Copy Columns From One Worksheet Into Another Worksheet?
Feb 3, 2014
I have a worksheet with data in columns AW to columns QZ. I want to be able to copy a range of columns into another worksheet. The Columns AW to QZ have the same headings repeated every 10 columns. e.g. English, Maths, Science, Art & Design, Humanities, PSHE, History, ICT, RE and Attendance. Each block represents a different time period.
I want to be able to copy all the columns headed one subject (e.g. English) into another workbook. I used the following code to open the worksheet and paste the data into it, but there are so many columns for the 10 subjects that the code is too big to run so I need to shorten it and i don't know how to.
Sheets("On Roll Data & Levels").Select
Range("AF2:AF99").Select 'KS2 English column
Application.CutCopyMode = False
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
I have a workbook with 20 worksheets. I want to start from any worksheet and run a macro that will copy some columns (A:E) from another worksheet called TABLE1 into columns I:M of worksheet I was originally in. I don't want to specify which worksheet I am in when I start as they are all called different names and I want the generic macro to run from any sheet. I simply want the macro to register the worksheet I am in when I run the macro as the reference sheet, and copy columns/data from TABLE1 into the correct columns of the worksheet.
I would then select the next worksheet - run the macro again - and it would copy the same columns from TABLE1 into the worksheet I am in. I know the following is not right, but what I have so far is =
this successfully goes to TABLE1 sheet and copies columns A:E but does not go back to the sheet I was originally in - I don't know how to code so it knows what the starting sheet was - it tends to either fail or copy the columns back into TABLE1 sheet.
look for a certain value in worksheet A and copy that row of data to Worksheet B.
However, it seems to be only copying the row in worksheet A and pasting it. Is there something that a noob VBA scripter has missed out?
PHP Private Sub GetInfo_Click() Dim r As Long, LastRow As Long, Status As Integer Dim Message As String, Title As String, Default As String, MyValue As String Application.ScreenUpdating = False
MyValue = Range("A4").Value Workbooks("invoice.xls").Worksheets("A").Activate LastRow = Range("C65536").End(xlUp).Row For r = LastRow To 1 Step -1 If Cells(r, 1).Value = MyValue Then Rows(r).EntireRow.Copy Workbooks("invoice.xls").Worksheets("B").Activate Rows("8").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Status = 1 Workbooks("invoice.xls").Worksheets("A").Activate Rows(r).EntireRow.Delete
Exit For End If Next r Application.ScreenUpdating = True
I want to copy 4 columns and one cell to different sheet. I have 'Main' sheet and 'Report' , 'Report(1), 'Report(2), 'Report(3)' and so on. In this 'Report', I'd like to copy column A,E,F, and J and paste to column B, C, D, and E in the 'Main' sheet. I also copy Cell C3 in 'Report' sheet and paste in column A. The cell C3 is ID.
[Code] .....
I need to check every 'Report' sheet for copying and put these records into 'Main' sheet.
The first row in 'Report' is 6 The first row in Main is 4
I am converting a xls workbook into a tab delimited text file, but instead of copying the entire workbook, I want to copy the first two columns of the workbook except for the header row.
This is my code which is copying the entire workbook -
Code:
Private Sub SaveAsTabDelimited(ByVal sFileName As String) With ActiveWorkbook .SaveAs FileName:=sFileName, FileFormat:=xlText, CreateBackup:=False End With End Sub
[Code]...
how can I achieve this in my macro. I tried using the range(A2:B100000).Select syntax, but it didn't work.
I’m trying to do is identify duplicates in a LARGE column of numeric data. As a matter of fact, it’s about 112,000 rows which won’t fit on one spreadsheet since a spreadsheet can only handle 65,536 rows. So the caveats are that the information needing scanned for duplicates is all ONE body of data even though it is on 2 spreadsheets so I am not comparing one sheet of information to the other rather all 112,000 lines need checked for duplicates as a whole. Once duplicates are found I would like them to be highlighted in yellow on the original 2 worksheets but then also have the duplicates copied to a new sheet.
Trying to compare data from two spread sheets, if there is similar data in column a, output all data (sheet1 & 2) to the 3rd sheet.
Sheet1 a b c d smith john 888 cicero king larry 123 syracuse
Sheet2 a b c d smith marge 777 liverpool king mike 458 dewitt
Sheet3 a b c d a b c d smith john 888 cicero smith marge 777 liverpool king larry 123 syracuse king mike 458 dewitt
The closest thing I can find to what I'm trying to accomplish is this link here: Compare Worksheets
I'm also would like the ability to change the columns I am comparing. The actual sheets may have more that 4 columns.I can somewhat read the formulas but have a hard time under standing them completely.
I have an order form created in excel with a list of about 1600 products. I have a column set up for the customer to place the ordered amount of each product. What I need now is a way to transfer only the rows that have a value in the "ordered" column to a new sheet. I have seen it before , but don't know how it was accomplished.
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
I have Folder with almost 21 or 22 Excel files depending on the working days in a month,
All I am trying to do is to run a Macro so that Column C and D from Sheet Name "Resource Count" from all Workbooks of Different Names from all the files from that folder to be copied and pasted to a new Workbook one after the other in new workbook.
To clarify, Each workbook in that folder will have a sheet named "Resource Count" and I want to copy Column C and Column D from all the workbooks from the folder and paste one after other in a new work book.
I am trying to modify the macro listed below for the following example. It would work when I have only numerals in the cell but this new query, the cell has both letters and numbers.
I want to compare column "M" from worksheet one to column "B" in worksheet two. If the information matches, then copy the value adjacent from worksheet two column "A" to worksheet one column "L".
Here is the macro that worked for me using a search of only numerals.
figuring out why the data doesn't copy?
Macro:
Sub merge_accession_PS_rad_productivity() Dim rng2 As Range, c2 As Range, cfind As Range Dim x, y With Worksheets("Imaging_Summary") 'N4=Accession on Imaging Summary worksheet
I have written code that allows a user to copy, via a button, a certain sheet any number of times. They can choose to copy that sheet 5 times and then 10 times, etc.
When the sheet tries to be copied for the 17th time, it fails with the following message: "Run-time error '1004': Method 'Copy' of object '_Worksheet' failed"
Here is the code that I have. The second line is the line that is failing.
This always fails on the 17th copy regardless of how many different combinations of copy sheets the user tries. There are several sheets before the sheet that is to be copied and I have deleted several of those to see what happens and it still fails on the 17th copy. I also have 1GB of memory, so I don't believe that memory is an issue.
I've been tackling this data capture/paste issue for a week or so. I found the string below which does provide a good foundation for my challenge. But, my basic level of understanding macros limits my modifications to meet my needs.
[URL] ......
I have 20 worksheets in my master file corresponding to Excel files individual associates will update weekly. After the associates have updated their individual files for the week, I want to capture the data entered and paste values into a master file containing a worksheet for each associate (sharing the same name as the individual associate file). All of these files are housed on team SharePoint sites.
I need a macro to perform several steps after clicking a "Run Update" macro button in the master file: Open individual associate fileIn master file, search for each Initiative listed in column B (starting cell B3) in the individual associate file (in column B starting at cell B11)If Initiative is found in individual associate file, copy adjacent data in columns D:J for the respective rowIn master file, paste values to the corresponding Initiative row for the corresponding week's worth of dataIf Initiative is not found in the individual associate file, move to the next Initiative listed in the master fileRepeat these steps for each individual associate file
Linking would be the easiest way to accomplish this if I wanted to have a multitude of weekly individual files for the associates. However, I'd rather each associate have one file for them to update (basically overwriting their previous week's entries).
I need to ensure the paste values corresponds to the appropriate day of the week. In simpler terms, if the date in the individual associate file in cell D9 reads Oct 1, 2012, the data captured from that row needs to be pasted to the corresponding row/column in the master file that reads the same date.
I'm in the middle of building a code that will look at the value in Sheet: "DATA" column "J", for each row that matches a criteria that I pull from a cell - Sheet: "Test" Cell: "C1".
The number of rows varies. I want to paste columns: "I2, K2:P2, U2:AJ2" when the value in Sheet: "DATA" column "J" matches the cell "C1". I'm using a Command button to click every time I want to generate the filtered data. And I would prefer the code to always copy data starting at Sheet: "Test" Cell: "K2".
I've copied, below, my test code that I have so far which only copies row 2 from the Sheet: "Data", and copies it into Sheet: "Test", starting at K2.
VB:
Private Sub CommandButton2_Click() If Sheets("DATA").Range("J2").Value = Sheets("Test").Cells(1, 3) Then Sheets("DATA").Range("I2,K2:P2,U2:AJ2").Copy Sheets("Test").Cells(2, 11).PasteSpecial Paste:=xlValues, Operation:=xlNone End If End Sub
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
Rep Name is Column J Row 5. I need to find multiple columns based by the header which is row 5, if column range (j5:az5) is "Video - Actual" then copy column to sheet "Data", this needs to be repeated for about 8 more times for different criteria
Rep NameBundle - TargetBundle - ActualVideo - TargetVideo - ActualJoe, Jane 2.06.06.04.0Smith, John 7.010.02.06.0Tucker, Chris 19.039.05.017.0Sandler, Adam 15.011.06.010.0Iglesias, Gabriel 8.03.06.010.5Smith, Will 8.03.06.06.5Powers, Austin 10.025.07.09.0
I have requirement to extact data into a spreadsheet. This data is extracted from CSV file which is huge normally over 7MB. I have found a macro on the internet which I have included with this post.
Sub split() Dim ResultStr As String Dim FileName As String Dim FileNum As Integer Dim Counter As Double 'Ask User for File's Name FileName = InputBox("Please enter the Text File's name, e.g. test.txt") 'Check for no entry If FileName = "" Then End 'Get Next Available File Handle Number FileNum = FreeFile() 'Open Text File For Input Open FileName For Input As #FileNum .................
I have also included reult data that I get after running the macro. I have cut down on data due to attachement restrictions. But usually there are multiple spreadsheets named "Sheet1, Sheet2, Sheet3 and so on". I have numerous requirements. First of all I want to be able to spreate data into columns. For now how I do that is by going to data -> text to columns and then selcting delmited and then selecting comma as my delimiter. Second thing I want to do is is only extract range of data from this output into a new worksheet. I am only interest in the name like for example ALBANY-Serial0/0/0 and data that is in the range of 8:00 AM to 6:00PM. So the new sheet should only have name and for that name data in the range of 8:00AM to 6:00PM for all the sheets "sheet1, sheet2 etc" until all data has been extracted.
I'm a novice Excel 2007 user and appreciate all the help I can get. I have a workbook with monthly worksheets in it. When a certain data Type is selected from a drop down menu in that monthly worksheet than I would like to have it automatically enter specific data (Name, Date, Eval, Type) copied to another worksheet (CC) in the same workbook. I have been manually entering the data so far. Another thing, some of the data will be entered into the Monthly worksheets and some will only be manually entered into the CC worksheet so it would need to accomodate both methods of data entry. Please let me know if I need to clarify. I have attached the workbood, too.
I would like to copy the data from one worksheet to the alternate row in another worksheet as follows. I've attached a file showing the source file and the desired output.
1. Copy column B's data in worksheet "Working" to worksheet "Upload file" Column V. B2's data goes to V1, B3's data goes to V3, B3's data goes to V5, so on and so forth.
2. Copy column H's data in worksheet "Working" to worksheet "Upload file" Column F. H2's data goes to F1, H3's data goes to F3, H3's data goes to F5, so on and so forth.
The number of rows with data in worksheet "Working" varies. It could be 30 lines one time and over 100 lines another time.
Each Worksheet has a unique identifying label - "Requirement Number"
Within each worksheet is free form text data of the following categories:
Requirement: 10358 Title: Customer requirement 1 Text: This describes the requirements for a product for the customer[code].....
The text of the categories may begin in column A or B
What I need is a macro that will search each worksheet for a category, e.g., "Configuration:", copy the row where the keyword "Configuration" is found, and then have that row transposed and pasted to another WorkSheet (e.g., "Extracted Data") cell.
Data extracted from the next Worksheet would begin a new row in "Extracted Data"
Example: Requirement1 Title Text Verification Method-Level ... Requirement2 Title Text Verification Method-Level ... Requirement3 Title Text Verification Method-Level ...
The Requirement# is best extracted from the WorkSheet tab since some of the worksheets are missing this information. I can provide an example spreadsheet, however, I was not able to figure out how do that in this post.
I found a thread similar to this problem:
find and copy row
However, it only finds, copies and pastes for one keyword.
I would like to be able to select several non-sequential rows in a worksheet called "Data" (using a check box or just entering a value in Column A) and then be able to press a Command button to copy the selected rows to another worksheet called "Estimate" at the bottom of a table, and delete the designators in Column A (i.e. deletes the value, or unchecks the boxes) so I can repeat the process again if needed.
I am trying to copy one worksheet using the "move/copy" function that is available when you right click a tab name and want to copy the worksheet in the same workbook
The steps I'm using are:
1. Right click the tab name 2. Select Move or Copy, 3. Select Create a Copy 4. Click OK
Doing all of the above does not work. When the new worksheet opens, all columns are the same width. It seems to be stuck on "autofit column width" setting of 8.5. The original worksheet is several columns wide all with different width settings.
I've also used Copy, Paste Special and selected column widths and that does not work either.
I have a worksheet that utilizes a Worksheet Change Event. I created a macro to copy the sheet and that works fine except for the fact that it doesn't contain the Worksheet Change event.
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click() Dim iRow As Long Dim ws As Worksheet
As I am managing a few projects at once, I would like to create a To Dos List for each project (seperated by different worksheets). To make my life a bit easier, I hope to show all the To Dos which is due on a particular day on a separate worksheet. In other words, I am hoping to write a macro which allows me to copy all the relevant To Dos (of that day) from different worksheets and compiled it into a single list on a new worksheet.
Note:
1) Each row of To Do contains 3 columns, Date, Priority and Descriptions. 2) The To Dos for each project are NOT arrange in sequence by dates. 3) Number of project will increase over time, therefore the number of worksheets will also increase.
