To Have Same Sorting, Same Order, Each Time
Mar 1, 2007
I have three columns of data I need to continually order in the same order. DIMM High, DIMM Low, CPU High, CPU Low, Freq High. The second column has the dates these were run and the column after that has the time run. The first column must list the tests in the same order, even if one tests was run twice, so say CPU High was run twice before the other tests were run, I still need the test column to list the other four test and then run the Dimm High again.
DIMM_High1/22/2007 14:52:55
DIMM_Low 1/22/2007 15:54:12
CPU_High 1/22/2007 16:36:43
CPU_High 1/22/2007 16:37:00
CPU_Low 1/22/2007 18:05:48
CPU_Low 1/22/2007 23:05:48
FREQ_High 1/22/2007 22:55:51
FREQ_High 1/22/2007 16:55:51
The problem is, Excel wants to list them by their name first. How can I get the list to appear as below:
DIMM_High1/22/2007 14:52:55
DIMM_Low 1/22/2007 15:54:12
CPU_High 1/22/2007 16:36:43
CPU_Low 1/22/2007 18:05:48
FREQ_High 1/22/2007 16:55:51
CPU_High 1/22/2007 16:37:00
CPU_Low 1/22/2007 18:15:48
FREQ_High 1/22/2007 16:59:51
View 8 Replies
ADVERTISEMENT
Jul 19, 2013
I have a column that has something like:
7
5
3
6
4
9
3
11
(continues)
How do I make it to be the order of bigger number to smaller number?
I tried Data > sort Z-A, but then some of the numbers disappear and become "--"
View 2 Replies
View Related
Feb 21, 2014
So i have a column full of first and surnames (both names in one cell). Is there a fast way to arrange them in alphabetical order? (surnames)
View 2 Replies
View Related
Oct 9, 2009
I am wanting to display cricket bowling figures - the best figures for each player as the season progresses.
I track runs and wickets each week like this:
Runs 23 25 18 35
Wickets 1 3 2 3
Sorry can't post attachments. Top row is A1:E1. Bottom row is A2:B2.
This shows the bowling figures for 4 weeks.
I need to sort the Wickets range and find the highest number. When there are two or more cells returned with the same value (as there are here (3)), we then need to find the lowest value in the runs range for these two matches.
The result needs to be displayed as follows:
(number of wickets hyphen number of runs)
In this example 3 wickets was found twice. 25 runs were conceded one week and 35 runs another. So the result needs to be: 3-25
When there is only one cell with the highest number of wickets, the number of runs for that week is chosen without any need to check anything else.
e.g.
Runs 23 34 20
Wickets 1 3 2
would return: 3-34
View 9 Replies
View Related
Nov 24, 2008
I have a spreadsheet saved with one worksheet with all the results on it and 130 worksheets with calculations on them, each with its' own named tab along the bar at the bottom of the page. What I'd like to know is if it is possible to sort the tabs into alphabetical order so I don't have to roam through up to 130 to find the tab (and it's corresponding worksheet) I'm looking for.
View 2 Replies
View Related
Feb 7, 2011
I have excel 2007, I have a spread sheet with approx 80 worksheets. The document grew over the year of 2010 and is not in alphabetical order. I am starting this new year wanting to have the tabs in alphabetical order. I looked in the DATA sort option...but looks like its is worksheet specific. How to make the tabs sort in alphabetical order...
View 5 Replies
View Related
Feb 28, 2012
I need to sort a horizontal bar graph, with the Y Axis in alphabetical order.
View 6 Replies
View Related
Dec 29, 2012
I am trying to sort multiple values in ascending order (example attached) however I can't get this to work. Tried looking at a few different forums and although there is plenty of sorting questions out there they all tend to be relating to dates not different values (i.e text and numbers).
View 14 Replies
View Related
Oct 25, 2011
Find the sorting method of dates in excel 2010. I have dates in one column and i want to sort it, but I am not able to sort in ascending or descending order.
View 1 Replies
View Related
Feb 23, 2012
The order of entries in my chart legend make no sense to me. Why is it not matching the order of the source data?
View 1 Replies
View Related
Jul 1, 2013
I wanna sort these numbers in descending order and related to each others in excel 2010.
H
G
F
E
D
C
B
A
1383.99
1533.954
831.197
1533.954
1533.954
1383.99
700
1533.954
1
[Code] .........
About descending and related to each others, I mean for example : #700 in column A,B,C,D,E,F,G,H places in the same row and the same happen to #1533.954 and others. About the numbers that are The One ( like 549.894), I need to put them in its column and a new row with empty cells in its other columns. In the end i want a table like this:
H
G
F
E
D
C
B
A
1533.954
1533.954
1533.954
[Code] .........
View 5 Replies
View Related
Aug 27, 2013
How to rearrange slices of pie chart in descending order without sorting the data?
View 1 Replies
View Related
Oct 18, 2007
I have a page of planetary symbols (astrology) in 3 columns (A,B,C ) in date order, that I'd like to copy across on the same line (date) ,to a designated column on the same sheet, in order of the ColD symbol it won't show here properly as there's no astro font, just tried it.
eg
A B C D E F
date Mercury 180 Venus Mercury180Venus
" Venus 60 Mars Venus 60 Mars
" Jupiter 30 Venus Jupiter 30 Venus
here, we have Venus copied to same line in ColE
Mars " " " ColF
how to sort the columns, Cols B,C & D themselves could be resorted instead into the order of the ColD symbol-- so I'd have colA, date-- the B,C,D sorted by D, into about 8 Cols to the right
View 9 Replies
View Related
Apr 30, 2013
I have a pivot table and and struggling to group these by month as well as to sort thee in escending order.
Pivot Table ABC3Row LabelsSum of DebitSum of Credit
413/02/201334367.1822844.19513/03/201326475.492219.66613/08/201230307.613541.2713/09/2012
18898.0318065.4813/10/2012 7210.52913/11/201241969.041767.821013/12/201232844.7724041.26
View 3 Replies
View Related
Apr 13, 2009
=C4+(0.3*(C5-((C2-1)*C3)))
Where C4 is 'Qualifying time', C5 is 'Starting fuel', C2 is 'Lap number' and C3 is 'Fuel consumption'. I also plan to make the 0.3 a changeable variable.
I'm not fussed as to whether or not this is a realistic function that would work in a real race, it's only hypothetical. However I would like to have a function that would give me the over all race time at any given lap, not just the lap time for it.
View 7 Replies
View Related
Jul 23, 2013
I am trying to sort a column so it'd be like a schedule the earliest time on top and latest on the bottom. I understand it is a form of custom listing but I am not quite sure what is the way to enter that list entry...attached is my excel spreadsheet I am currently working on.
View 7 Replies
View Related
Dec 1, 2006
I am trying to find a way to sort this info by column D but within the Groups shown. So, I want to sort rows 5 to 13, then rows 15 to 19 and then rows 21 to 29.
However I need to a macro to do this because the figures are updated weekly and the order will change. Furthermore, there could be new depts added when the figures are updated, so the row numbers may also change....
View 9 Replies
View Related
Apr 18, 2013
I'm creating a Purchase Order Form that will reduce time spent adding in contact details.What I'm looking to achieve is a form that will be printed with a few formulas allowing sections of the form to be filled out automatically once a singular company name (chosen from a drop-down list I created, currently with a 'Combo box ActiveX') then the rest of the form is filled out accordingly.
At the moment it's a bit of a mess, not too sure where I'm meant to put the ranges.There are currently 2 sheets - Sheet 1 with the form, Sheet 2 with all contact information.
View 1 Replies
View Related
Jul 29, 2013
I am trying to do an analysis on 4 spreadsheets, each with approximately 4500 cells.
Each vertical cell represents a patient visit to a hospital. There is a timestamp, then a bunch of other metrics that I will be comparing. I want to sort the 4500 visits by time and date. This is how the timestamp of their arrival shows up:
Jul 02 2012 10:25 AM
^A single cell contains both the date and time next to each other.
I want to first separate all visits by time of day. I want to make one group that checked in between 10a and 10p and another for 10p-10a. Then I want to sort both groups in chronological order by date (i.e. starting with 2011 and ending in May 2013).
For one, I'm thrown off because the time and date are next to each other in the same cell.
View 4 Replies
View Related
Apr 11, 2007
I'm using the excel built in function to sort columns with my macro. However since my columns have 64,000 entries it takes a while for the computer to sort it.
View 14 Replies
View Related
Nov 29, 2008
I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:
I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?
Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...
Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).
Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.
View 9 Replies
View Related
Mar 1, 2008
I need a way to re-order an excel worksheets columns based on another worksheet.
Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.
How can i reorder the columns without physically having to cut and paste the columns to match?
I have attached a sample spreadsheet.
You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.
View 3 Replies
View Related
Dec 19, 2008
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies
View Related
Feb 7, 2014
the vendor has a 21 hr working window; start from 7am and goes until 4am; Mon to Fri.
Here is a scenario:
- i request for a product information from a vendor on 3-Feb-14 8:00am (Monday)
- he replies with all of the product info on 6-Feb-14 12:00pm (Thursday)
can you find the time in above scenario consideration the working window?
Here is another scenario:
- i request for a product information from a vendor on 6-Feb-14 8:00am (Thursday)
- he replies with all of the product info on 11-Feb-14 12:00pm (Tuesday)
- Sat & Sun are days off but keep in mind that my Friday shift ends on sat at 4am so the networdays formula wont work.
View 2 Replies
View Related
Mar 3, 2009
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View 4 Replies
View Related
Mar 28, 2014
I am looking for a function to convert time given by my computer (Local time) in EST (Eastern Standard Time). We are several users of a same file (with timestamp macros) and all time need to be aligned to one time zone (EST), even if all users are working in different time zone (EST, CST and IST).
View 1 Replies
View Related
Mar 22, 2012
Consider this code:
'light eligibility
Dim facb As String
Dim sunset As Variant
[color=green]' check if facility has lights[color]
facb = WorksheetFunction.VLookup(RID, ds, 10, False) 'find facility code
If WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Then 'facility has lights
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False) 'lookup the sunset time based on the record's date
[Code] ......
This code checks the need for lights at a facility.
It first checks to see if the facility even has lights by cross-referencing a value in the record with a facilities database.
If it has lights, it then checks to see if they are needed. If the rental goes past the sunset time, then it needs lights. Sunset is determined by cross-referencing the date value in sheet1! A9, with the sunset database.
If it needs lights, variable lghtson is calculated equal to "sunset"-30 minutes.
As I step through this code:
WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Facility has lights.
Check to see if lights are needed.
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False)
sunset=0.879166666666667 which is 9:06PM. This is a proper value from the lookup.
If rental_end.value > sunset Then
rental_end (value from textbox) = "9:30 pm" , sunset=0.879166666666667. This is true, and Excel accepts it as true ...
lghtson = sunset - 0.5
0.379166666666667 = 0.879166666666667 - 0.5 (9:06 AM)
This is not the value I was looking for. I was looking for 8:34PM (0.856944444444444)
View 2 Replies
View Related
May 3, 2013
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
View 9 Replies
View Related
Mar 30, 2009
i am looking to do a table which shows time started, time finished and then a total for hours that day, then that week.
Start 08:00
End 16:00
Total 8 hrs.
How can I get the total to display as 8 hrs? not 08:00? When I change the format to "number" it shows 0.33?
View 9 Replies
View Related
May 5, 2006
I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
View 9 Replies
View Related
