When I click the command button that is supposed to close the userfrom, it closes it but it re-appears again. It closes completely when I click the "Cancel" command button again. It seems to reload the userform when the command button is initially clicked.
Private Sub CommandButton1_Click()
Unload UserForm2
End Sub
I have one userform that loads combobox values upon userform Initialize. Though through a second userform changes can be made to anotherworkbook this workbook is saves any changes. when i close the second userform i need to rerun the 1st userform Initialize event to update the combobox's incase changes have been made.
View 5 Replies View RelatedI've got a formbox that has scrollbars and when the userform starts up the vertical scrollbar is centred, meaning people can't see the top of my form. How do get the scrollbar to be at the top when my form loads?
View 2 Replies View RelatedI have a large userform (Main) that the users enter data into. At the end of the data entry the users click OK and the data is transferred to a spreadsheet. I then ask the users if they want to add another record. If they click "Yes" all is OK. If they click "No" the userform should close and another "switchboard" type userform should open.
My problem is that try as I might I cannot get the (Main) userform to close. It only does so after the switchboard closes.
If I don't load the switchboard, main closes without issue.
I have left out the bulk of the data transferred to the "data" sheet in the code below.
Private Sub Main_OK_Button_Click()
Application.ScreenUpdating = False
Sheets("Data").Visible = True
Sheets("Data"). Range("F2").Value = Surname.Text
Dim result As VbMsgBoxResult
result = MsgBox("Do you wish to enter another record?", vbYesNo + vbInformation, "Continue...")
If result = vbNo Then
Main.URN.SetFocus
Unload Me
Else
what is the proper terminology for the Outlook "Thing" that opens up in excel (shown below)? Is it simply a toolbar? Add-in?
Second question, I have a excel file that automatically loads the outlook "Toolbar" each time it is opened.
The file was made in 2010 and password protected and locked, sent to a worker who edited the appropriate fields and saved, and then they sent the file back to me (2003 Format). Now this file automatically loads the outlook toolbar. I am trying to trouble shoot so what would cause this behavior?
I have a small userform (FormA) with two text boxes, a combobox, a help button, and an "OK" button. When clicked, the help button launches another userform (Form B), containing a text message and a "Close" button.
When I enter data into Form A, then click the Help Button to read what's on Form B, then close Form B, the data I had entered into the text boxes and combo box on Form A are deleted.
I've tried fussing with the modality, but that's not changing anything. I know I could write the text into a variable, then re-display it when Form B is closed, but that seems like a little (very little) extraneous stuff in an already bloated program.
I had made some code changes that didn't end up working as I wanted and this called for PERSONAL to be called and acted on when excel was activated. Now I have deleted the code but still on opening excel is persists in loading PERSONAL. urk. How can I go back to loading Book1 on open?
i have a drop down menu listing all the months (as displayed) and once I pick a month, anyone that has an anniversary OR birthday during that month loads into the columns to the right.
I have tried various ways of doing it but for some reason It just wont pull the info right. The previous posts have shown me scripts for Vlookups and a variety of other things. But the end result was not exact.
I have the following code which loads the data into the pivot table.
View 2 Replies View RelatedI've recently purchased an add-in for Excel 2010 called Image Assistant. It allows you to insert loads of images at once and automatically puts them in the cells for you, which is what I need to create quotes for my business. It was painstaking to go through resizing each picture individually so I thought I'd give this a go...
The demo of the program worked fine, except it restricted you to one picture at a time and I have thousands to go through. It resized the picture great and put it in the cell as I expected.
So I purchased the full product. There didn't seem to be an option to just put a license key into the demo version to make it full, and I was sent a link to download the full version, so I did.
When in Excel, I click the icon in the add-ins window and Excel grinds to a halt. It stops responding instantly and then won't do anything until I force close it, at which point it pops up with "Automation Error" and then closes the program.
I've checked DEP settings, trust center settings, add-in settings. I've tried 'repairing' Microsoft Office in case it was an issue with Excel itself but that didn't work. I've uninstalled and reinstalled the add-in several times and it still freezes every time I open it.
Problem signature:
Problem Event Name:AppHangB1
Application Name:EXCEL.EXE
Application Version:14.0.7109.5000
Application Timestamp:522a4031
Hang Signature:31f9
[Code] ............
I have a combobox with populated values from a named range. I need the first value to be always selected when the form is opened - is there a way to do this
View 7 Replies View RelatedMy manager wants me to create a userform that will populate values from access database . I have done that and now he wants it to run always for the whole day everyday and the values should get updated automatically in the userform. There should be a timer event set that will run the userform automatically after few seconds.
View 3 Replies View RelatedI have a userform that pops up upon opening a file. The user form has
5 text boxes names Zero, Two, Four, Seven and Nine. I would like each of these text boxes to automatically populate with the values last used. The values last used are stored in Worksheet "Index Settings" in Cells "C3:C7".
I have table in excel sheet and i want Create an Excel User Form display automatically to this table, how?
View 3 Replies View RelatedIs is possible to automatically place a toggle button on a user form by entering data in a cell?
In otherwords, if I type a number in cell A1, can that number be automatically put on the toggle button and placed on active userform?
I have some Worksheet_SelectionChange code that automatically calls a Userform when a cell is selected.
What I want to do is retrieve the data from the cell where the Userform is called from and enter it into a textbox on the Userform.
There are 3 other columns to the right of the cell that is selected.
If there is data populated there, I want this to be copied to the appropriate textboxes on the Userform too.
I have created an Excel spreadsheet that collects info from a userform; we are using this as a issue log.
However, at the same time, upon completion of the log, the engineer then needs to fill out the essentially the same information in a Word form for sending off to the customer. I was thinking that perhaps this could be done by using a mail merge but from past experience this generally isn't very user friendly or quick.
Is it possible to automate this somehow using VBA such that when Enter is clicked on the form, not only does it fill in the next available line in the log spreadsheet but it also opens Word and populates the required fields with this same info?
I have the following code in a simple userform containing only a label:
Private Declare Sub Sleep Lib "kernel32" (ByVal dwMilliseconds As Long)
Private Sub UserForm_Activate()
DoEvents
Sleep 4000
Unload Me
End Sub
When I invoke this as a single macro in a blank workbook and immediately change focus by pressing ALT+TAB to enter NotePad the userform is shown and exits normally after 4 seconds.
However, when I issue this code from within a larger macro, and hit ALT+TAB to Notepad, the excel application hangs on the displayed userform until I click back into Excel.
If required, I can happily send you the code as an attachment.
I have put together a booking spreadsheet which uses a UserForm. see attached worksheet. When you start the UserForm and select a name, date, number of nights, and then 'Add', the data is added to the worksheet.
1. My first problems is that when I select the 'Cancel' button on the Userform, I would like the spreadsheet to automatically save under C:My Documents. And also save the file as 'Marketing_DDMMYYYY.xls' as todays date.
2. My second problem is that the 'Leaving Data' column sometimes shows the leaving date in American format (MM/DD/YYYY), and sometimes English format (DD/MM/YYYY).
How can I make this always use English format?
I want to do is use a userform to automatically create a graph from the data that is shown in the worksheet. The data in the work sheet will grow and shrink all the time. Am i right in thinking I am meant to create a dynamic range? I know how to do it but am not too sure what I am meant to be naming. And secondly I am not too sure how I set up the button to produce the graph.
View 4 Replies View RelatedI'm working on a workbook to track staffing patterns. I have two userforms included in my workbook. The first userform (userForm2) initiates upon opening the workbook. It's intended to allow the user to enter a date range and an office location for the report. The second userform (userform1) initiates when a command button (Weekly Summary) is clicked. I've linked texts boxes in userForm2 to cells in a hidden worksheet; this is where I'm holding the dates and office location until userform1 is initiated. I also have labels in userform1 linked to the same cells in the hidden worksheet so that when userform1 is initiated the office and date range appear at the top of userform1.
Here's the problem, when I click command button "Weekly Summary" the office location shows up perfectly however, the labels I have linked to cells in the hidden worksheet that contain dates do not update (i.e. they show the dates that were previously in those specific cells. I have to close userform1 and re-open it to get the dates to update.
I need the user to be able to choose a date range and office location when they enter the workbook. Then, I need userform1 to show the date range and office location (without having to open it, close it and re-open it) that the user chose on opening the workbook.
I have options buttons in a userform, first is "$" the other is "€"
When somebody chooses one of them, it writes the choice to a cell in the data sheet. But when clicked on the next userform I want some of the texts automatically change the currency depending on the choice made in the previous userform.
The formula below was is example
=""&Data!$A$2&" / m³"
=""&Data!$A$2&" / kWh"
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click()
unloadme
End Sub
Private Sub CommandButtonOK_Click()
With Workbooks("RETS results version 2.xlsm")
[Code] ......
This is weird - if you delete a sheet that contained a control then
a. showing a modeless userform resluts in a userofrm that goes invisible at subroutine End
b. public variables lose their value
These things do not happen if the sheet did not contain a control. Attached is an example file - put the inputfile.xls in your default file location (or add a path in the code) then open the ProblemDemo.xls and run the main macro to see it fal - isthis another Excelbug I've found?
I have several non-modal userforms in my App, some of them have date-fields that require manual entry typing of dd/mm/yy etc (No single userform has more than one date-box in it, this I think may be pivotally useful)
Now the Userform 'Calendar' that is built on the class of the same (cCalendar) name, has the write value line 'ActiveCell.value = theCal.value'
I'm looking to change this to refer to the correct userform.Textbox value, depending on which form is open.
I would imagine I could simply have a global string, whose value is set (or re-set) whenever a Userform is initialized (some sort of 'ActiveUF.value = Me.Name), where I get lost is referring to the components by name, so as to have a case statement by where I go:
Code:
Private Sub theCal_AfterUpdate()
Select Case ActiveUF
Case "AddForm"
application.vbe.components("AddForm").controls("AddFormDatePicker").value = theCal.value
Case "EditForm"
'.... etc
end select
end sub
better way of doing this (instead of passing around the userform name as a variable) - or proper syntax for referring to controls outside of the 'active' userform (but an open userform nonetheless)?
Every time I have to do this particular thing with userforms, I completely forget how, and the object browser always leads me on an infinite loop of Application.vbe.activevbproject.vbcomponents.vbe.active....
PS - there may be one slight complication to the process - one of the forms, has a 2-tab page in it, each page having similar (but named differently) fields. So I may need to be able to throw in 'Activepage' or whatnot
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
I'm trying to do: Let's say I have a simple userform with labels as follows:
(Label1) John's birthday: (Label2) 12.10.1974
(Label3) Mary's birthday: (Label4) 15.03.1978
(Button1) Change Birthdays
Let's say want to change the birthdays I see, so I press the button and enter the new values through another userform with inputboxes.
How do I make that change permanent, so that next time I start the macro in the labels 2 and 4 I have the last entered values for the birthdays???
What I would like to do is to be able to open a second workbook from a user form, preform some work on it then save and come back to the same place in the original user form.
So in steps:
1 : user clicks command button to open user form
2: user then clicks on command button on userform that opens 2nd workbook via a yes / no message box, but closes userform on 1st workbook (would be ideal if this could stay open, but hidden)
3: user then does work on 2nd workbook,
4: userform on 2nd workbook saves then activates the 1st workbook and reopens the userform
This is where no matter what I try I cant get the command button on the 1st userform to be clicked automatically so the yes / no message box appears.
This is part of the code in the 2nd sheet commandbutton that saves / closes / opens
Code:
Unload Me
ActiveWorkbook.save
Windows("ABC.xlsm").Activate
Sheets("Request Sheet").Activate
Call Sheets("Request Sheet").ForceClickOnBouttonXYZ
Call UserForm1.CommandButton6_Click 'this is where I cant get it to work!!
Windows("xyz.xlsm").Close
ABC is the 1st workbook
xyz is the 2nd workbook
This is the code on the 1st workbook I use to call on the 2nd workbook
Code:
Public Sub ForceClickOnBouttonXYZ() Call CommandButton1_Click End Sub
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
When I run the userform initialize procedure to reset the values in text boxes and the like instead of resetting like it should, now it closes the userform completely and then won't allow me to show it again, what could be the problem?
Private Sub UserForm_Initialize()
Me.MultiPage1.Value = 0
TextBox3.Value = ActiveWorkbook. Sheets("Sales Invoice"). Range("G15").Value
Dim hWndForm As Long
Dim hMenu As Long
hWndForm = FindWindow("ThunderDFrame", Me.Caption) 'XL2000
hMenu = GetSystemMenu(hWndForm, 0)
DeleteMenu hMenu, SC_CLOSE, 0&
End Sub
The Dim stuff down is to gray out the x button, there are also some module level declarations to go with that...
Private Declare Function FindWindow Lib "user32" Alias "FindWindowA" (ByVal lpClassName As String, ByVal lpWindowName As String) As Long
Private Declare Function GetSystemMenu Lib "user32" (ByVal hWnd As Long, ByVal bRevert As Long) As Long
Private Declare Function DeleteMenu Lib "user32" (ByVal hMenu As Long, ByVal nPosition As Long, ByVal wFlags As Long) As Long
Private Const SC_CLOSE As Long = &HF060
the userform shows when the workbook opens and is then hidden when the user has finished entering values, then when the user goes through the process of being asked to print and save, they are then asked if they would like to create a new record, if yes then it shows the userform again, but the userform is still filled with all the stuff previously entered. I tried using the unload me instead of hiding and that wouldn't work at all, didn't give errors just didn't show the userform either, this at least shows the userform, but now when the user goes to clear the information by initializing the userform again, it simply closes the userform and then it can't be shown again either.
[url]
This is the link to the ZIP, and here are some instructions for setting it up to work.
The contents of this need to be unzipped into a folder called SyntheticShield that is placed in the C: drive that way all paths begin with C:SyntheticShield and then the other folders or files will be referenced correctly. The template I'm having problems with is the SyntheticShieldInvoiceMaker template, when you open it you'll be prompted whether you want to create a new invoice, number is final blah blah blah, say yes, then it will ask if you are importing from the Quotemaker which you aren't say no, it should then show the userform as it should. Then you can go through that process and by pressing either the create invoice or go to template directly whatever, you can hide the userform. Then you press the command button (red) a userform is brought up asking if you'd like to save without emailing, save with emailing or close controls, as for right now, I'm just getting the save without emailing to work the rest is all the same just a few tidbits of code. So click save without emailing, it should then prompt an are you sure message box, click yes it will do some things, then it will ask if you want to print, click no, then it will ask do you want to create a new invoice, click yes, this should then start the process all over again by calling the workbook_open procedure, however, when you go through everything, and click no to the import from quotemaker part it won't show the userform. And at one point it would, but then I couldn't initialize the userform without it disappearing and not being allowed to be shown...I tried putting a command button on the template to show the userform, but it wouldn't do it either.