Sum Of Cells With Multiple Criteria
Jan 17, 2010i want to add the cells in column d, if column A=E1, if Column B=F1.
View 14 Replies
ADVERTISEMENT
Excel 2010 :: Counting Cells With Multiple Criteria On Multiple Sheets In Workbook
Aug 5, 2012I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
Pull Data From Multiple Cells And Concatenate In Single Cell Using Multiple Criteria
Aug 31, 2012I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
Populating Fields In Multiple Cells Based On Criteria In Multiple Columns?
Feb 24, 2014Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
Return Multiple Results In Multiple Cells Based On Criteria In Yet Another Cell?
Feb 1, 2012Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
Search Multiple Criteria If Match Append Multiple Cells To One Cell?
Apr 28, 2012I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health
How To Use Match And Multiple Criteria To Fill Multiple Cells
Nov 21, 2012I am using this formula but I don't know how to get it to populate more than one cell.
Here is the formula:
=INDEX(APPROVED!$A$3:$A$1000,MATCH($F$4&$H$1,APPROVED!$D$3:$D$1000&APPROVED!$C$3:$C$1000,0))
It has multiple matches but I can only see the first match in the cell.
Sum Of Multiple Cells Within Multiple Sheets With Varying Criteria
May 5, 2013I have a spreadsheet that has about 50 sheets and a summary sheet at the front the layout of the summary sheet is column A has skill sets from A4 to A20 and across the top it has week commencing dates from F3 to about BA3 (dates go from w/c 06/05/13 to 08/12/14). On the other sheets they have the dates in the same columns but the skill sets vary as to each project, some projects may have two of the same skill set in column A because there is two people needed who can do the same thing, I need to total up the days over the sheets for each week and skill set.
I have been using the SUMIF formula as follows:
=SUMIF('Sheet2'!A8:A10,'Summary'!A4,'Sheet2'!F8:F10)+SUMIF('Sheet3'!A8:A15,'Summary'!A4,'Sheet3'!F8:F15)
And so on for each sheet and then change the formula for the next skill set and then again for the next column.
Is there a way of doing this without having to enter a formula into each cell, at the moment I am coping and pasting the formula into word to do a find and replace to change the SummaryA4 to SummaryA5 etc and then into the next cell for the corresponding date.
So to make this seem like it makes any sense I am looking for say an 'Administrator' in all the project sheets over all the dates and for it to add it up for the summary sheet. Under the corresponding week against the skill set.
So it would be F4:F20 for w/c 06/05/13, G4:G20 for w/c 13/05/13 and so on until all skill sets.
Select Multiple Cells Based On Multiple Criteria?
Sep 25, 2013I would like a macro that select all cells based on multiple criteria. It's a big sheet, but I've made it smaller in the following example.
In row 1, there are 2 headers, in B1 (electricity) and C1 (gas) In column A, there are 3 houses, in A2, A6 and A10. The blocks of cells in between (e.g. B2:B5) have 2 headers, 'period' in B2, and 'account number' in B4. B3 and B5 have a list of options in them.
I want to select cells that meet certain criteria. Either electricity or gas, and either period or account number. So, if in cell D1 I choose electricity and in D2 period, I would like to select B3, B7 and B11. If I choose gas and account number, I wish to select C5, C9 and C13.
Sum Cells Multiple Criteria Different Sheet
Jul 9, 2009I have tried many options but can't seem to figure this out.
I have two tabs:
Trial balance and Analysis
On the Analysis sheet, I have a cell where I want it to look on the Trial balance sheet, find all codes these codes (7813.1, 7813.2, 7813.89) which are in column A:A, then give them the totals of what is in G:G.
Counting Cells With Multiple Criteria
Jan 23, 2010Column A contains "Power","Instr","EHT", Column AJ contains "25M32", "25M35","25M39"and the a date is in column AE. I need to count how many time the date appears in AE if column the cell in A is "Power" and the cell in AJ is "25M32".
View 2 Replies View RelatedCounting Multple Criteria In Multiple Cells
May 7, 2009In the attachment at the bottom of the page I want to count the symbols in the blue selected area when they are apear into the cells in the red selected area. The catch is that I want to treat the each of the "RED", "BLUE", "GREEN" as a single colum so to speak and have a value "1" or "0" apear in the back circled area.
Eg, For MrB there is nothing in the "RED" column (B7:D7) so that gives a value of zero in cell cell "P7". In the "BLUE" column (E7:G7) there is a circle which will give a value of "1" in cell "Q7". In the "GREEN" column (H7:I7) there is a double circle and a square symbol and that will return a value of "1".
I hope this makes sense. I have tried to do this with counta, but that will also count cells when a space bar is used and that makes it difficult to make sure that I am getting the right info. I also tried VLOOKUP and COUTIF but this is beyond my level.
Populating Multiple Cells By Entering In Criteria
Jan 29, 2010I am adding a sheet with a graph I made. There are two sheets, the first with the graph, the second with tables. What I would like to do is populate the graph based off what is entered into the tables. My main goal is to get the cells in the cells in the graph for each day to fill in color between the given time frame entered in on the table. Obviously I would be rounding up or down to make the time end in ":00."
The color I would like to fill the graph with is shown on the graph sheet. Also, if anyone can actually get this to work (I honestly wouldn't know where to start) Is there a way to have multiple colors and a possible overlay of colors?
Lets say on tuesday I have 10:00-15:00, and 12:00-18:00. Can I have two colors populate the cells and a thirs color populate the cells in the overlay which would be 12:00-15:00?
Count Cells With Multiple Text Criteria?
Feb 22, 2012I want to count cells that contain specific text but multiple criteria. For example in range B4:B12 I want to count the cells that contain the word 'daily' AND the word 'weekly'. Each cell in the range contains one word.
View 5 Replies View RelatedSTDEV With Multiple Criteria With Blank Cells
Dec 24, 2013I have trouble with calculating standard error with multiple criteria. Below is the formula I used:
=STDEV(IF($J$2:$J$25="A",IF($K$2:$K$25="B",IF($L$2:$L$25=1,M2:M25))))/SQRT(COUNTIFS($J$2:$J$25,"A",$K$2:$K$25,"B",$L$2:$L$25,1,M2:M25,""))
The problem is the blank cells in the range that I am calculating (M2:M25). Everything is alright if there were no blank cells in M2:M25. If there were any blank cells, however, the STDEV was wrong (the countifs part was correct). It treated the blank cells as zero.
Count Cells Based On Multiple OR Criteria
Jul 21, 2009I need to have multiple ranges count based on several criteria. The hitch is that needs to count if one or more criteria is met not all. I tried using a COUNTIFS however that seems to evaluate based on AND not OR.
Is there a nested COUNTIFS or similar function that would work?
Count Cells Matching Multiple Criteria
Jun 2, 2007I am using the below code to count records in a range that meet multiple criteria.
myCount=0
For Each dCell In Range("MyRange")
If dCell = var1 And dCell.Offset(0,-1) = var2 Then myCount = myCount + 1
Next dCell
Is there a faster way to count multiple criteria in a VBA procedure than what I'm doing, but without using worksheet formulas? I tried "WorksheetFunction.Sumproduct" like you would in a worksheet formula, but that didn't work (unsurprisingly).
Copy Cells Matching Multiple Criteria
Aug 28, 2007On my worksheet (which I have stripped down significantly to be able to upload here), I am looking for a way to copy certain cells over when the TCR (machine) numbers match. So, on the spreadsheet, if there is a 1 on the De La Rue sheet in the A column, it will then copy the value that is in cell B (directly next to it) and paste it into the balance sheet tab in column J in the row that has the same number in it. It would then do this for all machines in the balance sheet.
Then it would go to the "Ecoin Amounts" sheet, and do the same match, copy, paste, but this time it would be if the machine number matches, it takes the value from column D and the value from column H and pastes these into the balance sheet sheet in columns C and E respectively.
As you can see from the balance sheet tab, I tried using a VLOOKUP function, but when I import my initial data to the sheets, and manipulate it the way that I want, it gives be a reference error. I could possibly circumvent this by writing the VLOOKUP amounts as part of my macro, but I wanted to see if this could be done any easier.
Count Cells Not Meeting Multiple Criteria
Jan 15, 2008I have what I thought would be a simple task, but after almost a day of searching this and other sites, I've gotten no where. I have two issues that are similar. First, I need to edit my VBA code to count the number of blank cells in a column. Here's the code I'm starting with...
View 3 Replies View RelatedCounting Blank Cells In Range And Multiple Criteria
May 29, 2013I have the following table
Team>
Team A
Team A
[Code].....
I need to fill the following table in another sheet counting the amount of Blank cell there are according to Month, Team and if the name row is filled. I have tried Sumifs, sumproduct,countblank typing them in as arrays but don't seem to be getting anywhere
April
May
Team A
6
1
Team B
11
1
Multi-Criteria Sum Based On Multiple Column Cells
Dec 30, 2008I have a large worksheet that lists employees and the hours they work each day in a pay period.
For Example:
Column A holds a date and Column E holds the number of hours worked for a paytype. So i want to create some function that sums the numbers in column E, but only those where column A holds a date.
Then i want to return that number to a cell, say C20. I think I've managed to tell the macro which rows i want to return values from, but I can't figure out how to say "add these numbers together and put the total in C20."
I'll check this frequently if clarification is needed.
Formula To Lookup And Sum Cells Based On Multiple Criteria In Row And Columns?
Jun 17, 2014I would like to create a formula in a summary sheet ("sheet 2 section" in attached)that looks up and sum cells based on multiple criteria in row and columns in "sheet 1 section". I thought I sumifs would work, but I kept getting #value errors. I'm not a power user in excel. I attached the spreadsheet - it is only an example of what I want to do as the real data is confidential and large. The result I should I get is in section 2. Lookup account 12.251 for tim in the month of February - result is 14.
Test2014.xlsx
Formula To Report Back Cells That Meet Multiple Criteria?
Feb 16, 2014I've got a forecast from a customer and need to summarize it with part number, quantity and date.
The spreadsheet is part no in column a due dates in row 1 values at the intersection of part no and due date and i don't want 0 quantity to report back.
my output needs to be partno, date due, quantity.
Sum Cells In A Column Based On Multiple Criteria For Neighboring Columns
Jul 1, 2013Example data:
01/05/2013
150
Yes
01/06/2013
1
Yes
[code].....
Basically I'm trying to write a formula that will sum the total of the numbers from column B but only where the month equals June AND column 3 says "Yes".
So the answer would be 101, because rows 2 and 5 are the only rows of that table that meet all the criteria, and the sum of their column B cells would be 101.
I thought I was getting there with Sumproduct and Sumif but I'm now drawing a blank. There is a little extra complexity in that I'm actually pulling the month value from a set of cells elsewhere, but if someone can solve the puzzle above I hope I can do the rest on my own as it's just locations of data to pull from other worksheets really.
MATCH For Multiple Criteria While Ignoring Empty Array Cells
Nov 11, 2009I'm working with a large amount of data (A21:BZ1503) and I'm trying to identify unique situations where any pre-defined combination of multiple columns in one row is flagged by producing a pre-defined value. For example:
I have my pre-defined criteria in worksheet 'X' hidden in my workbook -- note that there are many blank cells.
Worksheet 'X'ABCDE1Dept.CourseInst.Adj.2AGSM1.23MATH101Professor1.44ENGL1051.65ENGLProfessor1.86ETST1002
On worksheet 'A' the various users enter data -- each row is a unique group with data entered into the columns -- again note a cell can be blank:
Worksheet 'A'ABCDE1Dept.CourseInst.Adj.2AGSM110Professor3ETST2204ENGL108Professor5ENGL105Lecturer6MATH101Lecturer..............................
Search Workbook For Cells That Meet Multiple Criteria And Return Results From Rows
Jun 28, 2013I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.
Create_List.xlsx
Lookup Multiple Criteria & Sum Result On Multiple Criteria
Oct 21, 2006I am trying to solve a problem. I am currently using this formula
= SUMPRODUCT(--(Sheet2!B2:Sheet2!B300="MARKETING"),--(Sheet2!D2:Sheet2!D300="200612"),Sheet2!E2:Sheet2!E300)
This formula works for me as it is but I would like to add more months to 200612. I want this to also be 200701 and 200702. In another cell there will be up to 10 months. Is there a way to do a Vlookup or something that will look up these months in another table, rather than keep typing them out in the formula?? Otherwise my formula will be very long.
So the info looks like this in excel
MARKETING 200612 -10
MARKETING 200701 -25
MARKETING 200708 -50
ECONOMICS 200709 -30
The info goes on and on. The two variables are the MARKETING column and the month column. My problem is that I would like a seperate table that can be the months. So 200612 and 200701 is one table, and 200708 and 200709 is another table. The table changes often so I dont want to mess with the formulas, rather a table.
Multiple Criteria SUMIF Using Column As Negative Criteria?
Mar 24, 2014I've attached a sample workbook to show what I am trying to do. I would like the formula to say "if Sheet2!A:A is "MON" and if Sheet2!R:R matches Sheet3!A:A, and if Sheet2!I:I doesn't match any of the values from Sheet1L:L, then I'd like the sum of Sheet2!F:F. It seems pretty simple but I've tried a million different variations of SUMIFS, SUMIF, IF, AND, etc. and I can't figure it out.
View 1 Replies View RelatedMacro For AverageIFS With Multiple Criteria In Same Criteria Range
May 18, 2014Macro for AverageIFS, with multiple criteria in the same criteria range....
View 9 Replies View RelatedMultiple Criteria Count Between 2 Dates & Other Criteria
Jul 30, 2008I have a spreadsheet which lists letters issued, the date issued and the potcode. I need a formula that counts, on a weekly basis, the number of letters issued to postcodes in Sutton and Bexley.
I have a count sheet set up on one worksheet and the list of postcodes applicable to each area are listed on another worksheet. I have been playing around with sumif, sumproduct etc, but these don't seem to work as I am pointing the formula to a list of postcodes and not an individual postcode. For example, the formula for one week needs to tell me, the number of letters issed to Sutton between 26/07/08 - 01/08/08. This is what I tried -
=SUMPRODUCT(('MU63 NC'!$F$2:$F$10>=COUNT!B$2)*('MU63 NC'!$F$2:$F$10<=COUNT!B$3)*('MU63 NC'!$D$2:$D$10=Sutton!$A$2:$A$50))
But I get #N/A - if I change the last refernce to a specific cell instead of a range it works, but this will make the process very lengthy as there are lots of postcodes!