I am trying with no progress to join these parts of code to shorter part - to obtain formulas in format = 1 234 (for 1'123,342) in one. note, it is running after Application.Calculation = xlCalculationManual . It will makes my code much easier to read.
View 1 RepliesI've got a workbook that includes a Check Register worksheet. Column K of the Check Register worksheet has formulas that maintain a running current balance. So Column K has numbers (calculated) from K12 down to the last transaction (K461 is this instance). Cells K462 to K2000 contain formulas awaiting to be calculated.
I've written a procedure to "Create New Year" and in the process, I want to capture the value of the last calculated value in Column K from the old year. I cobbled code from different websites and have come up with this code
found a great macro which copies data from multiply worksheets and pasts them onto master sheet.
I have adjusted the macro to my spreadsheet, but my macro should past formulas as values.
I need to paste the format and formulas of the last row of data into a new row beneath it. I've seen a bunch of different end row functions, but which one is best and how do I only paste the formulas and formatting?
View 8 Replies View RelatedI have an existing macro that copies a worksheet and pastes it into another workbook, renames it and then attaches it to an email. My problem is that it pastes just the values. I need it to paste part of the original worksheet as values and part copy the formulas. So on the new workbook Columns A through F will be values only and G through Z will copy the formulas.
View 10 Replies View RelatedI have a macro that pastes formulas as values on specific pages (("CTY EME", "Int Center", " Total SW dist cost", "Int, pubs & oth", "Total". Is there a way to compress the macro ie with the sheet names?
Sheets("CTY EME").Select
Cells.Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Range("A1").Select
Application.CutCopyMode = False
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
I've created a model starting from on another person's workbook, and I'm seeing an issue I haven't seen before.
For instance,
A1 = 10
A2 = 1.5
A3 = A1 * A2 = 15 (all good, so far)
If I change the number of A2 to 0 decimals places, the value shown will be 2 (which is correct, of course), but the value of A3 becomes 20. I would like for this to stay at 15 because the correct value of A2 is 1.5, not the rounded value of 2.
I would like a macro that will select the 65536th row to be used to paste format from rows 2 to the last empty cell in column a.
View 5 Replies View RelatedI have a macro running this code to strip out unwanted formulas and formatting.
Sub Quote_Wrapup()
'To stop screen flicker
Application.ScreenUpdating = False
Range("CDandC").ClearContents
Range("qdata5,qdata6").Font.ColorIndex = 2
'To delete delivery address lines if 1st line empty
If IsEmpty(Range("deliver_line1")) _
Then Sheets(1).Range("deliver_rows").EntireRow.Delete
'No End If required as only one action as a result of the If
Range("Item_Nos").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
Columns("A:E") = Columns("A:E").Value .........................
A spreadsheet based on my template has been sent to me because the macro won't run properly. When I try to run the macro I get a Runtime Error '1004' Method 'Range' of object '_Global' failed on the following line. Columns("A:E") = Columns("A:E").Value.
I'm exporting a csv file from a membership database with the attendance of members. With a macro i open the file and copy the contend to excel. With the macro the column for the date has *randomly* wrong formats. Example the date in column B:
Aasia Tallah19-03-2009 19:33
Aasia Tallah17/03/09 7:49 pm
Aasia Tallah15/03/09 7:53 pm
Aasia Tallah14/03/09 6:34 pm
Aasia Tallah03-12-2009 20:05
Aasia Tallah03-11-2009 19:56
Aasia Tallah03-10-2009 19:54
I try to change the format of the column, but that does not work. Rows 2,3 and 4 seem to be text but they are not. If i access the edit bar for example the 17th of march and store without changing anything, it changes to the format of the first row. That is how i want it. If i copy the column by hand, every thing is fine.
All of the following i tryed:
- format date column of the csv before copying... failed
- copy special with only pasting values... failed
- preformat the column i paste the date to... failed
- delete the sheet i paste to and create a new one... failed
- copy the macro to a new workbook... failed
I am trying to write a VBA macro that will mimic what i have already done in an excel worksheet i have made. The excel worksheet uses inputs for a heat exchanger and finds the temperature as it leaves the heat exchanger. This temperature is then the new input for the second line of the worksheet and it changes quite a few of the values in the sheet. I have the excel worksheet working where you just drage the row down and it does it automaticly, but i would like to have a VBA macro that all the values can be input in with the number of cycles until the heat exchanger equalizes out.
I am able to get the macro to work when it calculates just the first cycle, all the equations work my variables are ok for just one time. What i don't know how to do is make my program realize that it has to use the calculated temperature out of the heat exchanger as my new input for the heat exchanger. I know how to do it once so it is more of a syntax or understanding of a loop or an array for the values that are changing.
I have a range which has conditional formats based on other cells. I want to copy this range into another sheet and retain the current formats as fixed formats without copying the conditional formulae. ideally in VBA.
View 5 Replies View RelatedI have made spreadsheet that calculates my total cost of making ice cream mix based on ingredient costs of two variables (Van_Gal, and Choc_Gal), for example 550 gallons and 750 gallons respectively. The worksheet calculates the total cost of making the Vanilla Gallons and the Chocolate Gallons. I’m not a VBA or Macro wiz, and now I’d like to Make a macro that will allow me to make a “table” of calculated costs associated with different assumed Vani_Gal and Choc_Gal amounts and then print the values; and then go down a row and print the cost of another amount of Vani_Gal and Choc_Gals until some preset end has been reached. For example:
Van_Gal; Choc_Gal;TOTOutput;avg cost
550; 750; 1300; $4,000.00; $3.08
600; 700; 1300; $4,250.00; $3.27
Let’s say that I want to know what the tot cost and avg cost per gallon for various combinations of Vanilla and Chocolate Mix from 550 V and 750 Choc for various combos and have it increase in iterations of 10 Gallons (i.e. 560 Van and 740 Choc); Maybe I'd use a " loop" that repeats calculations and prints them for different combinations of Van/choc until 800 Gals Van and 500 gal Choc. Once I have a table of values, I could sort it and find an optimal production level (with the Minimum avg cost). how to make a macro that can crank out a table like this?
I want to copy everything on several sheets to one sheet.
I do not want to carry the formulas (some are absolute)
I do want all data. formatting and layout (cell fill, merged cells.....)
A fairly simple one I imagine but I've never come across it before, so I ain't sure what to use!
I am working on yearly budgets/balances, and where the total spend against a budget has gone over the budgeted amount I want my formula to format the text red.
Example
Budget Spend Variance
30 35 -5
The formula is also doing a sum of budget minus spend, so if the result is below zero the text needs to be red basically.
I want to be able to open the Excel spreadsheet, and have some easy way to post formulas into that document. I was thinking a Macro would work, but I cannot seem to find a way. Columns A through V contain the data that is exported from the payroll system. I want to find a way to paste my formulas into W2:AH200. The formulas will always be the same.
I'd like the user to be able to:
1. Export the payroll information to Excel and open the document.
2. Run a macro (or some similar action) to place the formulas in W2:AH200 into the spreadsheet.
3. Input data into AH2, AH3, AH4, and AH5.
A sample document is attached. Columns A-V are what get exported by the payroll system, and W-AH are my formulas I've added to this sample (and what I want to be able to easily add to new spreadsheets).
How pasting values/formulas only works. I have a spreadsheet I've been using to record product sales, commission, shipping etc. It currently has three pages of records. But now I have a new spreadsheet I want to use with basically the same 'look' as the old one (same columns, entries per sheet, etc) but using better formulas. I don't want to manually input all the data from the old one and I thought I could copy all the cells from the old one and then paste values only into the new one. But when I do that, it pastes the values but also deletes the formulas in the new one. So then I thought I could copy all the cells from the new and paste only formulas into the old one but then it deletes all the values in the old one. Is this what is supposed to happen? And if so, is there a way to achieve what I want?
View 1 Replies View RelatedHow can i change this code to paste values not formulas?
Code:
Private Sub Admin_Click()
Range("BO40:CI73").Clear
Dim rng As Range
[Code]....
I have setup a forecast model and now find it necessary to update many formulas
I have set period 1 formulas correctly and would like to copy through periods 2-12. However each period has already been populated with data that need to remain intact in this process
For example,
I have formulas to copy at I5 and I9. I6,7,8 should be skipped
These formulas should be pasted to K5 and K9 respectively, while leaving K6,7,8 intact
This is of course a simple example, the column contains 15 formulas to be copy/paste
Is there a way, WITHOUT VBA, to have a cell turn color if a user overlays a function with a value. Using conditional formatting or an easier way if possible, I would like to have any cells that the user overlays with a number to have a different background color.
I know I could use an event-driven macro but am trying to find a function that can check a cell to see if it contains a formula (or function) or a value.
I would like to add another step that pastes the formulas copied from the active sheet, to specific ranges of cells.
I would like the PasteSpecial XlFormats to apply to all cells on the active sheet, where as the PasteSpecial xlValues would only apply to all cells not in the ranges that the Formulas are getting pasted into.
Also for formatting purposes I have a few cells that are merged in the active spreadsheet, that unmerge when I run the macro. Ideally I would like any previously merged cells to stay merged once the macro is run.
Below is the VB I have...
VB:
Sub SaveSheet()
ActiveSheet.Copy
With ActiveSheet.UsedRange
.Copy
.PasteSpecial xlValues
.PasteSpecial xlFormats
[Code]...
I have created an Excel template for others to use. They can enter data in certain unprotected cells and the data is linked to other places in the workbook. If they Cut and Paste something in the unprotected cells, the formulas get a REF#. There is no problem if they Copy and Paste. How can I prevent the REF# error without resorting to VBA?
View 3 Replies View RelatedIs it possible to disable the auto filling, when copy/pasting formulas?
I have a range of formulas, which I want to copy/paste, and I want the pasted formulas to be the exact same as the copied.
Is this possible? I would prefer not having to use $ on all formulas.
I need some VBA to copy row 2 then paste it (including formulas) into the next available row in the same sheet but then also clear the data in row 2 but retain the formulas.
View 2 Replies View RelatedI've got two pieces of code.
1. cuts+pastes all formulas and formats to another location.
2. cuts+pastes required formulas but not cell formats to another location.
The s/s is over 330,000 rows deep which makes manual changes impossible.
I attach small s/s containing both codes.
What I want to do is copy+paste formulas+formats from cells having a number in the cell below to cells 4 columns along and two rows down. The s/s illustrates this.
I have the following macro that copies data from a calendar-style setup on one sheet and pastes it in a contiguous list on another sheet:
Code:
Option ExplicitSub move_daily_data_to_ordersvstips()
Dim OutSH As Worksheet
Dim findit As Range
[Code]....
I would like only the values from the "Data by Month" sheet to paste to the "Orders vs Tips" sheet. However, all my attempts are returning various errors/inconsistent results.
I have a formula which i need to paste into a worksheet, doing this is tedious and boring to say the least, problem is i am not sure how to get the macro to skip blank lines and only insert the formula where there are prices. Each week the worksheet changes so there is no consistent layout.
View 9 Replies View RelatedI have a workbook which contains 12 sheets, 1 for each month of the year. I also have over 100 sheets, 1 for each agent that covers their stats for each month of the year based on some of the cells from the monthly sheets.
I am trying to drag the formulas over but it will always just refer to January, instead of January and then next cell refers to the February tab, etc, etc.
This is probably a simple one but I can't figure it out. I am building a workbook from scratch. It has about twelve of thirteen tabs at the bottom. On one of the tabs I would like to copy and paste a stand alone worksheet. The worksheet functions properly when it is stand alone. However when I copy and paste the worksheet into this new workbook none of the formulas transfer with it. I do get the cells filled in, but I would like to get the formulas.
I have done this before and it worked fine. In fact I can open a new workbook and copy / paste the worksheet into it and everything works fine. Again when I copy / paste it to this new workbook the formulas do not transfer.