I am trying to use a match function to determine which row information resides on so that I can update other information on that row but I am having problems setting up the match function.
The information is obtained from a combobox on a user form which identifies the correct address and then additional information is added to other fields on that line in the spreadsheet. PropertyListAll is a dynamic named range looking at the first column in the spreadsheet. the data starts in row 11.
My code is as follows, but I am getting error message 438. I am assuming I am referencing the workbook and named range incorrectly but I have tried various different combination all to no avail.
Code:
Dim wb As Workbook
Dim ws As Worksheet
Set wb = ThisWorkbook
Set ws = wb.Worksheets("Team Vals - Take ons")
rownumber = WorksheetFunction.Match(cboProperty.Value, ws & "!PropertyListAll", 0)
Sheet1.Range("tblTakeons").cells(rownumber, 2).Value = txtDate.Value
I have two sheets in my workbook, and I am trying to reference one chart's value into the other. (attached)
I have referenced successfully by manually typing in the reference on row 2 for all values on Sheet 1: Sheet 1 - C2 needs to reference Sheet 2 - B2. (Sheet2!B2) - no problem all the way across to F2. All those values are correct b/c I manually typed in the reference.
The problem comes when I just want to drag over that same formula to increment for the other cells. It's not incrementing the formula like I need it to.
So, Sheet 1, Row 2 shows how the correct values I need to pull over but was done in a manual way. Sheet 1, Row 5 shows how it increments incorrectly when I try to just drag/copy the formula over. What I need is for Sheet 1 - D5 to reference Sheet 2 - C3, but instead if I try and drag to copy the formula instead of manually typing it in, it increments when I drag reference D2 instead of C3.
I have a worksheet that changes monthly but has the same fields always. I have created a few macros, and one that is a 'RunAll' for ease of use. Sometimes there is an error and I have to go back and fix some data, So I am looking for a way to change the "SelectBzzAgent" Macro to link data to a new sheet instead of copying. I have attached my spreadsheet.
I have a formula to extract the worksheet name and add the "!" to it so it can be used in a copied formula... I'm just having trouble writing the formula to reference the text in the cell with the worksheet name. If it's easier, I also have the list of worksheets without the "!" - e.g., Sheet1, Sheet2, Sheet3, etc...
I want the formula to calculate, in my example, the sum of 2 cells on a different worksheet.
Maybe it's not as complicated as i'm thinking, but i'm trying to figure out a formula (or macro) that will let me basically fill in a blank from a (nearly) irrelivant second worksheet. The only similarity the two will have is a PO number, or in my picture diagram, it's a letter. The worksheet that i'm trying to fill in the blank from has maybe 1500 entries, the worksheet i am referencing to has roughly 11,000, so sorting it would make no difference and the columns would be very inconsistant with eachother, but the rows will be similar.
I want to start a formula in Sheet one, that looks at the Letter in that same row, finds that Letter in Sheet two, and gets information from the same row but a few columns over. I might be explaining this poorly, so here's a picture of what i'm referring to. I'm trying to fill in F6 in Sheet 1 with information from F2 in Sheet 2.
I have my inventory based in excel. Each brand has it's own file. Each file has several worksheets with all of the items, prices, etc. on them. When I get a shipment, I fill out the next worksheet in line. This way- I have a record of my inventory and a worksheet for each shipment. It has been working very well. The first worksheet in each file is a summary page that shows me the grand totals, shipping charge, etc. from each filled in worksheet page. the problem is I have to build that summary page for each worksheet I fill in.
I would like a way to tell excel to give the same information as I requested in the previous row, but the next worksheet down.
I'm having to copy formula on a tabulation sheet that compiles information from other worksheets, and I need to change the formulas in each row to refer to the successive worksheets. Right now I don't know any other way than changing the formula in each cell, and this is taking way too long.
Example:
One cell's formula: =COUNTIF('5'!$F$21:$T$50,TABULATION!C$5) In the next row down, I need it be: =COUNTIF('6'!$F$21:$T$50,TABULATION!C$5), then =COUNTIF('7'!$F$21:$T$50,TABULATION!C$5), and so on.
Is it possible to copy a formula and have the worksheet name increase incrementally instead of the cell reference? Example: In column A, I have the following -
I want to copy this across to column B, but instead of just copying that exact foruma across I am wanting a formula that will update the worksheet reference to:
TDI_SR_F_2 is the worksheet after TDI_SR_F_1. NB - I cant use find and replace function as it will change the '1' which is part of the cell reference ($G$1) to a 2 as well. I know I can use TDI_SR_F_3 as a search string, but the process is going to be extremely tedious, i.e. there are literally over 100 rows I need to do the find and replace on.
"Enter a formula that adds the total gross sales for the first quarter in cell B6 in the Q1 worksheet and total gross sales for the current quarter in cell G18 in the Q2 worksheet"
**First ungroup the grouped worksheet
How am i going to formula a total gross that i don't even know what is the first quarter? i don't see anything for first quarter? and in Q2 worksheet G18 i already did =SUM formula Ungroup the worksheet? i don't think my worksheet is even group?? how i ungroup it?
Currently I have a worksheet which is organized to have two pages on it. I will try to explain, i.e. imagine one page of the worksheet in the hypothetical range of A1:D26, then another page in the range E27:K50. So it is staggered on the same sheet. Is there an easy way to copy the range of E27:K50 onto another worksheet.
Aside from the regular copy and paste, I am having problems because there are formulas in the 2nd range (E27:K50) which loose their references once copied. i.e the formula SUM(A1:A10) I would like to be SUM('Master List'!A1:A10) on the new sheet. Is there an easier way then going through all the formulas and adding the master list part.
I was given a task to build a userform and all the info collected from the userform will then transfer to a worksheet named 'Promotion'. I was copying the code from last year's UserForm and with my 0 VBA background.
With the below code (I just extract part of it), the ideal case would be to transfer data to Cell A4 (which is the first blank cell on the worksheet), and when a second form is recored, it will start from A5, so on and so forth. But somehow, the code transfer the data to Cell A1001, and the columns don't match with the info either.
Private Sub cmdAddPromo_Click() Dim RowCount As Long Dim r As Long Const LastRow = 2000
[Code]...
The other thing is I don't really know why there is 'Me.' before each common buttons...
i want to change the table_array reference without changing formula in every worksheet. I tried using a new worksheet and naming it the same as what is referenced in vlookup table_array but it messed up all the data.
I have to use a different worksheet every month so need a way to change reference OR how to change array data without messing up the worksheets with the vlookup
In cell BQ65, I have 7:00 pm. Next to that, in cell BR65, I have 6:00 am. This should total 11.00 hours, yet with the formula I have in cell BS65, the result is showing up as 13.00 hours, so I'm ending up with two extra hours, which is not good.
Basically a cell might have a number with 3 decimal places
For Example 90.554, and i will format the cell two 2 decimal places. But when i use those cells which are formated to 2 decimal places in a formula it produces results based of all the decimal places in that cell.
Is there a way for the formula to only calculate the results based off of what is shown in the cell? . This is messing up our accounting area by alot of dollars since we sell many items.
I included an example of what i mean in this excel file which should clear up any confusion.
I have a workbook with 1000+ worksheets, all of which have 3-letter names. On a master sheet, I would like to make a query of how many non-empty cells there are on a subsidiary worksheet. This works:
Code: =COUNTA(ABC!A:A) What I'd like to do from time to time is input in column A a varying set of 3-letter worksheet names, say
AAB ABC CDE
And have a formula in column B that converts this to
I have the following formula in cell L51 of all sheets calculating the volume depending on the monthly index that is chosen from the drop down menu in a particular sheet. =If(MIndex=0, SUM(D33:L50),If(MIndex=1,SUM(D34:L50),If(MIndex=2,SUM(D35:L50), 0))). I am getting the following message and I do not understand what it is about.
Microsoft Office Excel cannot calculate a formula. Cell references in the formula refer to the formula's result, creating a circular reference. Try one of the following
A 'Days Attended' cell (N8) and a 'Days Absent' cell (O8). N8 needs to count the number of "Present" values there are on another worksheet. The other worksheet has dates across the top and names down the side.
When i use =COUNTIF("Attendance!C9:Z9", "Present"), and the next date comes along the formula changes to =COUNTIF("Attendance!D9:AA9", "Present")
ie. the reference moves a column across - the new date's absent or present is not counted. Using =COUNTIF(INDIRECT("Attendance!C9:Z9"), "Present"). is no good because when i add a new name i need the row reference to move down as a row is inserted. ie. both person's formulas count the same row. So, my question: I need the columns to stay the same - C:Z (leyway for future dates) and the rows to change as i insert or delete people from the system.
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
I have lets say 12 months of data. I have formulas that reference the latest 6 months. When I insert a new column to input a new month, how can I make the formulas include the new months without manually updating them.
EXAMPLE:
12 months of data exist in cells B3:M3 going from B3(oldest) to M3(newest). Formulas reference latest 6 months of data in cells H3:M3. When a new month hits, I insert a column after column M.I would like the formulas to now reference cells I3:N3 which is now the newest 6 months.
=INDEX(INDIRECT('Quote Detail IP'!$C$10&'Quote Detail IP'!$C$5&"!$A:$DC"),MATCH(B1,INDEX(INDIRECT('Quote Detail IP'!$C$10&'Quote Detail IP'!$C$5&"!$A:$DC"),,1),0),MATCH(A1,INDEX(INDIRECT('Quote Detail IP'!$C$10&'Quote Detail IP'!$C$5&"!$A:$DC"),1,),0)) Where A1= "M16" and B2= "185%RPIT630" 'Quote Detail IP'!$C$10&'Quote Detail IP'!$C$5=QxTermAge63 Can some on tell me why this is raising a Circular Reference!!
How do I change a formula cell reference based on another cell's reference? I'm building a schedule that looks to a task's trigger and adds days based on that relationship. All entries in column "A" will be text and all cells in "B" will be the simple formula "=A2" or "=A3". Due date is calculated by adding the value in "C" to the preceding date in column "D". In the spreadsheet below, the trigger for "Budget set" is "Specs written" with 3 days added to the previous due date.
________A________________B_____________C_________D 1 Task___________Trigger_____________Days_____Due Date 2 Design begins__Proj OK______________10____10-Jan 3 Specs written__Design begins (A2)____5____15-Jan (D2+C3) 4 Budget set_____Specs written (A3)____3____18-Jan (D3+C4)
If the trigger for A4, "Budget set", changed from A3 to A2, is there a way that the formula that determines the due date in D4 could read the trigger cell reference in B4 so that the value in the corresponding row in column "C" is added in the date column?
Faulty example of what I'm trying to do: =COUNTIFS('WORKSHEETNAME'!A7:A1000,">12/31/2010",''WORKSHEETNAME'!A7:A1000,"<1/1/2012",''WORKSHEETNAME'!F7:F1000,"Excluded")
I've tried INDIRECT, but I cant seem to make it work.
I am writing a macro that will use information from the worksheet in use and the one prior to it. The problem is I do not know how to reference the worksheet that will always come before the worksheet in use. To fill you in, I have a monthly budget worksheet that tracks all my monthly financials. What I like to do is compare this months balances (cash, equity, bonds) and see the amount of loss/gain and percentage from the month before.
Here is what i currently have implemented.
This macro was written in the month of October. For this function the macro I wrote will take Octobers cash balance and subtract it from Septembers cash balance. This will give me the gain or loss. Now the problem is if I were to run this macro in November it will still reference September not October. I always want the macro to use the month before (the 1st tab to the left) not a specific tab. I wrote this macro using relative references so I do not understand why it will not use the tab before. Can someone please shed some light on this for me?
I want to select a specific worksheet by it's VB name. In other words, if the sheet comes up as: Sheet3 (ESF) in the VB Editor, I would like to choose it using the Sheet3 designation. I can do it using the (ESF) designation using:
Sheets("ESF").Select
But I prefer to use Sheet3 so when the users change the name, the macro still works.
Been having some trouble with this using VBA. I can't seem to get the code to run properly.
Actually, if there is a way to get a right footer on one worksheet to be referenced in a cell on another, that would be even better but I haven't been able to find anything like that.
I need a VBA code to reference the cell value to activate a particular worksheet name. In the sheet "Ini", Range ("B4"), there is a text of "Rawdata" This text is used to reference to the specific Sheet name and activate it.
However, I am unable to get my code to work. Thus, I changed it with a ' with green highlights for the following lines:
I am trying to use a match index formula to retrieve some data from another workbook...I am wondering if I can use a worksheet name as an IF condition, i.e. I want my match index formula to search the entire workbook, and return values for which there is a match, with the IF conditions being a specific code AND worksheet name.
