Updating Multiple Cell Values ..

Sep 3, 2008

I am having trouble writing a code for something I need to do. There is a workbook with a worksheet for each month. At the start of every month a new worksheet is added. The opening data in this new worksheet is coming from the closing data of previous month, and some of this data is modified as the month passes.

So, in a way, some of the data for each month depends on the data of previous months. If there was an error in one of the cells, for say, January, and it was corrected manually, it will affect the cell values for feb, march, and so on. Currently, its all a manual process - from copying previous month's data to a new worksheet, and manually correcting errors in each worksheet, which is error -prone and a time consuming process. Is there any way to link each month's data and create an "update values" button clicking on which will update the values for cells in every month's worksheet following the one which had errors in it and was manually updated. It has to one directional.

View 9 Replies


ADVERTISEMENT

Updating Cell Values Automatically

Jun 19, 2014

I'm using this to update a range of cells after an automatic copy and paste procedure;

Code:
Sub UpdateBtoW()
On Error GoTo HandleError
Application.Calculation = xlCalculationManual
Sheet74.Activate
Dim cell As Range
For Each cell In Range("B1:B50000")
If Not IsEmpty(cell.Value) Then
If cell.Offset(0, 14).Value = "" Then

[code].....

What it is supposed to do is look in column B and find any non-blank cells. If it finds one, it should check the following and update column W as necessary;

1) Column B shows 1, column P is not empty, column W is empty - UPDATE COLUMN W WITH 'Letter 1'

2) Column B shows 2, column P is not empty, column W is empty - UPDATE COLUMN W WITH 'Letter 2'

3) Column B shows any value, (not blank), column P is empty, column W is empty - UPDATE COLUMN W WITH 'N/A'

The issue is that it is updating the cells as required, but it then goes on to fill the entire sheet with 44819 in every single cell.

View 4 Replies View Related

Updating Number In A Single Cell From A Series Of Values In Column?

May 22, 2014

I am trying to read a value in cell A1 and make say cell B1 read the same. The data in cell A1 is a real time percentage value that gets updated every lets say 10 secs. Every time the data is updated the new value goes into the next cell A2, A3, A4..... and so on. Every time it gets updated (i.e into A1,A2,A3,A4.....and so on), I want to read the new value each time in B1.

View 9 Replies View Related

Updating Values On Three Sheets

Jul 1, 2013

I have three sheets of data which require different values. What I'm looking for is for the other two sheets to be updated when I change the values in the field 'Option_Group_IDs' in the productdata-army-to-merge.csv file.

The two fields in the other two sheets to update are the optGrpID filed in the optiongroup-data-army.csv and the optGroup field in the optiondata-army.csv

productdata-army-to-merge

*
A
B
C

1
Remove_Product
Additional_Section_IDs
Option_Group_IDs

[Code] ..........

View 1 Replies View Related

Updating Spreadsheet Without Copying Values

Aug 4, 2014

I am trying to copy a set of data (lets say workbook 1) into a new workbook(workbook 2). Both files are saved in the same directory.

Workbook 1 will be continually updated with new row additions and some changes in text in the rows. I want to copy these new changes (from workbook 1) without having to copy and paste the new additions into workbook 2, as it is wasting a lot of my time.

Is there a trick in excel to automatically do this?

View 2 Replies View Related

Label Values Not Updating, But Chart Is

Oct 17, 2005

I have a number of charts (mostly pie) I don't have a legend, but I do have "Show label and percent" selected.

When I add in new data the actual chart updates to show the right sized pie slices... but the values on the labels don't update as well. I can't figure out how to make that happen?

View 9 Replies View Related

Updating Named Range Values

Nov 13, 2007

I am working with a worksheet that has hundreds of named ranges already in-place. When the creator defined these ranges, they defined them all statically. I would like to update each named range to be a variable named range.

I was thinking about doing a massive find / replace in the VB Editor, but I can't seem to find the named ranges. I assume they were defined from within Excel by the Insert > Name > Define method, and not through VBA and that is why I can't find them. Is there any way to simplify this process instead of manually trying to update each and every range?

View 9 Replies View Related

VBA - Copy Range With Multiple Same Values Based On Other Cell Values

Aug 31, 2012

I want to build a database where the user can select a specific time period. I have a static file with the time periods and the related values. For instance I have in column A1:A15 the time periods from January 2011 to Dezember 2011, but I have some dates multiple times as there are more values attached to it. For instance I have in the first 4 rows January 2011...what I want is when someone puts in the value January 2011 in cell B1 and Dezember 2011 in cell B2 that the whole static file gets copied to another location (including the multiple dates) displaying the chosen time period. Similarly if someone puts in the value March 2011 to November 2011, I want only those values to be copied.

View 4 Replies View Related

Multiple Options Cell Values Based On Multiple Criteria Variable Inputs?

Mar 18, 2013

I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.

I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).

The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.

As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.

The log code in column "H" Is based on this criteria:
First Letter of the Unique ID in column "E" - O, M, or L
Program Type in Column "F" - U or R
1. O-U = U
2. O-R = RU
3. M-U = U2
4. M-R = R2U
5. L-R = R

You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.

This is the area where my skill at using scripting dictionaries fails.

The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words

if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")

So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)

Here is my code so far.

VB:
Option Explicit
Sub test()
Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long
Set dic = CreateObject("Scripting.Dictionary")

[Code].....

View 1 Replies View Related

Updating Excel Table Values Into SAP Tables

Jul 23, 2012

I want to write a interface program using VB Macro, for updating the Excel Table values into SAP Tables. Is there any macro that can do this work?

View 4 Replies View Related

Automatically Updating Numeric Values In Textbox

Jan 15, 2007

In the userform I have several textboxes with default values. There are five text boxes that the user can modify and three whose values I want calculated based on the values of the five modified. This is how I initialized the userform :

Private Sub UserForm_Initialize()
Workbooks("Main.xls").Activate
A_BB_and_HBP.Value = Worksheets(5). Cells(2, 35).Value
A_H.Value = Worksheets(5).Cells(2, 36).Value + Worksheets(5).Cells(2, 37).Value + Worksheets(5).Cells(2, 38).Value + Worksheets(5).Cells(2, 39)
A_2b.Value = Worksheets(5).Cells(2, 37).Value
A_3b.Value = Worksheets(5).Cells(2, 38).Value
A_HR.Value = Worksheets(5).Cells(2, 39).Value

Worksheets(5).Cells(2, 41).Value = A_BB_and_HBP.Value
Worksheets(5).Cells(2, 42).Value = A_H.Value
Worksheets(5).Cells(2, 43).Value = A_2b.Value
Worksheets(5).Cells(2, 44).Value = A_3b.Value
Worksheets(5).Cells(2, 45).Value = A_HR.Value
A_AVG.Value = CStr(CSng(A_H.Value) / (130 - CSng(A_BB_and_HBP)))
End Sub

Then I have :....................

When the user changes A_H, A_AVG remains at its default value.

View 2 Replies View Related

Vlookup Multiple Values Then Concatenate All Values In One Cell?

Jul 23, 2014

two formulas for one data set. The data is attached in the spreadsheet: "Product IDs". The data is a set of Master Product IDs (parent) and the Linked to them Products (children). I need to create a relationship between unique parents (Master Product IDs) and their children (Linked Products)

I need to create two formulas:

1. From the Data Set table, need to vlookup the unique value in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). So, the result will be as shown in Table 2.

2. From the Data Set table, need to vlookup the unique (de-duplicated) parent/children relationship in column A (Master Product ID) and return comma delimited (concatenated) corresponding values from column B (Linked Products). There are total 3 parent/children relationships in Table 1. So, the result will be as shown in Table 3.

View 8 Replies View Related

Paste Multiple Cell Values From Multiple Workooks Into One Workbook

Oct 30, 2009

I’ve got a folder on drive C named “Customer Sheets”. In this folder at any time there could be over 500 individual customer sheets. i also have a "Summary Workbook" on drive C

What I need is a macro in my "Summary Workbook" that copies cells (“B3, B6, B12, B13, G5, G6”) form every customer sheet in my “Customers Sheets” folder and paste it into my “Summary Workbook” onto sheet2, every customer in a new row.

The “Summary Workbook” should run this macro every time it is opened or on my command so that the database is continually refreshed when a new customer sheet is made.

View 2 Replies View Related

Match Value Of 1 Cell To Multiple Cells And Give Multiple Values

Oct 7, 2006

Sheet 2 is the problem.

I need to match cells e3:h3 whenver the dates change in in cells c5:c9 and then put there result of cells b5:b9 into the corresponding cells of e5:h9.

Basically what I'm saying is that I want to keep a track of all previous pay amounts from each pay period. So when the next period changes the date it also copies the new pay amount to the corresponding date of the previous pay section.

I have included a sample.

View 9 Replies View Related

Updating Multiple Series' On Chart

Nov 18, 2008

I have a chart with 3 series':

Series1
Series2
Series3

The chart is called chtEngagement. I want to use vb to update these series'.
Series1 should be shown as:

View 5 Replies View Related

Automatically Updating Multiple Sheets

Jun 22, 2007

I would like to make my stock sheet able to copy entres to another sheet within the same work book. (avoiding using VB as I can't do that)

If data is entered in sheet2, it is automatically copied onto sheet1.

The reason is that each storage device will have its own sheet and all entries will automatically be copied to the master sheet. This will make things easy for the people who need to use this system for updating and seaching it.

I have seen a similare problem that seems much more complex here @ Copy Data From Multiple Closed Spreadsheets

View 6 Replies View Related

Macro-generated Values Not Updating Charts And Sums

Jul 5, 2006

The question is pretty much described in the post title. Here is the situation:
I have a workbook that has data plugged into it manually throughout many sheets, and at the end there are a few sheets with different graphs and charts that are generated by a macro. This macros works perfectly - all the data is accurate and the figures are perfect when compared with a manual count. The problem I have is that the cells where the macro puts the summed values are in a chart that is supposed to create a bar graph. Normally, if I change a value that a bar graph uses I see the bar graph change - but that does not happen with the cells that have values placed in them by the macro. I also have a section that sums the values in the chart to make sure it's running right, and these values do not update automatically as well. The cells have the formula =SUM(B3:B12) and so on, in them. Right now, every time that I run the macro I need to go into the cell with the formula, hit 'enter', and then it does the summation. Is there a way to correct this problem, or is this something that is part of excel?

View 4 Replies View Related

Search Multiple Values In A Cell With Multiple Criteria

May 22, 2009

I am trying to search for multiple values in a cell with Multiple criteria.

E.g: Please find attached the sample excel data.

I tried using VLOOKUP which is not working as I am having multiple values in column A.

View 9 Replies View Related

Split Multiple Values In A Cell To Multiple Rows?

Mar 4, 2013

if there is a way to split multiple values in a cell to multiple rows. example check the attached sheet, macro/function with in excel etc.

View 2 Replies View Related

Multiple Users Updating Same Sheet Simultaneously?

Jul 17, 2013

I have a workbook with a list of drawing numbers (with customer, date, author etc.). New drawing numbers and their associated row of information are entered onto the sheet...

..HOWEVER, multiple users can be at least viewing and potentially entering information simultaneously.

I have written code where multiple people can view the same read only file, but not edit it and it be updated.

It seems quite unlikely, but is there anyway of 'live' updating a workbook whilst multiple people are viewing it? Or at least notifying other users when the sheet has been updated?

View 2 Replies View Related

Updating Multiple Chart Options (e.g. Title)

Apr 2, 2007

Is it possible to update Chart Titles in Batches. For the following Titles:

'Client 1, Jan 07'
'Client 2, Jan 07'
'Client 3, Jan 07'
'Client 4, Jan 07',

Would you be able to change 'Jan 07' to Jan 08' on all of the above whilst keeping the variable client name, in a single batch process?

View 3 Replies View Related

Copying Information To Multiple Cells And Updating Lists

Apr 29, 2009

ive had to retype this so please bear with me. ive utilised the resources of this site before but ive come to the time where i need to ask a question of my own.

now i will refer to my attached document as what im trying to achieve.

my project is to create membership cards for our social club at work, out of a list of people we have on our manifest.

If you refer to column A, this is where i will dump the manifest of members as time progresses (keeping in mind that more names will be added to this list as it goes).

What i am hoping to achieve, is to start at Cell A2 (highlighted in yellow). For the example the membership name is "a". i want to hit the macro button and the following will occur.

1. data "a" from Cell A2 will be copied to B2 (highlighted in green) and G6 (highlighted in blue). This moves the name from being on the unregistered list over to a membership card and to the registered list, which allows me to cross check that im not doubling up on names with new applicants and current members.

2. once this occurs, i was cell A2 to delete and cell A3 to be moved up, so now, cell A3's data "b" (highlighted in orange) will be moved to A2.

3. a similar process as point 1 will now occur, where A2 will be moved to the highest empty cell in Column B, which would be B3 now. It will also copy to G18 into the 2nd membership card.

4. this process occurs until column A is empty in A2.

5. i wish to really only have an A4 page worth of membership cards before i print, so i wish to be able to "reset" the membership card boxes, so that instead of the membership cards continuing all the way down the worksheet, it will do say 12, then print, then start back in the 1st box. Ideally this is a loop so that it occurs until there are no more names in Column A.

This is a huge feet for me as an idea because ive never gone beyond using basic recorded macros, however im the type who just HAS to learn how to do stuff, so i will lap up any information or assistance i can recieve from anyone here.

View 11 Replies View Related

Updating Master Sheet With Data From Multiple Sheets

Oct 10, 2013

I have multiple data sheets with tables and I want to create a master sheet table that automaticly will update when now rows/data is added in to the sheets in any of the data sheets.

Master sheet will look like this (the first 3 letters is the data sheet name), this is just the first column there a a lot more columns to be added

AAB08
AAB09
AAB10
AAB11
AAB12

[Code] .......

So when let's say in sheet AAB I add another row AAD13 I want the master sheet to update automaticly so it looks like this

AAB08
AAB09
AAB10
AAB11
AAB12

[Code] ......

Is this possible?

View 1 Replies View Related

Updating Values In Variable Ranges Based On Repeating Patterns In A Column

Jul 6, 2006

I have a list of two columns. Here’s an example. The left most column provides the row number.

_ A B
1 1 0
2 2 1
3 2 1
4 3 2
5 4 2.5
6 5 4
7 1 0
8 1 0
9 2 2

Whenever there are two repeating numbers in column one, I want to reduce certain numbers in column 2 by a certain amount. The amount is determined by half the difference between the number in column B corresponding to the second repeated number and the number in column B corresponding to the row after the second repeating number. The range of numbers that are to be reduced begins with the row after the second repeating number and ends with the last row before number one appears in column A. The values in column A are integers, always starting with one. For example, 1, 2, 3, 4, 1, 2, 3, 1, 2, 3, 4, 5.

For the above example, after finding the repeating number two’s at A2 and A3, it would reduce B4 through B6 by half the difference between B3 and B4 (1/2). The values for B4 through B6 would be updated in column B. The same for the next repeated numbers, which is one at A7 and A8. Half the difference between B8 and B9 is 1.

Here’s what the updated list would look like:

1 1 0
2 2 1
3 2 1
4 3 1.5
5 4 2
6 5 3.5
7 1 0
8 1 0
9 2 1

View 9 Replies View Related

Lookup Multiple Values In A Single Cell (separated By Commas) And Then Return The Values To A Single Cell (also Comma Separated)

Jan 7, 2009

If I have, in one cell (call it D1):

EH,DR,HU

and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E

I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...

eg...

F,G,H

View 9 Replies View Related

How To Multiple Values From One Cell To Multiple

Mar 7, 2014

I have cells with multiple values in A1. [Alt-enter]. What's the easiest way to get these values to split to B2, C2, D2, etc?

Number of characters range, number of "Alt-enters" range.

Example Data:

653576051617433
653376051616332
653276051617014
653176051617654
653176051617111

View 9 Replies View Related

Excel 2010 :: Display Cell Ranges From Multiple Locations Based On 2 Cell Values?

Jun 4, 2013

I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...

I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.

P.S. I have excel 2010 and windows 7

View 1 Replies View Related

Format Multiple Cell Values Displayed In Single Cell?

May 24, 2012

I have the following data on a spreadsheet created by a formula:

A1: 1.1234
A2. 2.234
A3: 3.34

I have the data formatted to only have two decimal places so it looks like this:

A1: 1.12
A2: 2.23
A3: 3.34

I'm using the following formula in cell B1 to display the values of those cells in a single cell in order A1,A2,A3:

=A1 & "," & A2 & "," & A3

However when the values of A1, A2 and A3 appear in the in cell B1 they appear as: 1.1234,2.234,3.34

Is there a way I can edit the formula or format something so the values in B1 appear as with only two decimal places? i.e 1.12,2.23,3.34

View 3 Replies View Related

Lookup Value In A Cell With Multiple Values And Return Value From Different Cell

Nov 19, 2013

At work I have a spread sheet that I used to track material shortages by part number. So in column A of the spread sheet there is a list of part numbers that have shortages, column E contains a list of all sales orders that are affected by the shortage separated by a comma. I am trying to setup a query sheet where I input a sales order and get back a list of parts that are short for that sales order(basically reversing the original list to be by sales order instead of part number). The number of values in column E varies, sometimes a cell will have 1 value, sometimes 20+ and anywhere in between.

Example Sheet:
A
B
C
D
E

123

012

234

789, 567

465

789

890

012

I'm already got a INDEX/MATCH that would show both shortages for sales order 012. But I can not figure out how to get the shortages for 789 or 567.

View 1 Replies View Related

Match Multiple Values With Multiple Values From Another Table - Return Single Value

May 12, 2014

I am trying to look & match key values from 2 areas of one table with two areas of another table; in turn, it'd return one value based on the lookup table...

Attached worksheet : Test booklet.xlsx‎

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved