I have a column titled "Start Date", "Month/Year", &"Total". I want to count the number of dates that appeared in the "start date" column that have the same month and year of the "month/year" column. That count should be in the total count. For ex, I want the first total (april 2008) to be 1, the second (may 2008) to be 1, and so on. I tried using countifs month and year of the start date is the month and year of the month/year column. Not working.
The last part of my formula is throwing an error "K2:K57"
What I should get in plain English.... "The number of 'James Report' 'Completed by 'KP' in 'August'. (Any specified month based on what comes from my "dates field" on my Master sheet.
I have got a field in my Master sheet with dates which I have transposed into the right month of the year using Month().
I am trying to use a countifs function that counts all the instances where the year of the date is 2014. The dates are in date format like 3/13/2013, and contained in cells a2:a12
Here is my current formula which is not working out for me.
In attached sheet, I am trying to find total cost by month only for year 2009. Currently formula I have in Cell c24, is {=SUM(IF(MONTH(B2:B9)=1,D2:D9,0))} But this calculates for all years, not just 2009. How do I modify above formula, so for each month, it shows total cost but only for 2009?
I have two combo boxes: One for entering the Year, and one for the month. I can produce a message if the user leaves either box blank but I want a message to apear it the user selects a year AND month less than the current year (iYear) and current month (iMonth). I therefore need an AND statement between the two criteria but i dont know how to do it.
'....First Checks the Comboboxes arent blank then below Checks a future month/year secection is chosen
ElseIf YearBox.Value = iYear & iMonthbox < iMonth Then MsgBox ("You may not enter Data before the current Month") Else '...... Run main code here
I am working on a budget for myself and want it to have running dates so the first data column will have the current month. I was able to succeed with this using the EOMONTH function followed by EDATE functions in the following cells, I then have these columns filled using a nested VLOOKUP MATCH function pair.
The problem I run into is with the months that extend into the next year, in my data table I have month by month listed started on 01/01/2014 ending 12/01/2014 but as soon as the month is no longer January the last column in my budget cannot find the information needed due to it looking for 2015. so what I would like to know is if there is a way to make the data table change the year to the following year after today is beyond that month, so for example on March 1 2014 both January and February would be changed to 2015.
I have dates in my column “A”, for example (A1 cell =22-Mar-1971), (A2 cell=30-Dec-1965). Now my requirement is in B column date and month from A column and year should take current year. Output in B column (B1 cell =22-Mar-2009), (B2 cell=30-Dec-2009)
Is there a function to put in a new column to get the abbreviated year and month of a previous column in the same row???
Ex. Row A B C D 3/14/2007 5/16/2007 2007-3 2007-5
Instead of using the YEAR MONTH funcion for each row is there a universal function that I could designate to the whole column of C and D something like C=YEAR(A(row#))???
Need to create year to date sales comparing 4 years month by month. Stacked chart (Excel 2010) works OK for the first three months but adding the fourth month changes the chart to 4 series with a monthly axis. To put it another way I need a vertical axis of years and a horizontal axis of $$$ with each months sales of each year stacked on its year.
I have created a time sheet in excel (see attached) that will be part of the larger workbook that will be linked with other sheets to auto fill in most fields. I am wondering if there is a way for an user to enter a Month and a Year at the top of the page and that in turn automatically fills in the days of the month by week.
So in attached sheet there are 5 boxes representing 5 weeks in a month. So if we used May 2014 as an example I would like to know if there is a way that once May 2014 is entered in up to top that. Excel fills in the dates in Week #1 with under Thursday showing 1st, under Friday showing 2nd as on for the entire month...
So as the month go by all user has to do is state the month and year and excel fills in the weekly dates for each day in month.
This is for a report and on "Summary Worksheet" I want to post "Current Payment" totals IF the invoices from "Tab 3" equal the "month" in G6. Say the report is for January - if there are invoices on Tab 3 -worksheet with a January date I want to post all invoice amounts on Summary worksheet under current payment.
... in A1 a year (say 2012) ... in A2 a month, formatting as "MMM" (JAN, FEB, MAR etc.)
How to automatically get in column A (say from A3) all the dates of the month entered, formatting as "D/M/YYYY" (e.g. 1/1/2012, 2/1/2012/ 3/1/2012, etc.)?
Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
check out the COUNTIFS function on Data Tables Sheet -> Cell D29 and pls. let me know what's going on. I need is : To calculate the number of items on system data tab which has the "Pending" status and items which belongs to month "Jan-10" under a particular person selected from B 27 cell (Data tables tab).
I solved it by using >=01-01-10 and <=31-01-10 criteria but i don't think its nice idea .... I tried to use AND(function by got failed ...........
I use a certain portion of our workbooks to enter the due dates of certain equipment, which are always listed in month/year (e.g. 4/17), and which means that they are good until the last day of said month. That is, a due date of "5/16" is good through May 31, 2016.
I'd like for my users to be able to enter "5/16" and have that cell properly identify as May, 2016 (instead of May 16 of the current year)...more specifically, the last day of May, 2016. All of this so that I can conditionally format any cell where that date has past - that is, if my user enters "5/16" on May 15, 2016, it won't flag.
I'm trying to develop a formula that can incorporate the search function in amongst a countifs formula. I have a column that contans the string "2.3 Manage Project Delivery" in a single cell. However, a single cell could also contain this text string in amongst other text and be in there multiple times - E.G; "2.1 Manage Customer Support, 2.3 Manage Project Delivery, 2.4 Close Program, 2.3 Manage Project Delivery" etc
My formula currently looks like this: =COUNTIFS('RDC Register'!$AW:$AW,"Not Overdue",'RDC Register'!$C:$C,"2.3 Manage Project Delivery") but it's not counting the cells that have 2.3 Manage Project Delivery in it more than once.
So basically I need to modify my formula to search for this text string in the cell and add all occurrences to the final count.
I have a question regarding COUNTIFS. I have data arrayed vertically and horizontally on a worksheet. Date - Column 1 Column 2 etc. Criteria data (flight information) is listed under these columns. I'm trying to get the COUNTIFS formula to count the number of times a particular flight occurs within a date column.
My formula is
=COUNTIFS(C27:G24 (this is the field that contains the flight info), C6 (this contains the particular flight I'm looking for), C16:G16 (this contains the date range, C5 (this contains the date I'm looking for)
When I use this formula I get the result #VALUE! back. I also wanted to ask if there is any way to use the paste special function but not lose the original formatting/formulas from the cells one is pasting from.
I have the following formula in a sheet to record basketball stats that I am putting together.
=COUNTIFS('Running Game Log'!A:A,"=Jarod",'Running Game Log'!C:C,"=2 pt miss")
This formula counts from a list that is generated during in-game recording of stats & obviously counts the number of times "Jarod" misses a "2 pt shot".
My question is can the criteria "Jarod" refer to a value in a cell, rather than the specific name "Jarod" as I want to be able to change player names easily, rather than have to edit this formula every time.
I have yet run into another road block, which is stated below.
=SUM(COUNTIFS(AF20:AF111,{"*CoSale**","*Reo**"},AL20:AL111,{"Seller - Core","Seller - Non Core"}))
I can not get that formula to sum correctly. I can get them to sum if I seperate, but not with the countifs formula above. I am stuck at this point. So, any insight would be great. It is supposed to add up to 13, but I am getting a sum of 7.
This is the function I have now: =COUNTIFS(Sheet1!A:A,Sheet2!A2,(Sheet1!E:E),"*") and it works great, counting every cell with a value in column E.
When I make criteria range 3 another column (criteria also being"*") my numbers actually start going down. I think it might be averaging the two columns out or something but I just want it to count all the cells with values in it from multiple columns and give me a total count.
I have 4 columns total that I want to be able to get a total count from.
I am trying to develop a For Loop that will do countifs functions based on the criteria in the For Loop. Part of the countifs criteria is determining which values in a range are within certain dates. I have isolated the month and year data and am looping with for loops through the years (outer loop) and months (inner loop). The issue that I am running in to is how to place the month and year into the countifs in VBA: month/year. When I do these calculations in the spreadsheet it is easy to write for one of the criterias: ">=1/2013", but trying to do that same formula with variables is become much more challenging.
How could I write a countifs that uses variables to do the same as ">=1/2013"? In essence: ">=monthCount/yearCount".
As To Why This Is Giving The Answer Of "January Of 2009"? For All Answers. Sheet7
RS92/27/2009January Of 2009102/28/2009January Of 2009113/1/2009January Of 2009123/2/2009January Of 2009133/3/2009January Of 2009143/4/2009January Of 2009 Spreadsheet FormulasCellFormulaS10=TEXT(MONTH(R10),"MMMM")&" Of "&YEAR(R10)S11=TEXT(MONTH(R11),"MMMM")&" Of "&YEAR(R11)
I have multiple rows of data per each column. I'm trying to count rows that match a value that ISN'T any of the expected values in column A as well as a certain value in column G. This is in case future data is introduced that doesn't match the existing codes.
I'm trying to count all rows that DON'T have a value in column A beginning with PUA or P9V, so far I am trying this:
=COUNTIFS(A:A,"<>P9V*""<>PUA*",G:G,"P")
But it only seems to work on the "<>P9V" part. When I put P's in the column G of which the column A matches PUA*, it still counts the cell. I've tried a couple of AND variations but none are working.
Need to use CountIFs formula to evaluate multiple conditions in the same column. Here is the formula I tried. It works for Resolved but returns 0 when i try to add Duplicate.
Also used this formula with success by referencing a cell that had "Resolved" in it but when I tried to add another cell with "Duplicate" it again returned 0.
I am trying to create a master spreadsheet to sum up other tabs for the number of funds that are going operational by month. The date is formatted at "January 31,2013".
See attachment as an example : Client Schedule Example.xlsx
