On my worksheet (which I have stripped down significantly to be able to upload here), I am looking for a way to copy certain cells over when the TCR (machine) numbers match. So, on the spreadsheet, if there is a 1 on the De La Rue sheet in the A column, it will then copy the value that is in cell B (directly next to it) and paste it into the balance sheet tab in column J in the row that has the same number in it. It would then do this for all machines in the balance sheet.
Then it would go to the "Ecoin Amounts" sheet, and do the same match, copy, paste, but this time it would be if the machine number matches, it takes the value from column D and the value from column H and pastes these into the balance sheet sheet in columns C and E respectively.
As you can see from the balance sheet tab, I tried using a VLOOKUP function, but when I import my initial data to the sheets, and manipulate it the way that I want, it gives be a reference error. I could possibly circumvent this by writing the VLOOKUP amounts as part of my macro, but I wanted to see if this could be done any easier.
I am using the below code to count records in a range that meet multiple criteria.
myCount=0 For Each dCell In Range("MyRange") If dCell = var1 And dCell.Offset(0,-1) = var2 Then myCount = myCount + 1 Next dCell
Is there a faster way to count multiple criteria in a VBA procedure than what I'm doing, but without using worksheet formulas? I tried "WorksheetFunction.Sumproduct" like you would in a worksheet formula, but that didn't work (unsurprisingly).
Modifying the following line by replacing the row number in AC2 and Q2 by an incremental variable? I mean something like “AC”&Rw , “Q”&Rw, &Rw, Rw being my incremental variable used to go through the rows.
setup a vba code to find values which were separated by a certain value, thus there would be pairs of numbers sought after. What occured was that the first value is bolded, followed by the second not bolded, this pair would be separated by 75. Now I want to apply the same code, but instead of copying just the two cells which were separated to someone on the current sheet, I would like it to copy the entire row (as there is more data associated with it now) with the same bold/not bolded pairing to a new sheet, called "Numbers". I would imgine it be straight forward, yet I am very new to this and still tinkering.
I'm trying to create an overview which shows a breakdown of the total minutes for each task on each given day.
I need to get a formula to work in the grey area which sums the total minutes (column C) based on matching two criteras of task (column A) and day (column b).
I have a spreadsheet where I want to match the PO info with the invoice info. I want to match the cost center, location, PO number, item number and the price.
Period Cost Center Account Item No PO No Amount Test
As you can see in that the formula is showing the first 4 rows with a difference even though that the difference is in the first two. How can i fix this?
My second question, on the lines with the 989.04 difference, how can I make the same formula to say "Fix the account" or to fix the column with discrepancy
I have been asked to analyse the contribution / performance of each student in a team. What i am trying to do is to count the number of times each student has work together and then try to work out their contribution. Got stuck on the 2nd bit for like 3 weeks flat. have been trying but not luck... seems to give me 1 or 0. so i assume my attempt is only a true or false answer! All i need is a count of how many times each student work with each other, and the best backbone formula is "count". This situation is best explained by my example, D15 is the closest i got
I've got an array of data about 30x1500 cells in size, I want to use this data in a table I'm making on another worksheet.
Normally I'd just use VLOOKUP and this works great in most cases but I want to do something a little bit more complicated. Basically I want to (in normal English) have excel look at the table, find a cell that matches criteria in this data array, then compare to another cell on the same row in this array. If the criteria for these two match then display the data from another cell on the same row. The criteria for matching the first cells would be an exact value, both being strings of text.
I've tried using a couple of nested VLOOKUP and IF statements but failed .....
I have a spreadsheet schedule that pulls quantities from another spreadsheet's cells. if the part number of the reference row matches the schedule cell's part number (row), and the date of the reference cell row is 2 workdays after that of the schedule cell's column, the quantity is put in the right place in the schedule. that part works. the problem I have is that sometimes there is more than one quantity with the same part number and date (due to the parts belonging to different jobs). when this is the case, only one of the quantities is picked up by the schedule. i want the schedule cells to sum the quantities of the reference file with matching criteria. i also don't want to have to change the reference file at all in order to do this. below is the function that works (besides summing the duplicates). the part after the " " is what i would need to alter.
HXS is the reference file where D is the part number column, I is the date column, and 5 is the index column referencing the quantity.
C is the part number column in the schedule K is the date row in the schedule ....
Currently I have two tabs one with six columns of data. On a separate tab I have a matrix of two of the criteria. I would like to map the company data to the matrix, but recognizing the primary representative has more than one company he/she manages. Hence I don't just need the first entry, but all of his/hers maps to the size columns.
I am developing Spreadsheet that you will enter a list of parts that you need. it will have many columns but only 4 are vital to the check. this will be generated for each project.
With each part i want to then look up in another file that is a list of all the possible parts you can have with there cost. this file will be standard for everything and it will be updated from time to time.
now not all the criteria to look up will be exact matches.
here is an example
code temp/pres rating diameter material GLV 4500 15 16Mo3
in the other file we will have multipu entries for GLV with different values.
For Code i need it to match (there are lots of codes even including variations like GLV.) For Temp/pres rating i need it to be equal or higher to the value For diameter i need a match for material i need a match.
so as you can see from the list above there are 2 options. so then i want it to return the cheapest.
that is step one.
step two is to repeat it for multiple list of parts.
[Date] [Category] [Currency] [ExchangeRate] [.....], etc. 1-3-09 A USD 0,8 1-6-09 A EUR 1 1-7-09 A USD 0,7 1-8-09 B USD 0,9 1-9-09 B USD <formula>
I'd like to have the value of <formula> looked up in older records. Currency and category should match and it should pick the exchange rate with the maximum date.
Which formula and what syntax should I use to have this done?
I am working on a spreadsheet for a shoe company. I have separate columns for the size, model, color, and item number of a shoe. I get everything except for the item number from a written document; I then have to find the item number for the shoe from another excell document called the Master List.
I was hoping there would be a way to have Excell auto-fill the item number for me. For example, if a shoe is a Red, Athens (the shoe model),size 12, its item number (which can be a pain to find) listed in the row of the Master List is aaabbb. So I want to just enter in the size, color and model number, and have Excell find the item number for me, and fill it in.
I have enclosed an example. Sheet 1 is the sheet I would be working on. Sheet 2 is a portion of the Item master list, which is actually 50k lines.
I have a sheet containing a list of client name,the date they've been assigned, the type of account they have, the status of the account, and the last update date.
What I'm trying to accomplish is to extract the client name and the type of account on that table that shows as "complete" in status. However, it gets complicated since I need to separate the data that had been 'completed' under the same month, with those completed the other month.
For example, I have been assigned 2 clients this January. I closed one in the same month, and the other closed at February. The first client would be listed under the first table (Completed within the month) and the other would be on the second (Completed on previous months)
Since this would be monthly, I am thinking if it would be more efficient to include the table per sheet (as one sheet corresponds to a month), or consolidate everything to a single sheet... I'm not sure which one would be best.
I have two workbooks at the moment, one which holds a whole host of customer and accounts details and another which holds only the customer details. What I'm trying to do is cross reference the two to determine if a customers details appear on both and if they do highlight this, ultimately I'd like it to pull the customers account number back but even if it highlights a match that would be sufficient.
The only unique criteria I have to do this are customer surname and customer postcode.
In the Customer details spreadsheet I'm attempting to enter a formula which will look at the specific surname & postcode held on the row in which it is entered. It will then look at all of the rows on the other spreadsheet and determine whether any of them meet both criteria.
If they do I'd like it to display "match" if they don't I'd like it to display "no match"
How would I write a sumif function to only add consecutive cells that match the criteria? Here is the formula I am using right now, but it adds all of the cells that match the criteria, not just the consecutive ones. Also they need to be consecutive cells from the current cell (in the formula below i would be referring to A80)
=IF(A81<>A80,SUMIF(A$5:A80,A80,H$5:H80),"")
More data:
Column A is a group of dates, but not in order, they are slightly mixed up Column H is a monetary value.
How do you load an array with values from cells matching a criteria?
I want to look for the number 1 in row 5 and put the Adjacent values in Row 2 in an array. So here my array should have 1,3,6
Dim CountOne As Integer CountOne = Application.WorksheetFunction.CountIf(Worksheets("Tool Administration Form").Range("B8:AE8"), "1")
Dim All As Variant Dim rCell As Range Dim ArrCnt As Integer Dim lArrVar As Long ArrVar = 0
Do For Each rCell In Worksheets("Tool Administration Form").Range("B8:AE8") If rCell = 1 Then ArrCnt = ArrCnt + 1 All = Cells(-3, 0).Value End If Next rCell
Loop Until ArrCnt = CountOne I keep getting errors... I don' tknow how to fill the array properly wiht the values in the cells.
Example: A B C D E F G 1 2 1 2 3 4 5 6 7 3 4 5 1 2 1 3 3 2 1 4
I want to read information from the "Mapping" sheet, then find information in the "GLEX" sheet that correspond to the read information, then copy the information that was found in "GLEX" to the "Calc" sheet and add it all together and display the sum in a particular cell in the "Report" sheet.
The "Mapping" sheet is a mapping of information to show what makes up a particular total and where it must be entered in the "Report" sheet. The "GLEX" sheet is the output from a financial system and the source of the information that must be "reformatted" to the "Report" sheet. The information is only an extract as the whole totals to around 10MB. I have also deleted the "Report" sheet as it is fairly big on it's own, but the principal will be the same, I think. (If i should upload the "Report" sheet,)
Step 1: "Column A" and "Column B" of "Mapping" are the starting points. The macro must read the values in "Mapping" "Column A" and "Column B" and remember them. Then it must find the row in "GLEX" "Column A" where the information from "Mapping" "Column A" matches and where the information from "Mapping" "Column B" matches with the information from "GLEX" "Column E".
I am attempting to place a formula in cell b3 in the attached spreadsheet on the "sheet to pull data into" tab 1 (cell is highlighted yellow) to retrieve value in the yellow highlighted cell in the "Sheet that contains data" which is on a seperate worksheet within the same workbook.
The cells highlighted red in the "sheet to pull into" tab (cells: a1, a3, b1, and b3) are the criteria that needs to be matched to those cells on "sheet that contains data" tab in order to ensure the value returned is correct.Sample of problem.xlsx <----see the attached sample spreadsheet.
I am trying to copy a row based on the value of a cell.
I have two sheets in my workbook and on sheet 1, I have a part number and a description. On sheet 2, I have part numbers again, but this time I the description is broken up into the format I need.
What I am trying to do is have excel search on sheet 2 for the part numbers, then copy the information that corresponds to the part number into the correct column.
I have tried using Vlookup. But if the part number in row 2 on sheet 1 match the one in row 8 on sheet 2, this will copy over the data from row 2 whereas I need row 8.
If this would be more doable using VBA, that is fine by me. I haven't been able to figure out anything in VBA or in excel formulas up to this point.
I have two ranges AA:DD and F:G, I have to find matching pair in AA:DD and in F:G and copy H and add as a comment to D, its hard to explain. see my attached workbook.
Right there data in cell A1 lets say LTP BY001 and then the next data in column A is LTP BY002 in cell A9. What I need to do is copy LTP BY001 from cell a2-A8 and then LTP BY002 From A10 until LTP BY003 appears lets say A15. Therefore need LTP BY002 copying from A11-A14. I need that to go right the way down the workbook at everytime their is a number change.
I have 2 worksheets, A and B. In both worksheets there is common data in column A (account ID). I would like to find a way to return all of the data for the matching row in worksheet B and have it pasted into the matching row in worksheet A.
So in the example below, I am looking for a function that will match on Account ID in both worksheets and then paste the results from Dataset 1, 2 and 3 into the row with the matching Account ID in worksheet A.
Worksheet A Account ID Column to paste matching rows from Worksheet B
1
2
Worksheet B Account ID Dataset 1 Dataset 2 Dataset 3
I have an Excel file with multiple sheets and I want to find and replace matching cell data on the same row across all of the sheets. For example, I have two columns, Column A and Column C and 10 sheets. I want to only replace the content in Column A if text matches both Column A and Column C on the same row. So, I want to be able to search for the following data across all sheets:
Column A = "car" Column C = "yellow"
If both "car" and "yellow" are found in Column A and Column C on the same row, then replace "car" in Column A with "truck".
Is there a way to do this automatically as I have few hundred to find and replace?
1. Copy data from original file (I do not want to do anything in the original file) into the spreadsheet (Target worksheet)where the code should run. 2. In sheet 1 of Target Worksheet, there are 2 columns which I need to set criterias on namely Column D and Column L 3. In Column D, I want to specify 3 criterias namely A, B and C 4. In Column L, I want to specify 5 criterias namely London, Frankfurt, New York, Sydney and Tokyo 5. If Criterias in 3 and 4 are met, copy all rows into Sheet 2 of Target Worksheet
I'm trying to find a way to search a second sheet in a workbook for specific criteria outlined in a first sheet (in my attached example, from A3 downwards within the 'list of search criteria' sheet), and then to copy any secondary data found against a successful search match to the original sheet, transposed against its corresponding matched search term.
As you can see in the example, the search term 'bindi' (A4 in the 'list of search criteria' sheet) appears in the 'data' sheet 3 times - the secondary data for these occurences ('feathery', 'Fibonacci', 'glassy') is copied to the 'bindi' row on the first sheet and is offset with each copy to produce a transposed-esque effect of copy and paste.
If it's any help, there are a maximum of 9 matches for a single search term in the real document.
Thanks in advance for your help... I tried to adapt a previous solution given to me for a similar question but failed miserably. I bow humbly to your expertise!
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background: -- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook -- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing. In the entire workbook, I want to add 1 (counting function) only when: R1=2 AND E1>F1 or S1=2 AND G1>H1 or T1=2 AND I1>J1 U1=2 and K1>L1 on each appropriate sheet in the workbook.
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project Benefit Type Delivered or Enabled Benefit
PJ1 Financial Delivered Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered Financial - Enabled Tech - Delivered Tech - Enabled Green - Delivered Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4 89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
