Need to display time in total minutes but with a space after every 3 digits.
For instance, I can display 0.833333 as total minutes by using the custom number format [m] which displays 1200. But I need it to display as 1 200. I know with a standard number, I could use # ##0 but I don't know how to get both of these custom attributes to work simultaneously.
I have a formula which will calculate the number of hours and minutes between two military times. I would like it to calculate the total number of minutes instead of hours and minutes. I have uploaded a small example of what i have so far.
View 3 Replies View RelatedI have the following time ranges that need to be converted into total minutes. Examples (from easiest to most difficult)...
The items below are in column A (each range is the content of just one cell):
00:00-13:00
06:30-13:15
13:30-13:15 (this spans two days, so it's actually 23H and 45M)
23:30-03:00 & 16:00-22:10 (only the first time range matters; the second can be omitted)
So for 00:00-13:00, we have 13H and 0M = 13 * 60 = 780. And for 23:30-03:00, we have 3H and 30M = 3.5 * 60 = 210. But how do I automate this process with the text entries above (and hundreds more that are imported in this format).
I have a column of tasks that take a certain amount of time to complete formated as h:mm:ss. I want to total the column and convert the total to days, hours and minutes. Is that posible and if so how do I configure a formula and format the cell? example:
task 1 54:00:00
task 2 20:45:00
task 3 27:05:20
task 4 51:10:45
total 153:01:05
How many days, hours and minutes?
How can I work out the following in hours an minutes: -
Cell A1 = 12th May 2007 20:00
Cell B1 - 14th May 2007 14:30
or should I put the dates and times in seperate cells? I would like the answer to show 42 hours 30 minutes
In my worksheet there is a column with values of either 3 or 4 numbers. If the value only has 3 numbers I would like to add a space before the first number, to ensure the proper line-up when saving the sheet as a text file. How can I do this (conditional formatting or macro??)
View 5 Replies View RelatedI have a UPC list. Some are more than 12 digits, and some with less than 12 digits. I need to make sure there are 12 digits in each UPC. I know how to count using LEN, strip leading zeros of those UPCs that are >12 digits using RIGHT.
What I need now is any number with less than 12 digits, such as 000123, add a 4 to the beginning (4000123) and fill in '0's in between the 4 and the short UPC number to make 12 digits, 400000000123. They vary from 1 to 13 digits.
I would like a formula to count the number of unique digits from a range of cells.
For example...
Range A1:F1...
11 23 36 47 48 49 = 8
Range A2:F2...
1 11 12 21 30 31 = 4 etc
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View 4 Replies View RelatedI need to calculate the total cost of outbound calls based on the total duration of outbound calls multiplied by cost per minute. For example, in a given month, the total duration of outbound calls is 261:16:34 being 216 hours, 16 minutes and 34 seconds. I have this figure in cell A1 with the format [h]:mm:ss. I then convert this to minutes in cell B1 by saying B1=A1, but having the format [m], which gives me 15676. In cell C1, I have the cost per minte value of £0.026. But when I apply the formula D1=B1*C1, I get £0.283, when 15676*£0.026 should in fact be £407.58.
View 2 Replies View RelatedI am using a formula such as =Text(A5-E5,"H:MM) to get the difference in clock-in time and clock-out time on a daily basis (Monday-Saturday). I want to add the results as a total for the week. I am not sure what formula to use to get that result. I prefer not to use decimals unless I have to. Also, the above formula does not work when the time goes past 12 midnight.
Having trouble adding a column of minutes and converting the total into hours and minutes. Say Cell A1 through Cell A18 each have 12 minutes in each cell. I want cell A19 to tell me how many hours and minutes of total time that have elapsed. I have tried hh:mm, [hh]:mm, but nothing works.
View 9 Replies View RelatedFormula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies View RelatedI work in a finance department and we have MANY numbers consisting of 7 digits. Is there a way to enter in the entire number, but only display the first 4 digits?
View 9 Replies View RelatedI have listed a total amount of timings for a study that I have totalled giving me a figure of 34.76 which is under an hour.
how do i convert to min and seconds - is there a formula?
i have 2 coulmns in a listbox. The columns cant display more than 11 digits. So basically it would look like this 1.23456789E+12. I even tried playing with the Columnwidth but that didnt work.
View 2 Replies View RelatedI need a way to display all 8 digit numbers that have the digits 1-8 in them. (ie. 12345678 but NOT 12345679 OR 12345677) Also If I could somehow divide by 13 then check for whole numbers
View 14 Replies View RelatedI am trying to display the results that i get in excel sheet in a userform using textboxes; I need to round off the digits in these textboxes so as to display 2 digits after decimal point! I would like to have the code to solve this problem!
View 4 Replies View RelatedI have a spreadsheet and a macro that creates a new sheet and enters some data into the sheet. The user gets to make some changes to the created sheet and then prints it out. I was wandering if there was any way to have a message coming up every 10 minutes remindnig the user about the new sheet untill it was printed out and then the warnings would stop. Could anyone sugest a good way to do that?
View 7 Replies View RelatedI have made a form with a calender control, a keypad for hours and minutes. I have no problem getting the date from the active cell into a label caption and changing it by the calender, but I am having trouble reading just the hour and minutes into separate label captions from the active cell and changing them via the keypad and updating the active cell at the same time with a new date and time.
View 3 Replies View RelatedI have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies View RelatedI have an issue with identifying start-stop times for special school bell schedule. Cell B2 is contains start time (7:50 AM) and D1 is the establish variable for class length (in this case 45 minutes). Passing time is constant (5 minutes), but needs to be added to the day schedule with the start of each class. I attempted to convert these value to minutes with no luck, same goes to formatting cells.
Hour
Start
End
Class Length
Passing Time
[Code]...
I have a cell formatted as general that has need to be able to to take 21:56 and convert that to minutes. That is 21 hours 56 minutes to 1316 minutes. Then I need to add those minutes to a time to come up with like 19:14 + 1316 minutes = sometime the next day.
View 9 Replies View RelatedI have been racking my brains about this for the last hour without any joy. If I have a time value of say 01:12:00 in cell A1 (which is the difference between two other time values), but I want it displayed in minutes, so it displays 72 or 72:00 instead of 01:12:00 (which is 1 hour 12 minutes),
View 9 Replies View RelatedIs there a formua that can roundup the time duration to the nearest fifteen minutes?
Eg, if the time duration is 2hr 17 min, can it be rounded to 2hr 15 min?
If is 2hr 31 min, to be rounded to 2hr 30 min.
i am looking to do a table which shows time started, time finished and then a total for hours that day, then that week.
Start 08:00
End 16:00
Total 8 hrs.
How can I get the total to display as 8 hrs? not 08:00? When I change the format to "number" it shows 0.33?
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies View RelatedWhen I am converting a time from Hours/Minutes to Hours/Tenths, Excel is not converting it consitantely. EXAMPLE: 1:15 = 1.25. When I format the cell to present only one place past the decimal point, sometimes the cell will round up to 1.3, and other times it will round down to 1.2. What am I missing?
View 3 Replies View RelatedI have applied the excel suggestion to no success. Currently I take the hour and minutes and then manually use a time conversion chart to add. 3:00 PM to 4:10 PM will reflect 1:10 but adding time should convert to 1:17 (in 100ths)
View 1 Replies View RelatedIn one of the spreadsheets there is a need to have a 'action at' field.
This is the next five minute time slot between 5 and 10 minutes in the future (eg 10.51 -> 11.00 , 1.56 ->2.05 etc)