VLOOKUP #N/A Error Between Workbooks On Separate Drives
Nov 20, 2007
I have 5 worksheets in file Z on drive J which are full of VLOOKUP formulas pulling data from several files on drive K. Each worksheet pulls data from it's own file on drive K...ie, worksheet AB pulls all of it's data from file AB_2008, etc. On worksheet CD there are two rows which populate with #N/A when I open file Z, but if I open file CD_2008, the #N/A's automatically populate with the correct values. Any ideas??? I am not a programer but I have pretty fair excel skills...but this one has stumped me.
Here's my formula:
=VLOOKUP($A19,'K:sopworkbookssop_2008[sop_2008_rt.xls]11-RT-PPR'!$A:$BQ,C$34,FALSE)
View 9 Replies
ADVERTISEMENT
Nov 17, 2008
I have 2 separate workbooks and I would like the Vlookup function to look for the value in "DO" after matching the both "Job Sheet". I have attached 2 files for better understanding.
View 4 Replies
View Related
Feb 25, 2013
I have 10 very large workbooks that are all setup in the same format. In column Z is a numerical value from 1 to 83. I have been trying to filter the sheet and then copy one at a time from 1 to 83 but that takes a LONG time especially when there is 10 workbooks to do.
Is there anyway I can run a function or macro or something that would just automatically look down the column Z and put each row into a it's own workbooks?
I have attached a sample of what the workbooks look like right now.
Sample123.xlsx
View 4 Replies
View Related
Apr 23, 2014
I need to separate row data from one workbook into separate workbooks based on cell data. Currently I filter the data, copy and paste it to a new workbook and save it. It's a tedious process and was hoping to find a way to automate it. I have attached a sample file. In this instance, I would like a separate workbook for the filtered data in Column 1 and then all the row data gets copied to new workbook. So all of Pennsylvania data would get copied to new workbook, then all of the Michigan data gets copied to a new workbook. I have also attached an example of the end result that I need.
View 9 Replies
View Related
Mar 28, 2013
I have 24differnet workbooks each with one sheet with data. Each sheet has the sae headers with differen amounts of info under the headers. I am looking for a quick way to get all 24 sheets in to one workbook instead of copying and paste.
View 3 Replies
View Related
Feb 20, 2009
I am trying to find a way where I can just enter the information into one and have it flood to the other.
worksheetA is the master sheet which contains data on all accounts - the order and number of entries on this account changes monthly.
worksheetB shows data only on a single account.
What I am looking to do is to take the account name from worksheetB find the data I entered in worksheetA and have that flow to the apporitate cells in worksheetB.
Something like this
cell on worksheetB displaying number of vehicles - if worksheetB(cell with the account name) = worksheetA(range of cells with multiplenames) if the two match somewhere on the list then display the number of vehicles from a cell in another coloum same row.
sorry if its confusing, tried my best to explain it. I'm sure it can be done with VB but just don't know that one much, is the syntax and language similar to the old ms basic?
View 7 Replies
View Related
Dec 6, 2009
I have a workbook which have worksheets say A to J. I wanted it to be separated into 10 different workbooks A.xlsx, B.xlsx, C.xlsx and so on in drive C. Could anyone help me here?
View 6 Replies
View Related
Sep 26, 2013
I would like to separate data into multiple workbooks based on a unique value in the column. For instance if I have Departments in Column F, that has data of accounting, HR, etc. I would like to put all accounting data into a accounting workbook and all HR data in a HR workbook.
View 4 Replies
View Related
Dec 1, 2009
I have 2 workbooks open and I want to set up formulas from one linking to the other. When I toggle on the task bar between the 2 workbooks they replace each other within the same window so I can only see one workbook at a time. How do I set it up so I can have 2 separate windows open at the same time, one with each workbook in it? I tried 'side by side' in one window but the viewing area is too small.
View 9 Replies
View Related
Sep 14, 2006
I have a workbook with multiple sheets and I want to make these sheets into separate workbooks. I need them to be saved in the same path as the original workbook and automatically named (same filenames as worksheet names). I tried a code from a VBA book, and I got "Object needed" error message.
View 3 Replies
View Related
Feb 18, 2014
I have workbooks based on the date. Here is an example "Daily Numbers Report - Summary_2014_02-18-06-02-30"
All of the files are formatted this way. Then, in a master file I have dates going horizontally for the entire year in the following format Tue Jan 15, etc. How could I do a lookup that would grab from all of the open files and match the date BUT subtract 1 day from that date for all the lookups, so Feb 18 would look at 2-17?
View 5 Replies
View Related
Jul 7, 2009
I have a large workbook with many worksheets which are all grouped into pairs - i.e. Sheet1 & Sheet2 go together, Sheet3 & Sheet4 go together; Sheet5 & Sheet6 go together, etc. etc.
I need a macro to divide this workbook into separate workbooks where each group of worksheets has a separate file of its own and I want to name the new workbooks after the second sheet in each group:
i.e. A new workbook for Sheet1 & Sheet2 called Sheet2.xls; a new workbook for Sheet3 & Sheet4 called Sheet4.xls; a new workbook for Sheet5 & Sheet6 called Sheet6.xls; etc. etc. etc.
View 12 Replies
View Related
Mar 12, 2008
I have created a workbook for a co-worker. The way it works is data comes from an outside source with customer names in Column A and their Account Reps in Column H. This data is pasted into a template that I created with a very simple macro recording that filters on each Account Rep and is copied and pasted each into a different workbook. Then I had to go through each workbook (because of the info being sensitive) and create a macro that deletes the unwanted data because when the data is pasted it transfers all of the data and you can unfilter to see the full sheet.
I know there is a better way to extract data on each change in column H into a new workbook. Does anyone know how to do that? Another issue is the original data is not very clean so there are blank rows in the list. For Example:
CustomerTechnology SegmentOpportunity Dollars ($)Opportunity StatusAction Item(s)(ST) or (LT)Due dateAcct RepCustomer 1Action 1ST3/30/2008ACCustomer 2Technology 1Action 2LTTBDACCustomer 3Technology 2$10,000FindAction 3LTTBDACCustomer 4Technology 3FindAction 4LTTBDBHCustomer 5Technology 4FindAction 5LT1/31/2008BHCustomer 6$30,000Action 6LTTBDBHCustomer 7Action 7LTTBDMJCustomer 8Technology 5$10,000QualifiedAction 8ST3/1/2008MJCustomer 9Technology 6QualifiedAction 9ST2/28/2008CGCGCustomer 10Technology 7$18,000FindAction 10ST3/1/2008CGCustomer 11Technology 8$10,000QualifiedAction 11ST3/30/2008BHCustomer 12Technology 9FindAction 12LTTBDACCustomer 13FindAction 13LT3/15/2008AC
View 9 Replies
View Related
Nov 7, 2008
I have a issue at work where I can Map Drives but then when i reboot/log out the drives do not re-map. I have checked "Reconnect On Logon" but that does not work. I have called up IT and they just beat around the bush.
I am wondering, if there is a way for me to create a Macro to Map drives?
Also, for the macro to check if the drives are already mapped, if so then map it, if not then to skip mapping this drive.
I am hoping this can be made as convenient as:
X = C:Documents and SettingsPratikDesktopTest1
B = C:Documents and SettingsPratikDesktopData2
Where the X / B specify the drive letters.
View 14 Replies
View Related
Nov 16, 2011
I'm trying to automate a search and match function between two separate workbooks using VBA and am having some problems. I'm using the following line:
search_results = Application.Match(temp, Range("E1:E900"), 0)
which works fine. now the problem is that when i'm searching for lets say "ABCD" in one of the workbooks, if there is an entry "ABCD " (with a space at the end) it says that the entry doesn't exist. is there any way of correcting it such that it would always neglect the space at the end if it exists? i tried using -1 instead of 0 and it messes up, so i'm not sure what to do.
View 2 Replies
View Related
Oct 1, 2012
I need to copy a range of cells from various columns/rows from 1 sheet into 6 other sheets, but into a specfic range of cells(in the same workbook). I am looking for a code which would copy the cells, then allow me to save the sheets it has copied them to as seperate workbooks without loosing the values it copied. I would also like to make amendments to the cells which have been copied onto the other sheets, without having an error message if I type anything into the cells, also having any blank cells left blank rather than placing the 'o' value in the cell.
View 2 Replies
View Related
Sep 12, 2013
I'm linking some data from 2 workbooks in the same folder (using excel 2013)
I have a main rota that works great, called "Main Rota.xlsm" I then have a separate basic file called Email Rota.xlsx without all of the bells and whistles of the Main Rota, purley made to email out to staff.
I store both files in the same folder "Site Rota" and it works fine.... until I rename the folder or move the folder to my laptop.
The link in the Email Rota looks like so to start (calling cell A3 from the Main Rota) ='[Main Rota.xlsm]Planning Rota'!A3
As I said it works fine until I move the folder onto my laptop the link then changes to
='D:DesktopSite Rota[Main Rota.xlsm]Planning Rota'!A3
And I have to keep updating the link, I have read online that it isn't supposed to work like this and its supposed to read the file "cleverly" in the same folder ?
I would ideally like to keep both files in the same folder and to update from visa versa without having to update the links if I move it from PC to laptop with I do daily .
View 1 Replies
View Related
Jun 15, 2007
The Code below searches for a file and displays how many files by that name it found.
Sub Test()
With Application.FileSearch
.NewSearch
.LookIn = "C:"
.SearchSubFolders = True
.Filename = "Temp.txt"
If .Execute > 0 Then
MsgBox ("Success: " & .FoundFiles.Count)
Else
MsgBox ("Fail")
End If
End With
End Sub
However, Flashdrives are a common use among those that will use the code, such that I need the code to not only search the hard drive C: but all hard drives and flash drives. Using .Lookin = My Computer did not find the files stored on my Flash Drive.
It finds it using .Lookin = "K:" but I can not rely on my flash drive always being K:. It does not find it using .Lookin = "PumaFlash" (Name of flash drive)
I'm looking for one of two things: Code that will Search all hard drives and flash drives (optical drives can be included) at once Code that will Find path for all hard drives and Flash drives and then search them separately
View 2 Replies
View Related
Dec 20, 2013
So the problem is that I have two workbooks: one has a set of identifying values which are a subset of one of the sets of values in the second and I need to match them up. In addition I need to take the values two columns to the right of the matched values in the second workbook and put them in the first.
Here is what my formula looks like now.
=IF(A5=VLOOKUP(A5,'[WBOOK2]Sheet1'!$A:$A,1,TRUE),INDEX('[WBOOK2]Sheet1'!,MATCH(A5,'[WBOOK2]Sheet1'!$A:$A,0),3),"NF")
Whenever I try to run it an error message comes up and highlights the match function name.
View 12 Replies
View Related
Jun 13, 2013
I am trying to make my macro more dynamic for a spreadsheet I am working on. I have this code which splits out worksheets (using the specific names of the worksheets-not dynamic) from a main workbook into template workbooks (which are basically just an empty workbook because I didn't know how else to do it) and then saves them using the paths below. I would like to make this more dynamic by splitting the different worksheets into new workbooks based on a key column in the hierarchy worksheet.
Basically I have a list of accounts in column B with the file name they should be exported to in column A. There are about 30 accounts being split into 6 different region files. Also note that the same account might be listed multiple times in column A (needed to add multiple numbers for other lookup formulas in the worksheets) but that account worksheet will still only be going to one of the six region files and not to multiple regions. After these are copied to an individual file I would like to save it to a location on my computer. All files will go to this location.
VB:
Sub Create_Subfiles()
Dim FDMName As String
Dim FBName As String
Dim DIYName As String
Dim WMName As String
[Code] .....
View 3 Replies
View Related
May 24, 2014
I have 30 xlsx files in a folder and I want the first sheet of all that files to be merged to a new workbook. The thing is I don't want the macro to copy paste the value in to the same sheet of the new master sheet like Ron's excel merge tool does. I want a macro to create new 30 sheets on the master file and copy the data from source files. And I want the newly added sheets to be renamed as the source file name. This works well except the sheet renaming thing.
Sub Merge2MultiSheets()
Dim wbDst As Workbook
Dim wbSrc As Workbook
[Code].....
View 1 Replies
View Related
Jan 10, 2014
I need to write a macro to split an excel file into separate workbooks and automatically email our project managers.
View 1 Replies
View Related
May 27, 2014
My office just upgraded from office 2007 to 2013. I went through my normal routine, adding back in settings and Add-ins. Everything seemed fine. I rely heavily on Aaron Blood's Explode Add-in. It seemed to work. If I open a local spreadsheet it works (same with ledger shade and some other personal add-ins). However, when I open a file on the network, the explode and ledger shade add-ins do not appear. My personal add-ins do, but I have set myself as a trusted root source. I am sure I have a security problem somewhere.
I went into the trust center/trusted locations and set my network drive (and it's subfolders) to be a trusted location. That did not seem to fix it.
I also tried copying a file that does not work on the network to my local drive to see if the add-ins would work - once on my local drive they do work. Also if I open a blank or local file, then open a network file, the add-ins are still there and working.
View 1 Replies
View Related
Nov 5, 2012
how to create a list of the drives on my computer using VBA. Maybe I missed something.
View 2 Replies
View Related
Nov 9, 2009
I currently have this code that allows me to print a word document on one of my drives with the click of a button in excel. I need to modify it because one of the files I want to print as well is a pdf file. how to modify it so I can do that?
Set appWrd = CreateObject("Word.Application")
Set docOpen = appWrd.Documents.Open("F:groupsdeptservCDTISA.doc")
docOpen.PrintOut
docOpen.Close
appWrd.Quit
View 9 Replies
View Related
Mar 13, 2006
I have a sheet set up with names. I have 2 other sheets with spouses and
children that belong to the first sheet. I want to insert a formula that
will look up the correct spouse (based on a member number) and put in it the
column. Same with the children. I tried the vlookup function, but it did
not return the correct result.
View 14 Replies
View Related
Jul 3, 2012
I am trying to combine data from two separate worksheets onto one so it can be sorted for printing. Using the macro recorder, and the search function on the forum, I managed to ham-fist my way through most of it - except for one issue.
How can I have Excel/VBA go to the first open cell in column A before it pastes the 2nd batch of information? I get an "object required" error with the MyRange variable.
Code:
Sub UpdateSortedTab()
Dim MyRange As Variant
' Removes Old Information
Sheets("Sorted").Select
Columns("A:E").Select
Selection.Delete Shift:=xlToLeft
' Copies Bench Stock Information
[Code] ........
View 5 Replies
View Related
Apr 8, 2014
I am trying to do a Vlookup between 2 workbooks. I've tried a couple different ways and none seem to be working.
From the inventory workbook I need the Stator and Rotor SN's, O.D. and I.D. only for the ones that have the Status "SHOP" to come up on the Comparison Workbook.
Attached is the two workbooks.
View 7 Replies
View Related
Jan 13, 2013
I want to link two workbooks together with the aim that when a option is selected in a drop down menu in workbook "band form", it auto populates the rest of the form with data from the second workbook "showsales2013". date, ticket price, support acts etc etc.......
as a example,the drop down in workbook "band form" is a list of bands (list data also taken from showsales2013) ive got this bit working ok (i think ), each band is playing on a different day so i have used this formula to get the "date" from "showsales2013"
=VLOOKUP(F4,[ShowSales2013.xls]Sheet1!$1:$65536,4,0)
this seems to work until i insert a new row and/or column (in the showsales wookbook - which needs doing from time to time as new bands get booked to play), then i get #REF in the date cell on the "band form blank".
i used pretty much the same formula to pull the other needed data (price/support acts etc ) from showsale2013, and the result is the same, #REF.
View 5 Replies
View Related
Mar 30, 2007
I have looked through the forum and haven't been able to find an answer. I have two workbooks. One has a worksheet with two columns - the first column holds ID's, the second column has the names associated with them. My second workbook has a large table with many different fields and ID's only. I would like to use Vlookup to add the names to the second workbook.
View 2 Replies
View Related
