Customer #1 1 1 3
Customer #2 1 3
Customer #3 2 2
So, the average for customer #1 would be calculated from Column B to Column E, and factor column D as a 0 in that calculation. Customer 2's average would start in Column C and go to Column E, and factor column E as a 0 in that calculation. Customer 3's average would start in column D to column E.
I have data like this,
Member
chr
location
web
1
50000
[Code]....
Now i want to select member column values based on the differences in values between members of location column should be 50000, it means if select web then my next selection should be SEB because next value (i.e web + 50000) is 100000 and it is matching to SEB in members column.
expected results
web
1
50000
[Code]....
I have a form in which users will manually enter a date in Column A. I would like to create a formula in Column B which will add 4 days to the date based upon Column A. However, the 4 days should only be added to a select set of dates which I would like to specify. If the date is not found in this select set of dates, then the result in Column B should be the same date as Column A.
View 3 Replies View RelatedI have a sheet with 3,000 rows and only two columns. Column "A" consists of 20 to 30 different names, column "B" consists of 50 to 60 different products. I need to be able to evalute the value in column A and copy, paste special transpose all values in Column B that have the same value in column A. As an example if cells A1 through A5 is "Arizona" and cell B1 is Broccoli, B2 is Cauliflower, B3 is Apples, B4 is Oranges, and B5 is Bananas, I want to copy B1 through B5 and paste special transpose to cell C1.
This then would need to loop all the way to the bottom of the data in Column A looking for a change in value. The attached file called Sample Data has two tabs. The one titled "report" shows the raw data, the one titled "Final" shows how I would like the results to appear (column L)
I have a problem which requires a vba routine that is currently outside of my level of expertise...
Here is an example of the data:
TESCO GARAGE 3729
59
REF 177 1092098207 BCC
59
CO-OP GROUP LTD
60
[Code]......
I have a worksheet with Coulmn A and B , wherein , Column A has a list of values that can be duplicated. Based on the values in Column A, I want to fill corresponding cells in Column B. see the attached.
way to accomplish the same. Tried VLOOKUP.
I have a column that repeats it self and I want to perform a count on Column B, based on the values in Column A.
Example attached : Book2.xlsx
I am trying to find a way to populate a column based on the changes in the data of another column...
For example, I want to fill in the code column....so when the customers cost changes, I want a numeric code to populate & change. So for the first 5 lines, the code could be 21, and then when the cost changes to $37.51, want the code to change to 22.
CodeCustomer's Cost
$34.10
$34.10
$34.10
$34.10
$34.10
$37.51
$37.51
$32.50
$32.50
$33.48
$33.48
$34.10
$37.51
$37.51
I am wanting to count the number of records (excluding cells with no value) based on criteria in a corrosponding column. In column "AS" I have a number of records that are not sorted showing values "7", "13" and "2".
In column "AL" there are values attached to some of these records based on certain IF statement conditions. I am wanting to count and sum the number of records in column "AL" that meet the conditions of "7" in column "AS" and so forth.
If i have the following layout of data
Column 1 Column 2
January 1000
January 1234
February 1300
March 1600
January 15
March 123
April 234
January 3000
I would like a formula that adds all the January numbers together returning a result of 5249
To move this one step further i would eventually need to add these numbers based on quarters, for example if the value is January February or March in column 1 then add the numbers in column 2.
I'm sure i have done this before using a countifs maybe but my mind has drawn a blank
I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.
View 1 Replies View Related